Search results for query: barracuda rear glass

I still have a lot of rear glass left. Tired of moving I around . Anyone needing a piece they are free ,pick up only. May have a scratch or 2. #1 67 _69 fastback Barracuda #2 3 different Dart hardtop #3 2 67 - 69 notchback Barracuda #4 1 70 -74 Challenger #5 Couple piece's of 67-69...

I am in search for the rear (window) glass (back glass) for my 68 Barracuda. Saskatchewan, Canada....anyone in this forum can assist?

I am looking for replacement rear glass for my 66 Barracuda. Current glass is not tinted so I would prefer to match that clear glass. Located in Southern CA. Looking for something on the West Coast if at all possible, anyone know "a guy" that might have one? Not a huge parts guys, first time...

The passengers side door glass won't go all the way up in the vent window channel. The glass goes all the way up in the rear. I have the FSM and its fuzzy at best on up stop adjustment. Note '69 has an up stop mounted on rear of glass where as '68 has slot with nut in door for up stop...

This is my last set of rear 67-69 Dart Barracuda clear convertible quarter glass. It's driver quality with some light scratches. Nice original pieces. Asking 100.00 shipped. Can also deliver to Spring Carlisle in April. Thanks Sold as is.

I'll be forming a rear glass out of plexiglass for a low weight '65 Barracuda. If all the same, then I might be able to offer them for sale. THX

I'm looking for a driver's side rear quarter glass for a convertible. 67 thru 69 Dart or Barracuda Prefer factory tint with factory AC sticker Part number 2604363 (same 67 thru 69) (pass side for reference) From the internet (this one is clear and casting number is a bit off of the...

When purchased, my '65 Barracuda FS did not have a plastic molding over the center rear support member for the rear glass. It only had the plastic covers in the bottom corners (see picture). I have been under the belief that there was no plastic cover for the center piece, instead the center...

Precision DB3329 gasket for back glass on 64-66 Barracuda. I bought it for a car I decided not to do so it has not been removed from the package. $75.00 plus actual shipping.

This is accurate! Hand tighten the adjustment bolts so that they are tight but moveable. Then use slight movements to adjust into place. This will work but takes a few movements to get right. I hope you didn't remove the rear glass LOL !! You think this one is hard to adjust, wait until...

@Super-Cuda, @Kendog 170 and @mvh are right. You should remove the interior trim. I have replaced 67-69 Barracuda Fastback rear glass before, and it is not difficult. Although you may be able to remove and replace the rear glass without pulling the interior trim, removing the trim is not at all...

I have not started the interior install on ours yet... Check out: 1969 Plymouth Barracuda Restoration Angel Garrido's 69 Barracuda Restoration His documentation has been very helpful with a lot of my 69 Barracuda project! He has posted some excellent videos on YouTube also. Interior Trim...

1965 Barracuda for sale. Started restoration process and decided to change directions. I have replaced the floor pans in the front. I have all the parts, chrome, glass, side windows and rear, (except for the front window), interior that were removed. Has a 273 2bbl not running, automatic...

Tone, just saw this thread for the first time, will be following this. I have been through a lot of what you're doing now, have probably forgotten most of it. Your last photo of the rear of the car with the back glass out reminded me of the two tiny cracks in the quarter panel metal at the...

I took regulator out of spare door and confirmed the only up stop is that plastic cylinder on rear of glass. Thats the only up stop there is. Took regulator out of door on car and no affect on vent to glass up stop alignment. Someone on '67-'69 Barracuda group on facebook told me to tilt...

Thanks for the help and ideas everyone. I have an appointment Wednesday at Apple to pull the glass and try to fix it. The glass is fine and I intend to reuse. The seal around the window was recently installed new by the previous owner after the new quarters were installed and car was painted...

I'll assume that you're asking about front bench seats. They will fit, but they are different. The 4 dr. front bench is not hinged and does not fold forward, eliminating back seat access when installed in a 2 dr. The 4 dr. rear seat bottom is more rounded off on the front corners, and the 2...

You mean list it properly like Nigel does at National Moparts... https://nationalmoparts.com/wp-content/uploads/2022/05/67_76_A__66_70_B_50c8e2265c1e0.jpg new reproduction glass channel weatherstripping. U-shaped channel that fits front edge of door glass and also fits front edge of pop-out...

Hello, First time posting. Hope this is how it's done. Recently purchased another members 67 FB. Rear window leaks. Has a new seal. 68 style I believe? ( just looking again and looks like there is a locking strip so may e its a 67 style? Posted a picture) and it has new 68 clips and SS trim. I...

I could be mistaken but thought all those 64-6 Barracuda rear glass was tinted since they let so much sunlight in. The 3 that I had (and gave away) were all tinted

OK real dumb question.. Can the rear glass on a fastback be reinstalled 100% from the top side? this car has massive tubs and a monkey bar cage in it with a X brace. I am debating on going with Lexan and using rivet's part for that race car look. and part because I am fretting installing that...

Hello, I have read thru the posts here, utube and the how to section has a nice article Quarter window Regulator installation. Also found this write up. Side Glass, Regulators, and Window Alignment In the how to section the glass has been removed from window mount. The motor trend article...

After much internal deliberation, I've decided to pass this along to a better home. 1968 Barracuda Formula S 383/4 spd car. Has rust and will need rear frame rails and front floors plus other smaller rust repairs. good trunk floor, good hood and doors. Comes with 2 new AMD quarter panels. No...

Huge thanks to everyone in this thread, I will reach out to several of you individually to chat. With regards to the tinting, there is a very good chance that what I understood to be not tinted might actually be tinted. The glass itself has a slight green tint to it, not the traditional "dark"...

I have for sale this Barracuda which runs and drives, with a little bit of love could be a really good driver. no title as my state won’t issue but for serious buyers can get current registration. All the glass except the windshield is in great shape, most of the trim seems to be there the rear...

Thanks - I'll definitely check that area. No issues on the surface, but I haven't stripped it back yet. The body seams are pretty wild - I had to cut out a small piece in the roofline by removing the lead, cutting out the rusted seam, and replacing with fresh metal and weld, rather than lead.

Hey Guys, gals, I'm about to pull my rear glass on my 67 fastback. Having it done by a professional. When I get it out and clean will these clip screws self tap or will I have to predrill holes? Any advise on this would be great. Also. I read that the headliner on a 67 Barracuda requires the...

Do not need the glass just the complete regulator

Looking for best quality reproduction Vertical Quarter Glass to Door Glass Seals for 69 Barracuda Fastback. Goes in the rear channel of the Stainless trim attached to the door glass. Originals are fuzzy rubber. Believe they are the same for other models and years. I just don't know who sells...

Same here. According to the FPM only one window listed for the Barracuda, part number is 2484 573 tinted. PS: I do have one here in Florida