Search results for query: *

I would say any older one that has a solid lift cam . But get a head without the spark plug cups they had hardened seats . Also have the head done at a machine shop. The head and valve adjustment are the most critical for performance. Raise the compression with cutting the head. I had a 62 's...

IMO, the 79 Super Six is the best to build. Cast crank engine, but still solid lifters. The cast crank will take whatever you can throw at it and is much lighter than the forged crank. That'd be my choice. In fact, I'm lookin for one. lol

Even with the utterly lost, to whom life and death are equally jests, there are matters of which no jest can be made.

All factory slant six pistons will be the same CR. There are some different aftermarket piston configurations within the "stock" description. Some have a slightly lower compression distance. There are also aftermarket "export" low compression pistons. Be careful you don't get these. For what you...

I did a bit more research... The zerk in the DMT kit is a 1/4 -28 tapered thread The socket needed is 9/32 (7mm fits well) I updated my 1st post When I do the second post I'll get some photos and dona proper how to.

4/27 is 427 Day! This 2,070hp four-wheel-drive projectile is actually faster then a speeding bullet! The Challenger II streamliner was the brainchild of the hyper-prolific and ingenious Mickey Thompson in collaboration with Ford's small volume fabricator Kar Kraft. Built in only five months...

I’m looking to put a BBD carb setup on my ‘65 Dart w/ a slant 6. I need a floor mounted, cable actuated pedal assembly including the piece w/ the lever that the pedal pushes against. Thanks!

Tom

Tom

And I thought the Pontiac Aztec's were butt ugly!

Tom

Steering wheel for 72 duster (black) Pretty nice no cracks $100

I’m looking for an inspection cover for an a518 (presumably the same as a 727) transmission with a small block. Preferably one that will clean up nicely without a ton of work. I’m also missing the bracket that goes from the block to the bellhousing. I’m willing to drive up to an hour from...

I saw one recently on one of our local back roads. Ugly as sin - I wouldn't have one if you gave it to me.

I was talking about the cam.

:lol:

I put some new Dart seats in a 67 cuda , they fit pretty good also. Had to work some magic on the rears though.

So I sent a request to the State of California for a title search. I have no idea how far they go back, but it'll be $5 per record. We'll see what pops up. I'm also sending the State of Nevada a request as well.. This will also be the first weekend for a swap meet in Fowlerville, MI. I've...

Tired yet?

And more