Search results for query: *

This pair of Cragar Chrome Slots are NOS, they have been mounted on tires, but only rolled about a half mile. We took them off to do something different. They are 14x6, SBP (4"). The original center pieces were missing. I found 2 round plastic centers, short bullet type, that fit and painted...

Merry Christmas to all. Looking for an NOS or like new molded breather hose from the 273 HP air cleaner to left valve cover breather. This appears to be rather limited and was used on the CAP (Calif) motors. The parts manual shows it listed in section 14-29 as CAP, Air Cleaner Conn, part #...

Removed from a 67 Barracuda, should fit other years. As the pictures show these are driver quality parts. All parts are functional, handle(s) chrome is worn but not bad from 10 feet. Armrest bases (2 front, 2 rear) are intact, no big chips or cracks. Can be sanded and painted any color you...

Like new rechromed pair of bumper guards for the front or rear of 67-69 Barracuda bumpers. Chrome is excellent, rubber pads look as good as any I've seen. Mounting bolts included. $60.00 plus shipping or local pickup. Located in DFW area (76028). PM me if interested.

Driver quality 67-69 front or rear bumper - $80.00 plus shipping or local pickup. No dents, little to no rust. Chrome is thin in some areas, looks very good from 10'. Includes bumper bolts and side attachment brackets. This bumper has factory appearing holes for bumper guards. I will be...

’66 Plymouth Barracuda, BH29D62584803, located in Burleson TX 76028. This fish has been in a slow gentle restoration for over 10 years and is 95% complete. Runs, drives, stops and the radio works! Originally it was an AC car, when I got it the compressor, dryer and hoses had been removed –...

Replated, repainted one year only center grill emblem. Looks outstanding. Two of the three mounting posts are broken (will be included). I've been told the posts can be repaired, it's just not in my skill set. Because of the broken posts I will sell it for $25 plus ship (approx $10 using USPS...

This idler arm appears to be a 1965 Valiant/Dart or ? I looked it up in the 1965 Mopar Parts book and the closest visual match I could find was part number 2072577. That being said it is new, unused with no identifying numbers on it. If anybody recognizes it, it's for sale for $10.00 plus...

This is the P5249958 MP aluminum pump for 273,318,340,360 motors. It is not for the 1990's Magnum engines. It is like new- never installed. There is light surface rust on the pump shaft and impeller. A small wire brush would clear that up. It is right or passenger side bottom outlet. Really...

Early ABody Valiant radio complete with intact faceplate and all control knobs. I do not know it's history or the specific year(s) it was made for, the case has Model 222 stamped on it. Exterior is very clean the power wires are complete with original connectors, no splices. Knobs and push...

Rechromed turn signal arm with attachment bolt from a 66 Barracuda, may fit other years and models. Show quality. Located in the DFW area, 76028. $25.00 plus shipping. PM me if interested.

Complete 4 speed brake/clutch pedal bracket unit that came as part of a purchase of a '65 Form S Barracuda. It is in it's original assembled state and is unmodified or blasted/sanded or cleaned. It has the original pedals. If you're looking for original survivor-type parts this is it. If...

Need the right (pax) side tail light housing in excellent condition. Please send price and pix, including shipping, via PM. Shipping will be to 76028, TX. Lens condition, if installed, not critical. I only need the right side but understand you may have both sides and may not want to break it...

Looking for replacement hood letters for my 66 Barracuda. I particularly need the letters "P", "O" and "T" with good chrome and attachment studs. I understand that some of you may have complete set(s) and don't want to break them up. I prefer the individual letters but will discuss options...

I have a free buildable 273 motor complete except for intake. The motor is free and rotates fine, was running when pulled. Includes pan, v/c, pullies, mechanical rocker arms, left ex manifold and distributor. Block casting number is 2806030. It is for pickup only. We are located in Meridian...

Looking for someone who needs a complete 7.25 rear suspension and is willing to pick it up. Originally from my 67 Form S Barracuda, should fit most early/mid A bodies. Differential has new axle and rear housing seals and new gear oil. New brakes with good drums. I believe gearing to be 2.76...

Looking for a source for the original rubber sway bar bushings, on the center of the bar not the end links, for my 67 Form S. I have exhausted all known sources, I think, and have found nothing but polyurethane replacements. The bushings are triangular and can be "squeeze fit" into the mounts...

Would appreciate comment from anyone who has experience with getting the lower control arm paint color OEM correct, or close. For years I have always painted them to match the K Member. It is my understanding they should be a yellow or gold color since they came from the factory bare with some...

Looking for a decent set of '67 Cuda Black front door panels with woodgrain insert. Will consider good black panels without the woodgrain insert. Cheers.

Need 67 Barracuda backup light housings, or whole assembly, in good shape. Thx

Looking for a left (driver side) lower control arm for my 66 Cuda. I believe 64-66 Cuda/Valiant/Dart lower control arms are the same. Do not need control arms with sway bar attachments but will consider if available. Zip code is 76040 (TX).

Need a transmission (904) rear crossmember with or without mount for '66 A body Cuda. Also looking for 14x6 SBP (4") chrome reverse rims and aluminum 273/318 small port 4 bbl manifold (offy/weiand?). Located in DFW Texas area (76040).