Search results for query: *

thanks for the help

thanks for the help !

wow good stuff guys . thanks

i have a race prepped 360 short block and a pair of closed chamber heads what is the minimum safe clearance i can run .

can you do a swinger decal?

nice. whats your setup/ combination? that looks like it would be a good cam for my motor

how do i get in touch with them?

i know there are some good flat tappet cams out there that have fast ramp rates that will get somewhat close to a roller i hope to have a low 10 sec. car

love the dask panel where did you get it i would love to have one like that ! looks awesome

ok thanks don't know anyone so how could i get in touch with the ones you mentioned . dont have the flow numbers now got lost in the move . but according to the information i have found these heads flow very well . also i am not set up to run a roller cam

i am building a 360 for my dart i have a set of ported B1 Ba heads crain 1.5 roller rockers 60 over 11 to 1 ross flat top pistons port matched victor intake headers built 727 with a 8 in 5000 converter 457 gear 8 3/4 rear super stock leaf springs car should weigh about 3000 nor sure...

i ordered a fiberglass deck lid for my 70 swinger from AAR fiberglass ( stinger fiberglass). installed it today im pretty happy with it . Fit is really good will need some prime and blocking but over all a nice product

I have had them for awhile I know the potential is there for more hp they are going on my 360 for now but I am planning on a stroker in the future .

550 hp is my goal .

i will be running a set of b1 ba's on my dart fully ported wit a ported victor intake

AAR fiberglass makes one I bought one a few years back excellant scoop !

I have used many aftermarket parts over the years doing restorations and AMD is head and sholders better than any others that i have used . just put a quarter panel on my dart and it fit like an oem quarter

what u r doing is is altering the scoop so it is a bolt on useing the same material . the problem you deal with when you bond a scoop to a metal hood is you have too diffrent materials metal and fiberglass that with the change of tempature heat and cold will expand and contract diffrently...

The way i would do this is to glass the scoop with a inside flange and make it a bolt on scoop you can put a piece of plastic sheeting on the hood lay out some glass and place the scoop on it and let it dry it will fit the hood perfectly .remove it and reinforce it on the inside with some...

Ok got a little done tonight got the quarter fiting up pretty good still need a little tweaking before im ready to weld but so far so good These quarters fit pretty good . I had to do a little triming here and their but i really like the panels her are a few pictures

Yes that is a great little welder i have used it on many restoration projects. I dont use extention cords on my welder i have outlets every eight feet in my shop so i can use it about anywhere i need to. Its always good to have a electrician for a friend . I did a street rod for him and he...

Got the panels cleaned up and coated i will fit the quarter tomorrow and take some more pics. Jeffro

25 years in the bodyshop evercoat rage is the best i have ever used no pin holes easy to use and sands easy and you can mix it with the evercoat metal to metal finishing glaze too if you want to thin it out a little . and when your done your done Prime it and go .

Got started on the Swinger here is what i have so far have the old quarter panel off .Now i am ready to clean up and prep for the new quarter here are some pics Yes i have tubed it out but dont be alarmed it is not a 340 car it started life with a 225 . I have a built 360 with B1 BA...

nothing like it im hooked too!

Thanks for the link

Anyone runing any B1 BA heads i have a set for my dart swinger build . had them ported at muscle motors . Building a 360 11.0 compression 60 over mp performance cam 312 557 victor 340 intake demon 750 carb 1 3/4 headers 457 gear

I like the lincoln youcan get one for around 600

Got my quarters in today wow these are nice if they fit as good as they look it will be awsome . I will start working on the the swinger tomorrow after work. i will take pictures as i go . If there any ideas of what you want to see let me know and i will try to get them .thanks Jeffro

looks good did you use the full panel or splice some where?