Search results for query: *

I have a holley 3310 750 on a mopar 380 horse crate motor. The secondaries will not open. I have the quick change spring kit on the carb. I have changed the diaphragm, tried it with and without the check ball, tried all springs in the holley spring assortment. I currently have no check ball in...

Looking for a fresh or fairly fresh set of big block heads. I'm putting together a fairly stock 440. Not particular on which castings. Just looking for something ready to bolt on.

I got out of racing 8 years ago and sold most of my racing stuff. went to the track a few weeks ago just to watch and got the urge to race again. I figured my 67 barracuda notchback street car would be a good choice to race in the street class and keep things affordable. The car has full...

I'm looking for a stock small block oil filter adapter plate and hollow stud. I need the 4 hole adapter plate. I have one which is a 6 hole from a magnum engine but it does not fit tight to the block. Thanks

Is it within the rules to post a thread asking for help locating a member? there is a member that used the classifieds here to steal money from me. After giving this member negative feed back another member contacted me and said he has the same problem with this individual. I only have a 1st...

Looking for a nice black front driver side arm rest for my 67 barracuda. PM me if you have one with price. shipping would be to 16137. thanks.

I need a driver side exhaust manifold for a 383 non HP. casting number 2532626. these came on 66 - 69 B bodies - possibly others. PM me here with price and shipping cost. I'm in Mercer, PA 16137 will buy pair to get driver side if necessary

This is a converter I got with a drag car i purchased in 2005. I was told it was new and it appeared to be new. The previous owner did not know the make or stall since he received it when he bought the car and could not remember what he was told. The inside of the converter was perfectly dry...

I have a set of 3:21 gears just removed from a 8 1/4 rear. These gears ran quiet with no issues. I just had a sure grip unit installed and switched to 3:55 gears is the only reason for removing these. The ring gear is still mounted on the open differential but I can remove it if someone just...

I have for sale a sure grip unit unit for 8 1/4 rear. This unit will only work with 2:45 or numerically lower gears. This is a new unit that came with one of my cars. I tried installing it with a set of 3:55 gears and found it would not work. I learned that 2 different sure grip units are made-...

I'm looking for a set of fresh big block heads ready to bolt on and run. I'm going to run stock non-adjustable rocker gear so no excessive milling of heads. Prefer 906 or 452 but all will be considered. PM me with what you have and price. I'm in NW PA 16137

I'm looking for a pair of big block manifolds to fit my 67 Coronet. The manifolds don't necessarily need to be high performance type as long as they will fit a 67 B body. Please PM me with what you have and price. I'm in NW PA 16137

I have a 3 core Champion radiator in a 67 Barracuda. I'm not sure of the part number. I bought it off Ebay and I do remember the 1st one I ordered that was supposed to fit my car was a little too tall and the cap touched the underside of my hood. I sent that one back and got one a little shorter...

I have a 67 Barracuda with a 360 and a 727 trans. I pulled the trans out and took out a 11' B+M converter and put in a 10 " converter that came out of my drag car a few years back. The 10' converter worked fine in the drag car and stalled around 3500. I believe I was told it was a Dynamic...

I have a 67 Barracuda with a 360 Magnum, 727 trans and Flaming River manual steering. Will a set of Doug's headers fit? I know they should clear everything but not sure about the steering box. I do have a mini starter which I've heard is needed if you have a 727 trans.

How much horsepower will a 8 1/4 rear take? I have an 8 1/4 rear in the car now and the car came with a new sure grip unit. I'm debating on whether to install the the sure grip along with lower gears or switch to 8 3/4 rear. The car has a 380 horse crate engine. I figure I can probably set up...

One of my cars is a 67 Barracuda notchback. I had a fresh 360 in it .020 over all stock except a performer RPM intake and 600 Holley 1850 carb. I came across a 360 / 380 horse power Mopar Performance crate engine that was brand new and decided to buy it and throw it in the car. I had read a lot...

Does anyone offer replacement odometers for old Mopars? The odometers are froze up on both my 67 Barracuda and 67 Coronet. It causes the speedo needle to jump and the gears that turn the odometer click like crazy. I've had the odometers out numerous times , lubed them, realigned the numers and...

I'm looking for a 4 barrel intake at a decent price for my 64 Fury. I've been debating on modifying the poly or reaplacing it with a LA engine. I figure i'll try to find parts for the poly and go from there. I'm also inerested in other poly parts such as headers, cam etc. PM me with what you...

I'm finishing up a project and selling some spare parts. Most engine parts came from the engine that was in the car when i bought it. This engine supposedly had break in time on it only. ITEM 1 MOPAR 292 .508 lift cam and lifters. i marked and boxed lifters as to which lobe they were on $75 OBO...

I'm finishing up a project and have a few spare parts left. ITEM 1 is a pair of grilles, they need some work but could be used for a driver or be restored $80 plus shipping, ITEM 2 is an original remote mirror, decent shape, glass is good, works well, chrome is hazy with pitting $35 plus...

OK from the beginning. I bought a 67 barracuda original 273 car now has a 360 with supposed 10:1 compression and the Mopar perf. 509 lift hydraulic cam performer intake and holley 3310 750 carb.. The engine I'm told is fresh and it appears to be. I had the car running decent but I wanted to...

I'm looking for a small u joint (7260) drive shaft. 46 and 1/2 inches between u joint centers. I have the slip yoke. 47 inch would probably work also. Thanks.

Does anyone have a working 120 mph speedometer for a 67 barracuda? I bought my car with 150 mph speedometer in it but it did not work. I got the original 120 speedometer with car but the previous owner switched the odometer to the 150 speedo and messed something up and the numbers don't line up...

I'm looking for the small wiring harness that runs to the wiper motor for a 1967 barracuda. The wiper motor is a 2 speed (not original motor) and I believe it is correct for the car as the wiper switch only has 2 positions. Thanks.

I'm looking for stainless trim for around the rear glass from a 68 or 69 barracuda notchback to put on my 67. Thanks.

I have a 67 notchback barracuda. I bought windshield trim and clips for a 69 cuda and the windshield gasket is for a 69 part # WCRd690. It looks like this gasket may require a lock strip? I read another post where someone had used this gasket but did not mention if this gasket takes a lock strip...

I need a 73 to 76 driverside spindle from a disc brake A body car or spindle from a 72 to 74 Ebody disc car. Thanks.