Search results for query: *

This works great. I tried it over several weeks and the little build up can be wiped off no problem. Thanks QUOTE="71gtdart, post: 1971526612, member: 31196"]Im not saying my way is the only way, but if you want something that works 100%, doesnt harm your paint, and is quick and easy then here...

I have a 1977 Dodge Aspen that is street driven and raced weekly at a local track. My problem is burn out rubber on the rear fenders. I have mud guards but they don't stop all the rubber. The tires are MT 275/60/15 drag radials. It's a pain to clean the fenders each week. Are there any other...

The compression ratio is somewhere between 10 to 1 and 9.8 to 1. The motor made a peak 509 ft-lbs @ 3900 and 430 hp @ 5300. Right now the plugs ngk heat range 7 seem to be a little too cold but I don't have any previous experience with aluminum heads. The carb used is a quick fuel SS- 650 which...

I have a 318 stroked to 390 with eldebrock aluminum heads and air gap intake. I am looking for a some suggestions on what spark plugs might work best. I usually race it once a week and drive it on the street to and from the track. I checked eldebrock site and they recommend champion ion rc12yc...

Happy New Year I'm looking for either Centerline or Weld front wheels with or without tires. 15" X 3.5" -- 5 bolts @ 4 1/2" centers to fit a 77 Aspen drag car. I'm located in western new York. Please include shipping in your price to zip code 14055. I am willing to travel 2 to 3 hours to pick...

All parts sold except adjustable rocker arms. $150 if interested

1978 E-58 360 CI motor heads #4173915; with #4071051 manifold very low miles very little wear showing on cylinder walls. 273 rocker arms machined to 1.5 # 3830945 intake manifold original condition #4448308 cylinder heads original conndition TRW .040 forged pistons...

sorry poor/dumb choice of words looking for inexpensive wheels

I have a 77 Aspen SE coupe (390CI)that is racing in the 1/8 mile. It turns 8.2. @ 84 MPH my goal is to get into the seven's.I want to lose some weight in it over the winter. So could anyone point me toward some cheap front wheels for the car. I would like to get something 4" wide and my wheels...

Still for sale. I think the bracket allows the springs to be installed in "a " bodies

I have a set of 3.23 gears for sale for a 741 unit. Excellent condition ring pinion pinion yoke $85 plus shipping

I have new rear springs & mounting brackets for sale Springs(left) Summit P4452983 Springs(right) Summit P4452982 Special install Brackets Summit P4120079 $150...

I ended up finding one yesterday so I'm all set Thanks again Dave

I know this is an A body site and I have already placed this on the F body site but just in case I will place it here as well. I'm looking for a speedometer/dash cluster for a 1977 Dodge Aspen. I have attached pictures on the unit in my car. Thanks Dave

Thanks I'll try that tonight

Thanks that's good news

I have a 998 transmission behind a stroked 390 engine. After about 1500 miles the transmission was slipping badly and when it was removed there was a lot of band material in the pan. The transmission has been repaired. My question is concerning the torque convertor. Is there any way to flush the...

I'm looking for a recommendation for a good place to purchase a TQ rebuild kit. I have found several suppliers but since this is my first time doing this, I thought you guys with more experience could recommend a quality supplier. The unit is off a 74 360 motor if that is important. Thanks Dave

The 3830945 was standard on 1975 through 1978 360 4bbl cars From what I can find the 3830945AL or L were standard on 1975 through 1978 police cars. I would really like the AL or L model if I can find it. Thanks for looking Dave

I am still looking for one of these manifolds Thanks Dave

I'm going a little higher based on the results I had with a 318 stroked to 390 similar cam but a roller and smaller carb and less compression. My guess is 425HP and 425lb-ft torque.

I am selling a 20-810-9($160 plus shipping). It has less than 2000 miles on it. I am building a IHRA Pure Stock and I can't use it. Here is the set up I had it in and it was a GREAT street cam. I have a 77 Dodge Aspen 2dr(3500lbs) 318 stroked to 390, EDDY heads, air gap intake ,650 quick fuel...

Price Reduced to $160 plus shipping location Western NY 14055

I have a set of unopened cat whiskers for a 76 - 80 Aspen/Volare 2 dr. Parts are by Steele Rubber Products #80-0593-57. $75 plus shipping. There current price from Steel is $159. Here is a link to the Steele Rubber site...

I have this cam for sale right now($175 plus shipping). It has less than 2000 miles on it and is in perfect condition. It was a great street cam. My car had a 318 stroked to 390 with Eddy magnum heads and 600 CFM quick fuel carb. I had it on a chassis dyno and it made 345 HP at the rear wheel...

Here is a link to this cam specs as well as recommended applications http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=650&sb=2

Let me know what other info you need.

I am attaching the dyno test for this cam. It was in my 318 stroked to 390 with aluminum heads and 600CFM quick fuel carb. If you are interested in more info let me know. Dave

I have a small block Comp Cam #20-810-9 hydraulic roller cam for sale. The cam has less than 2000 miles on it and is in perfect condition. This is for the cam only I don't have lifters for this. Great street cam . The pictures aren't the best if you need more information PM me. $175 plus...

I have a small block Comp Cam #20-600-9 hydraulic roller cam for sale. The cam has less than 1000 miles on it and is in perfect condition. This is for the cam only I don't have lifters for this. The pictures aren't the best if you need more information PM me. $175 plus shipping from Western New...