Search results for query: *

I've got a running 318 with 4.5 volts between the 2 leads on the coil. If I unhook the power wire from the coil the wire shows 12 volts. Is this normal?

Hi, looking for an Edelbrock(or Carter) 500 cfm 4 barrel....must be willing to ship to Canada....thanks.

Hi, I'm looking for a 4 barrel single plane intake for the small port 318, like a Streetmaster, Street Dominator, or Offy dual port. For a reasonable price or less. lol Thanks!

Hey, I'm looking for a lunati 256/262 or comp xe256 or something similar with about 210°-220° duration at .50, 250°-265° advertised duration, and a hydraulic lifter set and double roller timing set, new or slightly used....Cheap! I'm also looking for a set of long tube headers for a '72-'93...

Hey, I've got an AFB 3612s and I'd like to know haw many cfm it's rated at....all I can find is it came on '63-'64 383s. Anybody know the cfm rating?

Hey all, I've done a lot of reading on shift kits and I've found that almost everybody prefers transgo, I also noticed it's possible to modify the valve body yourself without a kit and save some $$. Now I now that wouldn't do everything the transgo kit would but.... I've got a supposedly...

I have a '75 318 with an Edelbrock torker, a 570 vac secondary Holley and dual exhaust. I want more low end torque, (don't care about power over 4000 rpm) I'm thinking of upgrading to a Weiand dual plane or LD4B eddy. I don't really want to swap the cam, will putting 1.6 roller rockers make a...

I don't mean to bust nobody's chops but, where is everyone getting the info that putting 360/340 heads on a 318 will drop the compression as drastically as they claim??

What does having say a .440 lift int. and a .400 lift exh. and int. duration of 210° and exh. of 200° do?? Don't you normally want as much or more lift and duration on the exhaust than the intake??

Does anyone make a wide 14" tire these days? I know M/T makes the Indy Profile in a 345/50-14, But I'd like to go with Radials. I have GR50-14 Goodrich's now and I love the look but they're so rotten and cracked.:violent1:

I got a set of casting 3462346 heads which should be the 70-72 open chambers, and they have dual springs and aluminum retainers. Must be aftermarket of some sort?

I have 2 383s, one is a seized '69 2 barrel and the other is a '67 magnum 4 barrel with a blue crank. Can I use the '69 2 barrel crank (working on getting it un-seized) in the '67 magnum block?

Hello, I bought a 727 big block torque converter from a buddy a few years ago and he said it was a high stall, is there any way of telling how high? I know it's a long shot, :banghead: but the numbers that are stamped on it are 4443 3 and 160 98 it was originally gold and probably purchased at...

Hello is an Eddy TM-5 tarantula intake very rare? The torker 340 was supposed to replaced it and its not a very good intake bellow 3000 rpm. So is the TM-5 worse? About what time period were they built? Thanks

Hello, I have my heads off right now and was wondering if I could grind off the egr bumps in the exhaust ports for more flow??? They're plugged now anyway

Hello, I have a Holley List-3667 and I want to know what the cfm rating is. I did a search on google and figured out it's apparently from a '67 440, but i couldn't find a cfm rating. The other number in the choke horn is 2843151. I also measured the base plate pri and sec openings(both the...

Hello, I have a '75 318 and I like almost everybody else am looking to get a bit more snort out of it. Would 2.02 and 1.60 (340) valves fit in my 318 heads? I realize I'd have to grind the seats, but would i have to change the seats or are there any clearance issues to worry about? Thanks very...