Search results for query: *

Looking for a correct, complete power brake booster for a 72 Duster. LMK what you got.

When swapping from the original tapered bearings to the green bearings, is it required/good idea to keep the seals in the axle tubes?

Hello, I am looking for a clutch pedal assembly for a 73 duster. Let me know if anyone has one laying around.

Does anyone have a source for stock style head bolts? For a restoration build. I am not looking for ARP, I would like a stock style bolt with 3/4 inch hex head.

Finally started to disassemble the original 340 from my 72 Demon. I got the car back in 1985, I’m sure the engine has never been apart. Block is a early 71 casting date. Even stranger, the bearings are dated 11-69. It’s a forged crank engine, came with 915 J casting heads with 1.88 intake...

Small block Mopar 727 Race Transmission. 2.77 low straight cut gear set, Alto red clutches, Kolene steel plates, 5.0 band apply strut lever, new Turbo Action Trans Brake Valve body & spring kit, Mopar Performance deep pan. CSR SFI safety shield. Frank Lupo Dynamic 8 5000 stall converter. Trans &...

New Wiseco K0011B4 410 stroker dome pistons and JE J71208-405-5 rings. For use with a 340/360 with 4.04 bore and 4” stroke. I paid $800 for the pistons and $250 for the rings. I’d take $700 for both.

Small block stuff. New 410 stroker rotating for 360 block, K1 4340 crank, SCAT H-beams, Wiseco 4.04 dome pistons, JE rings, PowerBond SFI race balancer-$1800. Used Comp solid roller cam & lifters(20-718-9 cam and 829-16 lifters)-$500. New MP 5007399 solid roller lifters-$350. New Indy...

Is anyone running a diaphragm style clutch in their Duster? I read somewhere that you should unhook the over center spring on the clutch pedal to run one, does anyone know for sure?

Looking for a original style power brake booster for a 72 Duster. Let me know if someone has one laying around.

(WANTED) Saginaw power steering pump with pulley for a 72 Duster 340.

What is everyone using for an oil pan to put a 5.7 in a Duster?

l got into a discussion today with a gentleman who has a 72 Demon 340 automatic. He thinks it came with a 904 trans. I was under the impression that all 340’s came with 727 standard equipment. I asked to see his fender tag and it says E55, D34. Any decoding I have found says standard or...

I have ceramic coated TTI headers on my 72 Duster. The coating is coming off. Where is the best place to have them recoated without costing an arm & a leg?

Looking for a power steering pump, mounting brackets, & bolts for my small block Duster. (Lines would be a plus). Let me know what you've got and a price.

I bought this kit a few years ago from John. Never got to finish my project, so I'm selling. I used the uppers on another project, but you can get QA1 uppers for around $300. I also bought new Strange shocks and QA1 springs recommended by John. I paid $900 shipped for the kit, $170 each for...

Anyone familiar with the Mopar P4876796AB Race block. I was going to use a stock 360 block to make a 650+ HP 410 stroker, but have been considering a race block instead. I already have a K1 360 main 4" stroke crank, SCAT H-beams, and Wiseco .040 dome pistons. This seems to be one of the only...

I have 2 sets of SBM solid roller lifters for sale. The first one is a used set of Comp 828-16, nice condition. The second is a set of never ran Hughes Engines HUG-5323 solid rollers. I'm looking for $300 for the Comp's and $275 for the Hughes.

Brand new, never used Indy 1.6 ratio roller rockers. Complete with rockers, shafts, shims, hold downs & studs. Indy part number 360-R4-4. They fit the Indy 360-1 & -2 heads. Looking for $450 shipped.

I have a set of Indy 360-2 heads set up for solid roller(269/276 .698/.698). I've read not to use the Indy rockers with higher spring pressures. Any opinions on the T&D or Harland Sharp rockers? I only want to buy once and not have to worry about it. Customer Service is always a big plus also.

New, never used pair of 3870810 Mopar W2 iron heads, used 1.5 adjustable rockers with aluminum stands, new in box set of 8 P4007941 2.08 intake vavles, new in box set of 8 P5249195 2.02 intake vavles, new in box set of 8 P3614589 1.60 exhaust vavles, new in box set of 16 P2806077 vavle springs...

New in the box Diamond 408 flat top pistons. .030 over(4.030 bore), with pins, part number 51026. $400 shipped to the lower 48. http://www.hughesengines.com/Index/products.php?browse=category&level0=U21hbGwgQmxvY2sgRG9kZ2UgTWFnbnVtICgzLjkvNS4yLzUuOSk=&level1=UGlzdG9ucyAoMzYwIFN0cm9rZXIp&partid=472

New in the box Diamond Flat Top Pistons & Pins. 4.030 bore. Decided to go High compression dome piston. $500 plus shipping...

I'm putting togather a 410ci stroker using a 77 360 block & was curious what kind of HP the block can handle? Is a partial fill of hard block worth doing? Any experiance or thoughts on the matter?

Hello, I have a set of ported Edelbrock Performer RPM Small Block heads with Comp Cams 1.5 Roller Rockers, Comp 943-16 solid roller springs. I bought the heads from Pro-Street Performance Yorkton SK, I don't have flow sheets but told they flowed 285/205. Fresh from machind shop, never ran since...

Holley 950 HP list #80496, fresh kit, billet throttle plate, billet metering blocks, new HP/Dominator bowls, rear jet extentions & float. Fresh never had gas since rebuild! Main body & metering blocks are used, every other part is brand new! $400 + shipping.

I have what started out to be a 4779 Double pumper, with ProForm HP center & Quick Fuel billet metering blocks. The other is a Holley 950 HP list 80496. Both worked great when removed. $350 each plus shipping. Going Dominator! (950 SOLD!!!!!!!!)

TCI Reverse manual valve body. Excellent condition! Worked flawless! Going to trans brake. Paid $225.95 from Summit Racing, will take $125 shipped to lower 48! Fits 727 or 904.

Moroso deep sump 8-qt oil pan for 273-318-340. Looking for $100 plus shipping.

New neutral balance BHJ balancer for 273-318-340 or internal balance 360-408. Looking for $150 shipped to the lower 48. http://www.bhjdynamics.com/index.php?main_page=product_info&cPath=7_60&products_id=117