Search results for query: *

  1. 72SwingerJosh

    Chrysler Pacifica reliability?

    I bought my wife a 2017 Pacifica new and haven’t had any real issues with it. The oil housing on the top of engine started leaking at 130,000 miles and wasn’t an expensive fix cost about $300 to have it replaced. It’s the part with the oil cap is molded into. It gets old and cracks. Common...
  2. 72SwingerJosh

    Started on the 72 swinger

    I had to get a new bezel for my cluster because my original one got cracked. I found a decent used one from another member on this site for $50. I painted it today after work. It’s a little bit of a pain because you have to mask off a couple times for all the colors. It came out ok but I have a...
  3. 72SwingerJosh

    Classic Air Glove Box Fix

    My Dart is a 1972 so I had to get some screw clips from harbor freight so I could screw the later model glove box into the car.
  4. 72SwingerJosh

    Classic Air Glove Box Fix

    Here are some pictures of the finished glove box and some of the material I used.
  5. 72SwingerJosh

    Classic Air Glove Box Fix

    I am putting Classic Auto Air in my dart swinger and the glove box they give you doesn’t fit at all. I saw other people modify cardboard ones to fit but I like the idea of a plastic one. So I went and found a used plastic oem one and cut off the first few inches of it and then I cut the...
  6. 72SwingerJosh

    Started on the 72 swinger

    Here are the rest of the glove box pictures.
  7. 72SwingerJosh

    Started on the 72 swinger

    I made a new glove box for the dart. The one that classic air gives you is garbage. It doesn’t fit at all. I bought a used plastic glove box and cut the first few inches off and then I cut the junk one from classic air and I screwed them together and dry fitted it and made sure it would fit...
  8. 72SwingerJosh

    [Found!] Plastic Glove Box Liner

    Found one on eBay for $20. Thanks everyone.
  9. 72SwingerJosh

    Started on the 72 swinger

    Here my new panel next to my original one. The legendary panels are nice but I had to make a spot for a clip they didn’t have punched out.
  10. 72SwingerJosh

    Started on the 72 swinger

    I cut out my new door panels and finished my A/C drain. ClassicAutoAir is supposed to supply a 90 degree but they don’t so I picked up one at Lowes along with some more drain tube so I could route it nicely. I also bought a rubber grommet for the hole and a strap for the drain hose. I think it...
  11. 72SwingerJosh

    [Found!] Plastic Glove Box Liner

    My cars a 72 so 72 and up I can make work
  12. 72SwingerJosh

    [Found!] Plastic Glove Box Liner

    They are different. Thanks though
  13. 72SwingerJosh

    [Found!] Plastic Glove Box Liner

    how much would you need shipped to Girard PA 16417 thanks
  14. 72SwingerJosh

    [Found!] Plastic Glove Box Liner

    I’m looking for a plastic glove box liner with the hole for the glove box light for a dodge abody. If anyone has one for sale let me know. Thanks.
  15. 72SwingerJosh

    [FOR SALE] AM Radio

    $45 shipped to the lower 48
  16. 72SwingerJosh

    [WANTED] 1972-1973 Reverse Light

    I'm still looking for a nos passenger side painted reverse light lens part number 3621676 if anyone has one let me know. Thanks.
  17. 72SwingerJosh

    Started on the 72 swinger

    Thanks the Classic Auto Air directions are horrible and you definitely don’t want to use your cars factory accessory circuits. You would melt your harness for sure with that much amp draw. I’m hoping to get a bunch more work done this weekend.
  18. 72SwingerJosh

    Started on the 72 swinger

    I got some work done on the Dart today after work. I installed the Darts dash and the new A/C unit and it’s controls. The A/C is a retrofit unit from Classic Auto Air that you modify your existing controls and it looks factory installed. The factory control arm cables are removed and you install...
  19. 72SwingerJosh

    [FOR SALE] AM Radio

    I have a AM Radio out of my 1972 dodge dart swinger. I have an am/fm I’m using so figured I would sell my AM one. Would be great for a conversion it’s not all beat up. I would like $50 shipped for it in any of the lower 48 states. I take PayPal. You can use friends and family to avoid fees or...
  20. 72SwingerJosh

    Scammers replying to parts wanted threads?

    The funny thing is I was looking for bezels and had just seen that old post about 5 minutes before he texted me the picture of it.
  21. 72SwingerJosh

    Scammers replying to parts wanted threads?

    I had a parts wanted ad up and I had someone PM me and I gave them my cell phone number to send me a picture of their bezel they said they had for sale. I had deleted their PM so I don’t no what name they go by on the forum but here is a snap shot of their texts to me with their phone number so...
  22. 72SwingerJosh

    [Found!] Instrument Cluster Bezel

    I found a bezel, thanks to all who replied.
  23. 72SwingerJosh

    [Found!] Instrument Cluster Bezel

    I'm looking for a 1972 and up style dart instrument cluster bezel that is in good shape with no cracks. If anyone has one for sale please let me know. Thanks.
  24. 72SwingerJosh

    [SOLD] 1975 dart swinger part out

    Is the instrument cluster bezel in good shape? I'm looking for one with no cracks.
  25. 72SwingerJosh

    Power Brakes Booster

    70-76 MOPAR A BODY POWER BRAKE BOOSTER MOUNT BRACKETS OEM COMPLETE SET | eBay this is the brackets you need and I got a rebuilt booster and master cylinder off of rock auto you could put a parts wanted ad for the brackets that’s what I did and got them from another member.
  26. 72SwingerJosh

    3 speed wiper motor restoratIon

    I figured I would post this for anyone looking to get their 3 speed wiper motor restored. I sent mine to Davis Bass. He uses eBay to sell his wiper restorations. His work looks good and he was fast. He had mine done in a week. He also was the best price I could find. Here is a picture of my...
  27. 72SwingerJosh

    Started on the 72 swinger

    I got my wiper motor back today. I sent it out to a guy on eBay who does wiper motor restorations. His work looks pretty good and he was the best price I found at about $300 including the shipping. He had it done in a week which is pretty fast. I need to get the rubber grommets and a connector...
  28. 72SwingerJosh

    Looking for correct vinyl dye colors

    I used Herbs and they came out perfect.
  29. 72SwingerJosh

    Rear package tray

    eBay has them
Back
Top