Search results for query: *

If anyone has set one of these up before(mines going on the slant 6 turbo), I can use all the help I can get. The MSD instructions are very short 'n' sweet in some areas. Such as: it says you must "lock out" the distributor but doesn't say how to do it at all. I've read some posts on other sites...

So i bought a mini starter(categorized under 90 Ramcharger) for my slant 6 turbo build and am having some issues. The starter hooks up just fine. But when I turn the key, the starter makes a rapid clicking. It almost sounds like the teeth on the gears don't line up. Wiring is good and the same...

A lot of hours into making the dash piece. Its not done yet but looks pretty good so far. The switch is for the fan. And the third picture is kinda dark, but you get the idea.

So I'm about 35% into rewiring my demon but have a simple question and a strange problem. The question is: on my wiring instructions it has the middle of the three wores on the Neutral safety switch going to the starting solenoid. But it does not tell you where to run the other two wires. I'm...

So guys; its been awhile since I've posted on here. But I come bearing gifts(or pictures, rather). The header is done!! :cheers: It looks great! Put about 15 hours into the inner fender and firewall in preparation for the engine's return. Took out the stock wiring harness and began installing a...

On my Slant 6 turbo build; what type of regulator/pump setup should i be looking at? Can I run my stock fuel pump and get a regulator with no return and a boost reference(and if so; are these referred to as "non-bypass" regulators)? Or do I have to run a return for such an application? I'm...

Ok...so my 71 demon has 9 in drums in the front. But when I bought the car, the guy also gave me some disk brakes(upper A-arms, spindles, rotors, and calipers) that have a 5x4.5 bolt pattern from an unknown car(but to me it would seem the upper a-arms are the same). I'm looking to put some big...

So I mocked up the carb on the engine today and a potential problem occurred to me. The way the carb sits, the primaries are in front and the secondaries are in back(in relation to the engines cylinders). So I'm wondering if under full boost, the front 2 or 3 cylinders will not get their fair...

So I've been doing some extensive reading about ignition timing of engines running boost, and from what I have read, knock sensors are the way to go. Apparently the MSD ignition boxes that retard the timing "X" amount of degrees per psi of boost can give you a great top end, but a saugy middle...

So its been a little while, but progress has been made. The engine is mocked up in the car, ready for my machinist to come out and look at the clearance(or lack there of) that he'll be working with when he modifies the manifold for the turbo. Engine was built with all the goodies(custom cam...

So I've come to the conclusion that rebuilding my busted 5.7L hemi and resto-modding into my 71 demon is out of my price range. So I'm back at my worn out, ole' six banger. I decided to get the /6 rebuilt but also upgrade it. I found a turbo from a mazda 4 cylinder that will do nicely for this...

I've decided on a transmission finally but I need additional information before I can purchase it. What input shaft do I need? What clutch, throw out bearing? Crossmember?? I know keisler sells a kit with everything, but I'm trying to avoid doing that as it doesnt fit in with the planned budget...

I'm gonna be running a '03 5.7L and want to put the 6 speed out of a 09 challenger behind it. I'm gonna be running a carburetor setup on the hemi; so what do I need (electrically speaking) to use the T6060(I think is what its called)?

I'll make a long story short and get straight to the point. I freshened up a 225(originally 1bbl) with a 2bbl intake, and a 2bbl Street Demon carb. I can get the engine to start with the choke on, but it seems to be too much carb for the 6er. So what are my options guy? One guy at my shop told...

I need the kickdown linkage for a slant 6 with a 2 barrel carb(super six). If you have the throttle linkage, I might need that as well. Also, if anyone has ONE "red circle" dog dish hubcap; I need one of those as well. Hammer :snakeman:

I just bought a iron super six intake for my slant 6(in a 71 Demon) and am looking for goodies to go with it. I wanted an electric choke, so the marine 2-barrels caught my eye. So my quicky is this: Is there anything that makes putting a 500 cfm marine carb on my 225 a bad idea? I was under the...

Hello everyone! Had a girlfriend a few years back who had a 68 Dart conv. and always loved her car. Always told myself "Man, I want to get my hands on a Mopar!" Almost scored a 71 Demon with a /6 a few years back. But I was about to move so it just wasn't practical(like owning a 40 year...