Search results for query: *

Hey guys, I have seen a few hood pin kits offered online for the B-body A12 cars. Will those kits work for mounting a lift off six pack hood on a 1971 Demon? Is there a separate kit somewhere? I looked on the AAR Fiberglass website and saw nothing. Will the A-body also require brackets to...

Hey guys, Finally getting back to reassembling the car back together and despite taking the time to mark and bag all of the pieces for the dash they are now missing. Any idea of a vendor for reproduction dash hardware (mounting the gauge cluster to the dash, gauge face plate, etc)? Thanks, Brian

Hey guys, I was able to help my brother put the 360 and 727 into his 71 Demon. Everything went smoothly (no scratches, dents, or broken parts). However, I do have a few questions. First off, he is running a set of HTC coated Heddman headers and it appears that one of the tubes is...

Hey guys, I have a couple new MOOG lower ball joints (K7023 and K7021) for sale. Both have never been on a car, come with all of the extras (zerk fitting, cotter pin, castle nut, rubber dust boot), and have been painted cast gray. $100 plus shipping from 60050.

Hey Guys, I am torqueing all of the front end parts to specification today and was wondering what parts have to be under load? I understand that the lower control arms, and lower shock bolts do. What about all of the others (upper a arms, strut rods, etc)? Engine and transmission are out of...

Hey guys, These are all parts that are left over after putting the front suspension together on the 1971 Demon. Most of them were duplicates that I didn't need. The first "i'll take it" gets it. Please PM or email me if you have any questions or need any additional pictures. 1 New MOOG...

Hey guys, I am piecing together the new front end on the 71 Demon and am missing this front suspension part. What is is called? I'm guessing that Moog makes a decent one? CDD26D06-6274-4092-886F-261FA8B28E41_zpsjt4bgsyr.png Photo by raupleminze |...

Hey guys, I'm looking for a gasket that goes in between the base of this part and the trunk floor for a 1971 Demon. It was a white foam originally, and I am not sure what it is called. Any ideas where I can find a replacement? Thanks in advance, Brian

Hey Guys, Is there supposed to be a washer in between the castle nut and the dust boot? Thanks in advance, Brian

Hey guys, I am looking for a starter for my brother's 1971 Demon. The engine is a 1995 Magnum 360 and the trans is a 727 out of a 1970 Duster 340. What type of starter should I be looking for? I think I have heard that some material may have to be removed from the block to clear for...

Hey guys, I have a brand new set of BBP Upper ball joints for sale. Part #K772 these have never been installed and include the castle nut and zerk fitting. Perfect addition for when you do your big bolt pattern upgrade. $10 plus the ride. PM me if interested. Thanks

Hey guys, Is there a place to find a step by step or even a video on how to install torsion bars. I have a 1971 Demon that I have to install the entire front suspension, k member, and drive train. Thanks in advance, Brian

Hey guys, The time has come to select a carb for the Demon. The car will mostly be a cruiser with occasional strip time. Here are the engine specs: 360 Plate Honed-Decked Square .040 over KB #107 Flat top pistons File Fit Rings 5/64's Stock Rods Resized w/ARP Bolts Stock 360 Crank 010/010...

Hey guys, My brother has a 71 Demon he would like to buy a bumper to bumper wiring harness kit for. Only things on the car that won't be stock are a aftermarket tach and an MSD electric ignition (aftermarket distributor). I know that painless has a kit. Who else do you guys recommend...

I am looking for a clean pair of factory upper control arms or a-arms. I would prefer some that already have new bushings/ball joint and paint. PM me if you have a pair. Thanks!

Hey guys, Im still SLOWLY getting the 1971 Demon back together and hit another roadblock. In case you guys don't remember the car has been media blasted and painted on the bottom/engine compartment. I have been assembling the front suspension onto the K member and decided to install the...

Hey guys, About to mount the engine to the K frame and install the drive train from the bottom. Before I started I just wanted to make sure that the 1970 340 brackets and rubber mounts would still work for a 1995 360 magnum? It appears that they will I just wanted to get some feedback. I...

Hey guys, I have a manual steering box out of either a 70 duster or 71 demon that will be installed in a current project. Is there any rebuild kits offered for these? Is it a simple process? If not are there any places to send it to be rebuilt? Thanks in advance, Brian

Alright, My brother and I are ready to attempt getting his car off of the jig and onto the ground. Right now the rear end is the only driveline component in the car. We are hoping to use an engine hoist to bring the car up and install the engine/trans together on the K frame. Does anybody...

Hey guys, Going to mate the engine and trans together soon. Its a 360 and 727 and if I remember correctly you bolt the flex plate to the engine side before mating them and not to the torque converter right? Torque specs for bolting everything together? Thanks in advance, Brian

Hey guys, I was going to bolt up the 727 to a 1995 360 (I think its a magnum block) the other day and I was using 3/8" bolts and it seemed as if they did not want to thread. Am I usung the right size and thread pitch bolt? Anyone know the size off hand? These components were never together...

Hey Guys, Trying to clean up the garage and have a bunch of stuff I am selling as a package deal. -12 225 S6 pushrods -5 225 S6 Valve Cover Triangle Washers -1 225 S6 Carter Mechanical Fuel Pump #3418648 -2 Small Block Chrysler Cam Plates? -2 A-body Leaf Spring Bolts -1 A-body Lower Control...

Hey Guys, My brother and I have started to run the fuel line on his 71 Dodge Demon and have run into a few problems. The car will be a street/strip car. The car is going to have a 360 installed, a mechanical fuel pump, and has a new reproduction fuel tank and sending unit. We had a prebent...

Hey guys, Up for sale is an excellent condition B&M #10242 Flexplate for 360 to 727. This item was used for mock up only and has never been installed in a running drivetrain. This item sells new for $80. I can provide additional pictures or answer any questions you may have. $60 plus the ride...

Hey Guys, I have a manual steering box that has been sitting for awhile. I have cleaned up the outside and have it ready for paint. Everything moves freely and there doesn't appear to be any leaks. Are there any recommendations of what to do before paint and install? Are there seals that should...

Hey Guys, My brother has had the underside of his 1971 Demon painted and now it is time to install the new inline tube brake and fuel lines. The problem is he never took any pics of the old line routings. I was wondering if anybody had some detailed pics from a resto they could post in this...

Hey Guys, Bought an engine a couple years ago that was built by a machine shop. They builder has been impossible to get a hold of to ask this question so I figured I would ask you guys for help. The engine specs are as follows: 360 Plate Honed-Decked Square .040 over KB #107 Flat top pistons...

Hey Guys, I am looking for the piece of sheetmetal that is on the driver side of a 71 Demon at the sill. It is on the interior of the car and is used to cover the wiring harness before the carpet is installed. Please PM me or email to [email protected] if you have the part. Thanks, Brian

Hey Guys, I got a very frusterated phone call from my brother earlier today. He was putting all of the linkage back on his 727 and had a problem. He had painted the trans (making sure not to get paint inside the hole), and painted the bolt (threaded on one end and a shaft on the other...

Hey Guys, I have a few parts I wont be needing for my project. 1-1970 340 Flexplate blasted and painted $15 1-1970 Duster Trunklid rustfree $20 Pick Up Only 1-1971 Demon non rally dash frame great condition $15 Pick Up Only 1-Pair of 6cyl 1971 Demon Torsion Bars (they still have yellow...