Search results for query: *

  1. S

    Curious what's out there for a header for my 440 dart sport

    If I build another car I’m going headman hustler.
  2. S

    Curious what's out there for a header for my 440 dart sport

    I can tell you from first hand expirience pro parts partial fenderwell headers are a pain in the A$$
  3. S

    Looking for my 74 dart sport 440

    I lost my job back in 2012 and had to sell my car and haven’t had one since. Really sad when hot rods are your life! Lol. Sold my big block dart sport to a guy here in Texas and he traded it to a guy in Anniston Alabama. I’ve lost contact with that guy. Anyone knows anything about it that...
  4. S

    stealth heads vs edelbrock heads

    My Stealths are 2 yrs old I had them conservatively hand porter, a serdi Valve jobdone and flow benched. Before the vj the low lift numbers Weren't very good. ( I don't have the sheet here) but improved Dramatically after! End result was really good 400 number,290ish at 500 And 304 at 600...
  5. S

    440 solid cam and lifters

    comp cam solid flat tappet for big block 250 255 530 540 108 with matching lifters in order.one bolt cam. broken in perfectly with outers only. i bought it to use in my engine but have decided to go another route. 110.00 shipped conus thanks. Dallas tx Would trade for power to manual...
  6. S

    weiand RB tunnel ram manifold and new 650 holleys

    guys i HATE to do this but finanaces for sale. weiand tunnel ram for RB chrysler pn 1987 and holley 650 double pumper carbs for sale. the manifold has had the upper to lower opening port matched. (common to have a step in the castings from the factory). and the port exits gently cleaned up and...
  7. S

    pro parts fenderwell headers for sale

    There is no pitman arm issues with these Headers. Thank you
  8. S

    pro parts fenderwell headers for sale

    Sold pending funds. Thanks!
  9. S

    pro parts fenderwell headers for sale

    Famous bob can you send me a pm with email address please thanks!
  10. S

    pro parts fenderwell headers for sale

    pro parts semi fenderwell headers for sale. 2inch primaries. no damage or road rash. these were an older set (2002) and i just had them professionally ceramic coated inside and out. have not been installed since. number 4 tube has been massaged a little for spark plug clearance but other than...
  11. S

    440 Fender Well headers ?

    Anyone run the Herman hustler fenderwell headers? I'm thinking About selling my proparts that I just coated ( beautiful) and Getting the hedmans. I want better plug access. I think The tires hitting the tubes is better than hookers..?
  12. S

    452 heads

    Was a torker2 Holley 800. 2inch pro parts. 5k shift point 440ci
  13. S

    452 heads

    I made 325 horse at the tires with a 228 465 110 hyd cam! 370 tq at the tires! WITH THESE heads. Convert those numbers. Factor in a real Cam! These heads make power.
  14. S

    452 heads

    my buddy larry parks ported the heads. he is a big time pontiac guy in the dallas area. we have a local head porter that bought AFRs old superflow bench so its legit. the stock valves are backcut and the heads are not fully ported. my guy just knows what hes doing. ive sent him a message to...
  15. S

    452 heads

    I am the seller of the heads in question. I don't have a sheet In my hand but I can get it. These heads have killer 400 lift numbers too Let me get the sheet. These heads were on a real superflow Bench BTW
  16. S

    BB roller rockers for sale

    Sold thanks fabo
  17. S

    BB roller rockers for sale

    B/RB CAT or PRW stainless steel chromoly knock off roller rockers for sale.ive got a nice set of comp cams pro magnum knock offs that are 1.5 ratio.these have nice hollow adjusters that oil from the shaft like stock and use ball/ball pushrods. these rockers are bushed. they do not come with...
  18. S

    C body 727 into A body. Any Issues?

    Ive got a 77 newyorker trans in my 74 dart sport and no Issues. It does some tabs and ears on the bell that i want To cut off to make working on the car easier!!
  19. S

    RB and a roller Cam

    I had a brand new herbert roller and sold it before i put it In due to the cost. Glad i did. There are tooo many fast guys Running solid flat tappets and doing it cheap! Those purple Cams work! Theres somthing to say about 30yrold tech
  20. S

    wheelwell trim for 73 up A body for sale

    ive got a nice set of driver quality wheelwell trims for 73 up dart sport. some dings here and there but overall good condition. 40.00 plus shipping for all. pm here or [email protected] thanks
  21. S

    lokar detent cable for 727 for sale

    LOKAR 727 throttle valve cable setup for sale like new condition cable and all brackets you need complete kit.. turn key ready to go.get rid of those ugly hard factory throttle valve brackets and rods.. setup for holley but easy on carter. 40.00 shipped conus pm here or email...
  22. S

    m1 vs torker 2

    Sorry to hyjack but tell me about that car and whats It run like? Im building almost the same Thing!
  23. S

    B/ RB comp solid cam for sale

    Price dropped to 125.00 plus shipping
  24. S

    Need parts for engine build

    I have a nice set of ready to ported 452's. 6 pak type hyd cam, etc ill make you a smokin deal on. Email me at [email protected]. Pm's not working for me thanks gus
  25. S

    Cam selection help

    I have the Perfect cam for you! Check my ad in classifieds Comp solid 250 255 530 540 108 thanks. Gus
  26. S

    B/ RB comp solid cam for sale

    comp cams custom solid flat tappet cam for B/RB for sale. what ive got here folks is a reallly nice custom comp cam that i want to run in my 440 but its going to require adjustable rockers which i dont have yet. im really on the fence about going solid or hyd.. ethier way will really get my...
  27. S

    Post your wheel and tire combos.

    heres my 74 dart sport with its new jegs auto drag knock off wheels. 15x4 p205/70/15 15x8 5.5 BS (ford8.8) 27.5x8x15 hoosier emod d40
  28. S

    Roller cam RB for sale

    brand new in the box herbert solid roller cam and lifters CDR253 is the cam number. 290/300 255/265 605 605 108lsa 105 intake center rated 3000-7000. i have the roller lifters to go with it. both are absolutly brand new in the box and havent even been touched. i also have a SA gear 3 bolt...
Back
Top