Search results for query: *

Well I've got the chance to pick up a Dana 60 with 4.10's and a posi unit that came out of an early 1970's dodge pickup. The guy said the measurement was 56 3/4 inches from backing plate to backing plate. My question is, for $250 bucks, is it worth picking this unit up? How much modifying am...

Could you check shipping for the K member to 98926? Thanks.

Hey ill take it for 50 shipped... pm me your info. To send a cashiers check

Would you do $150 shipped to 98926?

Looking for a quote from Dallas Texas to Ellensburg Washington. I'd need it in about 2 and a half weeks. Picked up around December 8th. Any takers??

Hello- Was wondering if anyone had recommendations on a vehicle transport company? I need to ship my duster from Dallas, TX to Washington State. I just don't want to get ripped off and would appreciate any recommendations on good companies you've used... or ones NOT to use too! Thanks

How much would you want for just the Adapter piece?

Dang! Wish you were closer! You wouldn't want to just sell the turbo set up would you??

Hey drtybttr I PM'd you back. Yes I still have them. They have the oil rings on them but don't come with the top two rings. Thanks

Thanks Kuda, ya they are std. bore for a 360.

top

Hey UOP, don't waste your time on people that obviously have no idea what they're talking about!! Hey by the way thanks again for letting me borrow that lift, I've got the engine back in and running like a champ!

Ok, so I just got a chance to take a look at everything and sure enough my flex plate bolts sheared off! Why the heck would that happen? I think the plate could have been bent a little, would that do it?

I have a set of standard bore Keith Black 190 pistons for sale. These pistons are basically brand new, I used them to mock up an engine so they have a few marks but they've never been in an engine that was fired. These are high compression pistons with a .050 dome top with valve reliefs. Comes...

Hey guys. So this is a start up of my newly rebuilt 360. New Cam, pistons, intake, etc. etc. This is a few days after cam break in was completed. Had no problems before. You'll notice some noise right about when I get up close to the engine with the camera. Does anyone have any idea where...

Hey all, I REALLY need an engine hoist to get my 360 put back in the Duster. Problem is, I only need one for about 3 hours and I don't want to shell out 350 bucks for one to sit in the corner! Does anyone know where I could possibly rent one? Or does a local FABO member feel like renting one...

Well, I just finished buttoning up my first Engine restoration. I pulled the 360 out of my 71 Duster to freshen it up and add a few parts to wake it up. Ended up putting in new KB 107's, Lunatti 268 cam, restored some old Iron heads with some port/polish work, and topped it off with an Eddy RPM...

Would anyone be interested in trading a manual steering box for my stock power steering set-up? All parts work perfectly, have all parts, brackets, hoses and bolts. Need a good manual box that is tight and working well. Interested let me know!

Ordered my 901's yesterday! Thanks for the info guys.

Ok, 412 Stroker or Crackedback, what size shims do you think I would need? Stroker, are you using shims with your set up, and if so do you have a part number? Thanks!

What is a good single spring that would handle about .515" of lift? Lunati recommends a double spring for my new cam, but i'd like to stick with a single spring so I don't have to have my heads machined.

Here's a few of my son helping out! He loves workin on dads "loud car"

Ya, more interested in Torue than peak HP numbers. This will be a street car so I'm looking for a lot of grunt on the bottom end. Close to 400 lb-ft. would make me happy for sure!

I know there are a ton of these threads, but I'm interested in a ballpark figure for how much torque my 360 should be pushing. 360 block .060 over KB 107 Flat tops Iron heads with small 1.88/1.60 valves, gasket matched and ported (don't know flow numbers) Lunatti Voodoo 268 cam, .494/.513 lift...

Do you know what lift these are rated for?

Thanks Kursplat, I think you're right. The holes look just a bit wider than my Rpm Airgap set up for J heads.

I've got an older style M1 Mopar Intake. Don't know a ton about it but looks like a good Intake that someone spinning High RPM's could use! http://dallas.craigslist.org/ndf/pts/2481791800.html

Hey, I just replaced mine with an RPM. Cleaned it up and painted it, looks good. It's in great shape. $120 plus the ride. If you want pics send me your email and I'll try to get you a few. Let me Know!

Just put these up on Craigslist as well... here are the links so you can access a few pics of the intake and pistons. Open to offers! Intake: http://dallas.craigslist.org/ndf/pts/2472804282.html Pistons&Rods: http://dallas.craigslist.org/ndf/pts/2466134248.html

Can't seem to get my pics to upload, so if you're interested just PM me and I'll email you the pics that I have.