Search results for query: *

All parts are from to my knowledge from a 67, that's what I was told anyways other than the 340 intake I'll get the PN off of the intake if needed ****** I am unsure of the year of these parts and verification is left up to the buyer!!!**** Prices are negotiable. Id like to sell...

I have a 1969 Barracuda with power steering and a column shift, I am converting it to floor shift and have another rack out of I believe a dart that is Manual steering, cause it is slightly longer. I was wondering if anyone knew of any other cars I can swap a column out of and it will work in...

Hey guys I'm looking at finally purchasing a set of outer wheel wells and trunk extensions \THEY ARE FINALLY AVAILABLE!!!!! for my 69 cuda, Anyways I noticed Yearone has the outer wheel wells for 129.99 vs amd's 150? Are they all made from the same place and just a different catalog? or is it...

My dad's plow truck transmission is acting up so he is looking at having it rebuilt. Its a mid 70's 727 that he had previously rebuilt about 15-18 years ago, it had a shift kit put in it . Anyways its acting up and he wants to know of some good kits to install. It will be used as plowing 99%...

Decided to pull my wagon out from its resting place in order to clean it out and pull the carpet to hopefully help save the floors, just in case some day my dad and I ever get around to fixing her up. The wagon started life with me anyways with a blown motor, I swapped in another slant six...

Im working on a 67 dart GT for a family friend. It has a stock 340, never been gone though since installed, It also has a 22in radiator that was cleaned before being installed, running a stock 4blade fan. Car does fine if your cruising but if you have to putt around or idle for a while it...

Hey guys, I'm trying to get a 67 dart gt with a 340 to run right, it wont kickdown properly. I have alot of different styles to swap on but I'm not sure which one is going to work the best, Does anyone have pictures of a kickdown setup with a 340 and an edlebrock carb? I was driving it today...

Im working on a 67 dart for my dads friend, im putting a gas tank in it and need a grommet for the filler neck, year one has one listed but for 68 and up, what is the difference, the tank is the same, just seemed weird that it wasn't for 67 also. The guy ordered one for a 68 and we are going to...

A friend and I got into a discussion on swapping a new hemi into my barracuda, he was thinking 'oh a 5.7 hemi truck motor and trans should just drop in with some 'easy' custom mounts and whatnot' This isnt a chevy pal lol! but anyways what are you guys spending to do a complete swap to a 5.7...

woohoo well now i have 2 fishs :-D its a parts car, the bumpers were better then mind so that was worht it there, along with it has the upper parts the the seat belts, and floor shifter brackets i need. 68 318 v8 car, auto, 7 1/4 rear, bummer since i still need a rear end and actually a 4...

My dad just finished up his truck floor on his 70 dodge challenger convertable, and he now needs to install a spare tire bracket, his has some pitting and he was wondering if i could find him one online. I tried looking at paddock and year one with no outcome, so if some of you guys could keep...

Hey guys i was just looking over color charts for plymouth and noticed according to the ppg paint book, according to mymopar.com, it says the code for b5 blue is different from 69 and thoughout the 70s, i was wondering is the color actually a different 'hue'/shade or is there something i am...

I reinstalled my 904 into my cuda last year and it leaked, always did, i put a new pan gasket on it and filter, still leaked, figured it was the dip stick o ring, fixed that still leaks. I left it alone last year didnt have the time to redo everything, well now onto this summer i am going to fix...

check out what my friend sent me today, must have been an option :thumbup:

Which kit are some of you guys using, id like to install a kit in my cuda, just mainly bushings, tie rod ends, ball joints, and what not. Should i hold off and wait untill i get discs up front. Id like to maybe autox my car, yet now i got the daytona thinking of making that the auto x'er. I at...

Hey guys, well about 2 months ago i pulled the barracuda outside to blow it off from all the dust that had collected on it from all the body work, and when i started it up it had a lifter tick. I though maybe it would go away after oil pressure came up but it didnt and now it ticks bad :( bummer...

http://www.daimlerchryslervehicleproblems.com/ i found this today as i am usually looking at chrysler related stuff :D what do you guys think is it bs or not? how about the transmission discussion? thoughts?

Well i was working on my blazer today, and got a wild hair to try and start up my 66 dart wagon. It hasnt run since november 6th of 2005, this was the day of the terrible fire and a day that i will never forget in my life, while droping the gas tank, gas splashed on the trouble light i was...

Well ive been thinking hard on getting a newer car lately and i cant really think of anything (besides an old mopar) that i want, a srt4 crossed my mind but to much money and i probably wont be able to buy one, and they have all been rodded on around here. I would like to get a shelby version...

hey guys i was wondering on something, im putting a eddy performer intake with a 4bbl holley on my 69 318, i was wondering are the gasket sizes/ports different sizes? Should i just get a set of 69 340 intake gaskets so that i know the intake port are the right size i dont wanna put a small...

Hey well my car is getting closer to road worthy ive even drove it around a lil but no left fender so no lights = no crusing nights :( bummer anywas, woo finaly :thumbup: anyways now that i get some actual money at my new job i want to upgrade my supsention. first off my drivers side lower ball...

Hey guys well tonight i finally riped apart my holley carb with my friends assistance, and he was telling me on how he and others have put metering blocks on the secondary sides of holley's so you have jets you can tune, this also eliminates having to drill the secondary holes to flow more for...

Hey Guys well my cuda's factory gauges don't work and probably wouldn't be reliable anyways, i was going to put the typical 3 gauges under the dash or perhaps where the radio once was. I was just looking for some input on what you guys are using, i have some Equatis or how ever its spelled...

Well my power steering working in my cuda last summer, well over the winter i took it apart to rebuild cause it leaked bad. Well i rebuilt it and everything and now it doesn't work, it has fluid in it, it turns (the pulley) all that but no assist, should i just get a re manufactured one now? :(

Well first off with me its to drive my cuda to the local cruise nights, and go cruising, yes i know its slow but o well, it will be fun. All i have to do is finish the drivers side fender then i can bolt on the front end and install the headlights so i can cruise at night :headbang: i cant...

im buying a holley 1850 (600cfm) i dunno about the secondaries. carb and edlebrock intake (rpm) from a guy i work with. it came off of a 318 and i wanted to know how hard it will be to rebuild the kit is $22, and im buying everything (w/o kit) for $100. how does that sound to me it sounded good...

any one have some guides on how to check these components on my car, its got a somewhat weak spark, gots fuel and compression. new coil (found how to test it now), got a old volts reg on her now, hwo can i check to see what the problem is the ecu box is new, can i check that? :-|

well go figure my car is going to fight me all the way, i got the engine installed, then bad waterpump, leaking bypass hose and trans dip stick woooo not, anyways, well i got my waterpump back in, fixed the snaped off bolt and such now it wont fire. it turns over for ever, has fuel, spark (maybe...

well i need to check to see if my heater core is leaking and what not, concidering when i got the cuda it was all by passed, i was wondering any tips for removing the heater assembly, also on testing to see if the heater core is good or not, maybe just attatching a hose to it and putting some...

Well i finaly broke down and have my complet engine bay stripped, i was wondering when i sand blast i wanna primer right away what kinda primer should i use. i was thinking epoxy primer, maybe nason, also what color was the k member painted along with the steering box, heater blower motor, and...