Search results for query: *

I have a 1966 dart GT it needs to be reassembly a lot of money has been spent this was a original yy1 bronze poly car original 273 charger motor and original transmission intact and both are rebuilt I have all the Original top end but the car has a set of Mildly worked 302 swirl ports and a...

Like it says looking for a dart convertible in California Northern California would be best but anywhere is cool I have cash but also have a 2013 charger pursuit special that I’m interested in trading if there’s any interest or if you have a Dart for sale please contact Rob

I need 1 pushrod ball n cup 7.5 long for a 66 solid lifter cam 273 and 1 valve adjustment bolt with ball end if you have a old incomplete set would be best I’m not looking for a whole set up just trying to fix the problem created by Oregon cams selling me the wrong pushrods and then not taking...

2013 charger pursuit really nice charger I picked up in a trade was going to give it to my kid but it’s just to dam fast looking for a early A body convertible dart 64 65 or prefer 66 or other A body cars the charger has no problems or damage runs great handles like a dream all hp chips n tuning...

66 dart just a good body floors are shot great trunk pan fenders and hood n trunk lid in good shape and there dash has a ok pad but no gages heater box n stuff is there will part but would like to sell it whole I’m asking 400 obo as is can be picked up in far NorCal 96025 all glass but rear...

Complete 66 dart post car body willing to part floors are shot but good trunk pan fenders and doors are straight and not rusted all glass there but the rear window the dash is there with a fair pad but no wiring or gages I live in far NorCal 96025 I’ll sell it whole for 400 obo need it gone...

running driving dart 270 /6 904 rebuilt motor and trans with about 18k on them good body with the usual rust in pans will need floors at some point but there and in drivable condition everything works on it no big problems the interior is in need of help but there ...this is your standard 2k...

looking for a 63/4/5/6 dart prefer a gt but hey beggars can be to picky ...car must run or at least start no rust buckets or cars that are made of gold ( priced out of there minds ) looking for a car to fix n drive ..I'm well aware of mopar rust I'm not worried about the floors as much as the...

One set of 66 only rocker trim for a barracuda in great shape not show quality but nice not all banged up or rotted ..I can't figure out how to put pics up but can message them 200$ obo and shipping from 96025 only trades I need are rally caps and radio face plate for a 66 valiant thanks

I need a set of early A body motor mounts and brackets for a reasonable price ..I really only need one but will buy a pair thanks

ok so I have a 8 3/4 pumpkin with 323s and clutch sure grip in a 489 case in excellent condition I have a Cut down B body housing to A body that you can have with it for free no brake hardware or axels was going to put it in my valiant but bought a whole rear with 355s so it can be picked up in...

1965 barracuda rear seat Crome trim with grab bar and grab bar ends very nice not beat to crap great Crome no rust 200$ or best offer looking for two 14 or 15" x6 or 7 slotted mags Bb for a 73 duster

1 pair early A body buckets Bare fraims in excellent condition no rust or rot solid one bottom has one broken spring have the rails and floor mounts all Crome everything were in my 65 barracuda ..350$ ..pick up in northern cal or shipping is extra from 96025 P.s. There's no foam on them as well

like it says 1966 barracuda rocker trim in really nice shape not show but better then driver 200$ And shipping or part trade for 65 commando badge drivers side only or are they the same ??? Only need one ..thanks

looking for a pair of big bolt 5 slot mags for the front near nor cal

I have a 489 8 3/4 sure grip 323 geared rear housing and center section no brakes or axels for a A body ...looking for a 65 barracuda grille center section will do partial trade or buy it out right not looking for new just driver quality thanks

I'm looking for the center section for a 65 barracuda I don't care what it looks like as long as it's solid and all there if you got one send me a pic at (Email removed by staff) ...if you have a useable driver quality one I'm ready to buy if you have one made out of gold for a show car keep it...

ok ...here goes ...my 66 valiant had a 360 backed by a A904 ran fine but got **** mileage so I replaced the 360 with a 318 I bought a new converter for the trans and installed them both now here's the fun part the motor runs great but the trans will not go into any gear or do anything ..and...

66 valiant convertible signet v8 car none original motor out of a mystery 79 doner car says the intake running good drives and stop good too will need a total restore no rust in floors front or rear there solid original cal car interior is all there buckets and consol will need to be recovered...

Hey I have a 2007 gsx1300r..hayabusa ..the bike is flawless never down none salvage title with 20k miles has a few upgrades and extras I took the bike in on a trade and have found that it's just to dam fast for my taste looking to trade for a Dodge Dart 67 to 69 or Plymouth barracuda any year...

Need a pair of kick panels for a valiant any color must be in useable condition but minor blemish ok

Trying to convert to power steering ..car has a 360 in it what pump should I use and I'm looking for said pump with the brackets and I also need a return valve

Looking for a set of headers for my 67 barracuda slant six car if you have or know of some send me a message Thanks bob

Looking for valiant convertible side panels the ones that cover the Rams would also look at a set of door panles if you got them thanks

Looking for a compleat a body floor shift linkage setup rods, brackets, and mounting hard wear also looking for mounting brackets for the console I have the shifter and uper rod ...any help would be greatly welcom

Hi I need the mounting brackets to mount a floor shifter and coffin console for a 1966 valiant possible the linkegage too

Ok I know this is going to sound dumb but this is my first convertable ...why does the back window have a zipper at the top ...is it for replacement only or do you unzip it to open it ..I'm confused

Very nice 66 convertible tons of new stuff fresh paint and about 14k in recipt ..what ya got to trade

Looking for a rebuilt 273 long or short block thanks

Full set nice condition looking for a aluminum intake for a 360 or 100$ I was told they came off a charger but don't know