Search results for query: *

Set of 4 14" Mopar Rally Wheels for sale Shipping from San Diego, CA Price: $150 Payment Methods Accepted: paypal, money order, Large bolt pattern, 14" original rallys, need to be cleaned up Greyhound would probably be around $100

1972 Dodge Dart Swinger 2 Door Hardtop. Engine was originally a 318 V8 which has been rebuilt with .030 pistons, larger intake valves, milled heads, edelbrock performer intake, holley spreadbore 650 carb, 340 spec camshaft with Hooker headers, 2.5" exhaust into Dynomax mufflers, and electronic...

Complete Small Bolt Pattern Disc Brake Spindle For Sale (includes wheel bearings, pads, calipers, rotors, spindles, brake lines and anything else in the pictures.) Shipping from San Diego, CA Price: 350 Payment Methods Accepted: Preferably Money order or Paypal plus 3% Came off of a 66 Formula S...

Hey guys, I know i know this is an A-body forum but I just ran into a 1970 Dodge Coronet 500 in the back of some guys yard today. Luckily he was home and showed me the car but wasn't too set on selling it. He said he might give me a call in a few months. Anyways, i know absolutely nothing...

Hey guys. I've decided to part out the Formula S. Same old reasons. Not enough time money or energy to take on a fifth project car right now. It's a numbers matching block with the stock intake manifold and valve covers. Just ask what you are looking for and I'll get back to you with a price...

Hi there, I've got a 1972 318 .030 overbore 1.88 intake valves eddy Performer 2.5 exhaust Holley 650cfm Spreadbore 904 tranny 3.55 gears The runs smooth at about 1000rpm. But once I put it in gear the idle drops and it starts shuddering every so often in a random way. It isn't a...

Looking to get a 904 Transmission for a 318. It can be a core or it can be useable but preferably on the cheap end. I'm in San Diego and don't wanna drive too far to go get one. Let me know what you got and for how much. jake

So I've finally come to the last part of the rebuild. I've got a 318 and 904 and looking to rebuild the transmission to stock. 72 Dodge Dart Swinger. The 318 puts out around 300 hp so nothing major there. To put it simply I know almost nothing about transmissions. I've rebuilt engines and all...

1966 Plymouth Barracuda Formula S. This is a numbers matching car and 273 Commando V8 engine. Everything needed is there it just needs a lot of work. This is a hard car to find but once it's finished it looks fantastic. The car has some body damage to the drivers side rear quarter that needs...

Cleaning out the garage. Just have a couple things left that I'd like to get rid of for pretty cheap. Everything is shipped from San Diego CA. Preferred methods of payment are paypal or money order or cash. Please PM with any questions I'm pretty quick in my responses. Thanks, Jake Chrome...

I have 8 sets of Mopar rallye wheel center caps for sale. Shipping from Alpine, CA Price: Varies between each set Payment Methods Accepted: cash, paypal and Money order All are Big bolt pattern 5 x 4.5 Group 1: $20 Two have broken rims and one is a little out of round Group 2: $25...

Hey guys I'm looking for some opinions on a 1966 Barracuda Formula S that I'm considering. It's got the original 273 Commando and will come with a 904 and 7 1/4. Glass, trim, gauges, interior is all there but needs cleaning and refurbishing. The engine needs a rebuild as does most everything...

I've searched and read about getting it off the steering box but I already have that done. I need to get it off the steering wheel side. Is this even possible? Or am I cutting and welding? Thanks everyone

Hey guys I have a lot of random stuff I'm trying to get out of the garage. I've done business on here before so I'm not new to shipping or paypal or any of that. Everything is shipping from San Diego CA. Payment methods accepted will be money order and paypal (additional 5% will be charged...

Hey guys, I got a 72 Dodge Dart Swinger and am looking to replace the seal that slides in the molding on the rear quarter glass. I was looking on Summit and Rockauto but couldn't find it. Do any of you know the part number for those strips? -j

Alright guys I'm looking to get my 318 a little more fuel efficient as it has now become my daily driver. Here's my setup: 318 block .030 overbore with standard pistons 318 heads .010 decked 1.88 intake valves 1.60 exhaust valves 340 MP purple shaft cam Edelbrock Performer Intake 4175...

I've been looking all over the place for the seal that goes between the drivers door and the quarter window. It is a polished aluminum piece with the weatherstripping that is attached in the center of the trim. Where can I get this piece at because mine has completely rotted away. Here's a...

Hello there, it is time to get something with a little more takeoff than the 2.71s I have in my current 8 1/4. My build is as follows: Dodge 318 .030 over bore 1.88 intake valve 1.60 exhaust valve eddy performer intake 650cfm carb Purple Shaft 340 spec cam hedman headers 2 1/2" exhaust My...

I got a lot of little parts for sale. Prices do not include the cost of shipping. My zip code is from 91901 so you can do an estimate if you'd like. Please PM with any questions and I will get back to you as soon as I can. Aftermarket Air Cleaner for a 2 barrel - $5 Throttle...

Car is a 1972 Dodge Dart Swinger 318 AC and Heater. The engine runs no problems but I have no power to any interior lights, turn signals get no power to even flash once, brake lights don't work, hazards don't work, heater fan doesn't work, no gauge lights, nothin. The bulkhead connectors have...

Got a 22" radiator off of a 73 Dodge Dart for sale. This DOES NOT LEAK. I would have used it myself but decided to go with an aftermarket one instead. Dimensions: 22" Wide 23" Tall both outlets on drivers side rad cap close to center I'm located in San Diego, CA. Price: $60 plus shipping...

I have four 14"x7" American Racing Gambler Rims for sale. These are Large Bolt Pattern wheels. The coating on the aluminum is coming off but other than that they are in good shape. Two wheels have tires the other two do not. I'm located in San Diego, CA. Price: $120 for all 4 Please PM...

I have 3 Small block fan shrouds for sale. 1 is a 22" Fan shroud off of a 73 Dart 1 is a 19" fan shroud off of a 72 Dart 1 is a 19" fan shroud off of a 72 Dart that is broekn in one spot. It is repairable I'm located in San Diego, CA PRICES: 22" - $40 19" - $30 19" with broken spot...

I'm looking at a 1974 Dodge Charger for sale currently and want some opinions on it. I don't have any pictures but can describe it and give you the fender tag. Supposedly has a rebuilt 400ci engine in it (didn't start up when he tried). The paint is bad rust in the interior quarter panels. Dash...

I take my car to the alignment shop yesterday and it drives and sounds great. I go to pick it up today and the guy says that there is a clattering in the top end, I listen to it, and sure enough it's there. I already broke in the engine for the 20 minutes at 3000rpm and then 10 minutes at...

My front end has been completely rebuilt down to the bushing. I'm running 17" wheels that are tucked in there pretty good but will rub on hard turns with down pressure. I'm currently using the cheapie blue Monroes but need an upgrade because the ride is terrible with them. I'd like to keep the...

Here's my build: 318LA .030 inch overbore 1.88 and 1.60 intake and exhaust valves put on stock head Purple Shaft 340 specs cam 4 barrel spreadbore Eddy intake manifold Rebuilt Holley 650 4175 spreadbore carb Hedman headers Currently I'm getting 7inchlbs of vacuum off of my manifold. I need at...

I'm almost positive this can't be right. When the dipstick touches a certain part of the alternator it sparks. It doesn't spark when it makes contact with any part of the alt, but only the part that is hot (I believe). I wish I knew the name of it. This happens when the car is off or on and with...

I'm finishing up the 72 Dart Swinger 318 and it won't turn over. I got a Electronic Ignition system from a 76 Volare at a junkyard which included everything. This is how I wired everything: Orange - to magnetic pick up distributor Grey w/ Black stripe - to magnetic pickup distributor Green -...

I'm finishing up my engine build and have the timing cover and waterpump bolted on the front. The problem is that I found this washer thing that slides over the crankshaft with the notch to align it. I'm guessing that this goes on the lower timing gear on the outside but I don't understand the...