Search results for query: *

Hey thanks guys... The one on the pinion shaft is facing against the surface of the pinion gear so I can't read the part number... But this is exactly what I needed so thanks guys I just ordered one it'll be here tomorrow morning

If you put the same cover back on the box, this should not be a problem.

"Salma" turned 59 years old today! Built 4/29/1965 in Hamtramck. Hopefully I'll have all the bodywork done by the time she turns 60... I'm still chasing an ATF leak. It's still at that spot where the pan has a little cut out for the park lock housing. I think that modern gasket is not made...

What size are the tubes? Tom

as for bolt-ons with an 8/1 318 1) a compression test. You gotta have all eight working. 2) a higher stall, and a tune up 3) rear gears 4) a 4bbl/a free-flowing exhaust system, and more tuning. But if it was me The first thing I would do is crank the Pressure up. Maybe then I don't need all...

Just say NO to Holley

I your other thread about this, I explained it this way, Say you got to push your car into the garage, the force applied to the car is basically torque and the foot steps you take are basically rpm, it takes both to move the car you can push on it all day long but until you take a step a your...

I think those clips require a thin rectangular slotted hole.

PM Sent

I bought a bunch of 489 chunks 10 years ago for $100 a pop, as a reference to what people have invested in them. ☆☆☆☆☆

I believe it 100% it's a good car, Bill is good driver

I am thinking flow numbers off the top of my head. I'm sure the cnc Speedmasters wouldn't come close to the TF's and the cnc TF's probably flow less than a untouched W2. I don't know the numbers. Just guessing.

Well my wiring kit arrived. I'm on my phone now waiting for someone. I will try to post a picture later.

Hp is what moves your car and hp is made from torque and rpm, in a street car rpm is somewhat fixed, peak hp tends to be in the 4500-5500 rpm range give or take so there's a little wiggle room for rpm but torque can very from like 150-700+ lbs-ft so torque will generally have more effect in a...

Mmmm since the TrickFlow heads are ported we gotta compare them to ported W2 heads. And that’s no comparison as the W2 heads would kick the TrickFlow heads butt.

I might add that a larger screw might do the job for the forward hole but rear hole might be too big for this to work.

They should work in any 833 even the aluminum OD version but someone mentioned something about having to make sure about the reverse gear meshing correctly. I would mention it to Jamie when you call.

...

Was she good

This is a OEM Mopar Small Block Distributor Hold down W/Bolt. It came off of a 340, but should work on most any Mopar small block. It is original, not a china knockoff. $15.00. Local pickup, or buyer pays shipping.

Yup, I get it however I picked up 2/10's just from upping my launch RPM from 3000 to 3600. I'm going to try 4000 next time out. Plus it should pick up at least a tenth just going to my home track so that with removing the exhaust and air cleaner, getting the tune right with the right converter...

Things to check...... Throttle body Waste Gate Boost Gauge Blow-off Valve Condition of inter-cooler ....and......Down-pipe capacity :lol:

amen, but for Dan, a 2800 would be fine.

:popcorn: I'm just gonna watch for now.

Let's see, Unported Speedmasters out of the box to CNC Ported Trick Flows. The Speedmasters are 1 small step better than OOTB Edelbrock's and ported Trick flows are a step away from W2's. They better give you 50 horsepower on an engine like that.

Don garlits loved this track back in the good ol days

Lol

.30 starts getting pretty hard at that ET. But I’m sure you’ll find it.

Probably uncle Charlie, or Uncle Bill, or Uncle Joe or whatever that guys name is.

Need suggestions vs enlarged holes in door panel sheet metal which won’t hold the arm rest. I ordered the clips in the picture but, with panel removed, I don’t see any way to keep clips in place on the back side of the metal. Back side of door’s sheet metal is very difficult to reach. Would...