Search results for query: 70 dart rear tire size

Additional note: When searching the tire size, include results for '67+ Dart (not Dart Sport). Same rear wheel wells and fender openings as a Scamp. You should be able to go 225 70 in the rear (235 may physically fit, but you're going to run into issues with speedometer calibrations); but I...

I should have said with 225/70/14 with drums and sbp rallies they rubbed a little on the front. Went to the lbp rallies with the disc brake conversion and they rubbed more. That conversion pushes the wheels out a little. Then the tire size change to 225/60/14 solved the problem.

In the front you'll want to check the rim to UCA clearance at full steering lock and suspension extension, and then the tire clearance at full lock on the frame. You may need a small spacer, it will depend on what UCA's you've got and how tall your front tires are going to be. And how tall the...

I think the magnums look great on your car, and I would keep it to a 205 tire on the front. The 225/70 rear should be fine, I ran them for a couple years on my 70 Dart without issues. Just my opinion.

The backspacing is pretty important, with a little extra backspacing you can get taller than 26”. And it’s also a height/width thing, the wider the tires are the less height you get. So some of the drag racers run quite a bit taller than 26”, but they’re super narrow tires that sit in from the...

What is biggest tire that fits ? 1972 dart stock quarter panel . Has old Mopar leaf spring in boarding kit ( belice those shackles moves them in 3/4” . i have 15 x 8 4.5 back space small bolt pattern rallies . I have 255/60/15 mt on now . Looks like I can go way bigger . I’d like to put...

They're 18x9's +35 with 275/35/18's on the front and 18x10's +38 with 295/40/18's in the back. It also has Dr.Diff 13" brakes in the front which widen the track a bit, as well as a 68-70 B-body 8 3/4 in the back with 1/2" offset springs. Fenders are rolled and pushed, rear quarters have a...

I just ordered to steely 15X7 with 4”bs for the rear of my 1970 dart swinger. It still has the 7.25 rear ended with XHD leafs springs. Will 255/60r15 work without moving the leafs? Or should I play it safe with some 245/60r15s

I'm sure you have all experienced the problems with getting the rear wheel off on '67 and later Darts. I currently have 225/60/14 mounted on stock 14" rally wheels, and they are a little bit of a challenge to get off the axle. I have to get the body of the car up, and hang the axle down...

Hi, Thanks in advance!! Eric 1973 Dodge Dart Sport 340 with stock brakes and suspension Current setup: 14" Rallye wheels with Cooper Tires Front tires 215/70 R14 Rear tires 235/60 R14 New ESPO stock XHD height 6 leaf springs to be installed at the same time. Will Cragar SS fit? Cragar...

Nice looking Dart. Do you run this size on all 4 corners? What size wheels are you running? I am dreading picking which tires to buy because I know jack-shizz about tires. I need to make a decision in the next few weeks and its giving me anxiety. I have Wheel Vintiques Ralleys in 14" x 6" (4"...

I used the SSBC 153 disc brake kit on my '71 Dart and am now looking for advice on what size/backspace using 14" SBP and Cragar SS wheels and BFG tires, 70's front and 60's rear. Thanks, Dave W.

Chk this site out 215/60-R15 vs 245/70-R15 Tire Comparison - Tire Size Calculator | Tacoma World

Looks nice, what size wheel/backspace and tire on the rear? Also, what do you mean you lost your car due to wheels being to big?

The front wheel wells are the same at the chassis on all A-bodies. The only differences come from the fender shape and the shape/size of the wheel opening on that fender. Barracuda’s are the most restrictive for front tire height, the lower front corner of the wheel opening protrudes more and...

Wow 72bluNblue, as always you are a Sage of a-body knowledge. Thank you for sharing, that helps clarify things quite a bit!

Contact Moser Engineering, They have the proper hub size and offset for the brakes on there axles. When I bought my Moser axles for the 70 A body 8 3/4 housing with 10 inch drum brakes that was in my 66 Dart, Moser new exactly what I needed and even offered to drill both bolt patterns in them at...

What is the "performance cam?" What rear gear? What rear tire size? Be honest do you keep your "foot out of it?" And what kind of driving we talking about, suburban fair number of stops/ lights, or highway, or what, and what cruise speed? What does the tach turn for XX mph, say 55...

Try looking thru these posts. =67"]Search Results for Query: 70 dart rear tire size | For A Bodies Only Mopar Forum

Can someone tell me how big I can go on rear tire size. Running 17" rims on stock suspension, 71 dodge dart swinger

700-750 ought to do it. If you could lose a couple of hundred pounds that would help a lot. Rear end gearing and tire size should get you to where you want to be, provided you can rev that motor high enough. 6.35 8th mile and 10.0 quarter.

Jumpin' Jehoshaphat ! If it's a stock slant 6 and at 14.7, I'd be look'n into that before I even thought of leaving. Ouch to that!! Even at 70 mph, I'd think 20 + would be more than reasonable to get. We got 17 mpg with a '70 dodge truck with a 340 and mild cam at 65 mph on a 2000 mile...

Dusters/Demons/Dart Sports can actually fit wider tires in the rear, the wheelhouses are actually bigger. Equal diameters is a personal preference, and honestly most people prefer to have taller tires in the rear. Just look at any of the wheel and tire threads, most run a staggered set up with...

You might as well get used to the idea of moving the springs AND narrowing the rear end, lol. Try this; Remove a wheel, support the axle at ride height. Measure from the inner edge of the outter lip to the back wall ..... where the sidewalls will be. You will probably have to drop plumblines to...

Just to add.When I bought my 65 Barracuda it had the B body front suspension and a Ford 9 inch in the rear. It had a 383 and 727 too. Replaced the Ford 9 inch with a 7.25 LBP 3.23 Sure Grip from a 1974 Dart Swinger 318 904 car. I was bucks down and needed to drive my Barracuda for work. The...

Nope. Just a 1/2" spring offset like the OP is planning Barracuda is a completely different animal than a Dart. About an extra 1" to the quarters compared to a Dart. What will fit a Barracuda, Duster/Demon/Dart Sport is completely different than what will fit on a Dart. Same for the SS spring...

Do you have 2 of the 68-72 arm rests? What size are the slots? Tha ks.

There are far more Dusters/Demons/Dart Sports with 275's mounted on them successfully than cars that they didn't work on. The OP's car will most likely be just fine with a 1/4 spacer and nothing else. I'm well aware of problems in ordering rims, I've maxed out the rim and tire widths on pretty...

i purchased a set of powder coated mopar 15x7 steelies. I have a 70 dart with a 8 3/4 what size tire can I fit on front and rear?

Thanks for the reply, I will try and gather more info . It is mini tubbed in the rear. I am actually in the process of purchasing this car, it currently has 19x8 on the front and 20x 10 on the rear. not sure of any offsets or back spacing. was wanting to remove that wheel combo and step down to...