Search results for query: *

THANKS. Trick Flow Powerpoint 190s? will current headers and intake bolt up to them?

I have been thinking about getting some performance heads for a while. Maybe I should have bought some Edelbrock heads before the quality went downhill. I understand that since the company was sold, quality control has left the building. I have a few questions: 1. Where are Edelbrock heads made...

You missed a spot. Ha Ha. Seriously, It looks really good. That is an amazing idea. A few years ago, I had a big problem with sealing the housing to a new Eddy Air Gap. I tried several gaskets with several types of sealant, and I tried filing the surfaces to flatten them. I finally bought a...

It is. I always thought it would be easier if the relief was in the manifold. I always put a few small dabs of gasket sealer in the relief of the housing and then put the thermostat in the housing and give the sealant a few minutes to set up. Then install the gasket and place the housing on the...

100% agree. Ask me how I know! LOL.

You do make a good point. It would be interesting to know what the tooling cost was and what it costs to stamp and produce every one of those 69 rear decklid panels. 69 was the lowest production year of the 67-69 Barracudas, so it is a rather limited market to start with. I wonder how many of...

If I was doing an accurate restoration, I would GLADLY pay $300 for a part that is otherwise unobtainable. Sometimes people really crack me up. They ***** and complain because certain parts are not being repopped. Then, when a company drops a fortune on making the part, and charges an...

That means tomorrow is giddyup giddyup 409 day, and it is only 18 days until Hemi day.

If anybody thinks they are "Rare", I'll be happy to sell mine for a mere $10,000.

Third on the 100%!!!!!

Only 39 days till Hemi Day

It truly is JUNK. There are plenty of 340 manifolds out there. I sold a very nice one about 2 years ago the third time I listed it for, I think, $125. The first two times I listed it I started heard nothing. FWIW, Take the loss and move on. It's like this. If you had a 69 Roadrunner with the...

I'm pretty sure it doesn't. I do a lot of powder coating. I have gotten pretty good at coating badly pitted and damaged metal. I do whatever I can to repair the metal (weld, sand and hammer and dolly), and then use JB Weld like filler. It fills in pits and other flaws, sands smooth like filler...

I see what you are saying, but how many of us have ever said, "Wow, why would he want to stuff a 426 Hemi in his 67 Barracuda?" or "Nah, I don't want any more HP because I am not going to race my car". :rofl: :rofl: :rofl: Seriously though, I think you can put in whatever kind of an engine...

I have a 69 Barracuda with a 340, 4 Speed and a 3.55 Sure Grip and headers. About 12 years ago, I added an Edelbrock Air Gap, 750 CFM carb and a Comp XE268 cam kit (cam, lifters springs). It is an awesome cam. It sounds great and has lots of power. I can melt the rear tires. This combo is good...

I have heard of 2.05 Intake valves for SBM heads, but never 2.08. Do they even fit?

I also have the XE268. It is awesome. It has a nice lope to it, and it really gives the HP. The sound from the exhaust is so sweet, I haven't noticed any valvetrain noise. I have 2.25 exhaust system with two low restriction turbo mufflers. It sounds sweet!

@Bodyperson The gears were, and still are, 3.55. With your setup, I am guessing you will be at about 375 HP, maybe more. Do you think 600 CFM is enough carb. It will be great for driving around town and doing burnouts, but I think you are giving up at least 20-25 HP by not going with a 750. I...

You should like it. It is similar to the Comp XE268 I have in my 340, and I love it. I don't think a stock converter is going to work well for you. I converted to a 4 speed many years ago. While my car was still an automatic, I can tell you that the 727 with a stock converter would kind of...

Clear works fine on an engine. Duplicolor and VHT both make high temp clear engine paint. I'm sure that other companies do also. I have used the Duplicolor clear with ceramic (over Duplicolor engine paint, of course), and it worked fine.

That CW vs CCW rotor movement can really keep an engine from running. Ask me how I know!

Fuel tank could be filled with enough rust and crud that the filter sock on the pickup in the tank is clogged. Try taking the fuel line from the tank off and blowing air into it (mouth or compressed air at a low setting) while an assistant takes the gas cap off and listens at the gas cap hole...

Plus, if you buy them from Summit and they don't fit, Summit will take care of the return. That is what happened to me 30 years ago. I bought a pair of Headers from Summit (I really do not remember the brand for sure; might have been Hookers) and they absolutely did not fit. I think the flange...

No, but I just went to Hedman's website and looked up headers for a 69 Barracuda with 340, PS, and 4 speed, and uncoated and part # 70850 came up.

I want to say two things. 1. Many years ago, Hot Rod magazine did an article where a three engines were built with a strict budget ($2500 I think). There was a Mopar 318, a 350 Chevy and a 351 Windsor (as I remember). The 318 wound up winning. 2. If a person does not mind having a few tubes...

You took the words right out of my mouth. If the builder cut corners on something that can be seen so easily, where else did he cut corners?????

To answer your question, I used to use a product called 5 Minute Motor Flush. I don't know what it was, but it was a clear liquid, and it apparently thinned the oil down. You put the entire quart in and idled the engine for 5 minutes; then drained the oil. It was supposed to clean out all crud...

I won't argue that, but that was not what I meant. I guess I might not have said it very clearly though. What I meant was that if you built a 318 up to where it was 1.5 HP per CI you'd have 477 HP. If you built a 360 up to yield 1.5 HP per CI you'd have 540 HP. A difference of 63 HP. 1.5 HP per...

I would go with a 360. There is no replacement for displacement. But that is me. You may not care about the extra 42 cubic inches between a 318 and a 360, and 42 more cubic inches will be about 63 HP at about 1.5 HP per CI. If you don't care about the extra CI, then go with the 318. I think it...

AGREE AGREE AGREE AGREE I want you to think carefully about what THEY said and what I am about to say. I used M&H harnesses when I restored my 69 Barracuda. They were incredible. Perfect fit; colors/stripes matched factory harness exactly; all connecters were perfect. Easy peasy lemon...