Search results for query: *

I have a bumble bee stripe that's been in a box for about 12 years. What kind of shelf life do those things have? Should a new one be ordered or would it be ok to put that old one on?

Does anyone have photos of the sail panel board that go under the headliner on a 1970 dart? Also does the headliner get glued to those panel boards? Thanks!

Is there a rear mount/support for a thumbwheel radio for the rallye dash or is it just the two front ones that attach to the dash frame? It’s for a 1970 Dart Swinger. All that weight seems like it would sit on the ashtray below.

I’m using Noico sounds deadener insulation on the firewall instead of the stock fibreglass & cardboard insulation so I now have the holes in the firewall where the plastic pins would have gone through. Any ideas of what I can use to cover those holes up? It’s for a 1970 dart swinger.

I have some donor rear frame rails (not exactly sure what year car they are from) and wondering if I can weld up the hole that I've marked on the photo as it's needing rust repair on both rails. If it isn't needed for a '70 dart swinger, then I'd sooner close them up then recreate them.

For my 1970 dart swinger - Is there supposed to be play in the door latch when the door is closed/engaged in the striker pin? I don't currently have the door gaskets installed and the door sits flush with the quarter panel when I pull the door as if opening it but if I push it closed it gets...

I have been in the process of installing the scarebird kit on my '70 dart swinger and am not sure which side of the spindle the caliper is supposed to go on. The old instruction sheet I got (which was from 2007) says for the 10 inch drum set up that the caliper opening is supposed to face the...

I am welding in my new quarter panel and it's buckling at the middle body line (the line below the gas cap) to the left of the wheel house on the driver side if there is any pressure in the area. I have to pop it back in place or it will stay pushed in. These are the cheaper quarters made of...

Is it ok to install subframe connectors while my car is on a rotisserie or should I wait until get it back on wheels to install them? I've already put in floor pans and done the rocker and quarter panel on one side while on the rotisserie. The doors still close perfectly so it doesn't seem like...

What's the function of the rocker panel under the quarter panel? Does it provide any structural support? Mine is totally rotten so I had to cut most of it out and am wondering if I should spend the time rebuilding it or if I can just cut the rest of it off. It looks like the original rocker went...

I ordered a new dash bezel for my 70 dart rallye dash and got another dash bezel in the same box that i never payed for. Anyone know what kind of vehicle this is for?

i think i am missing an adapter for my steering wheel horn ring to attach to the rest of the steering wheel. Looks like it got misplaced during the dismantling the car. Does anyone have any idea what it looks like? I imagine it would be something circular that bolts in to the horn assembly...

The ignition lock cylinder in my 70 dart pulls right out of it's sleeve without a key. It looks as though the little pin that holds it in there doesn't line up with the hole inside the sleeve. Is it possible that there is a different years ignition lock cylinder in there? It started the car no...

I'm looking for the little black handle for a heater box fresh air vent door for a 70 dart swinger. Don't need the door. Just the handle. Let me know what you have. Thanks.

I have rust on the inside of both a-pillars on my 70 dart and am not sure how to go about replacing the metal in those area. It doesn't seem like it would be very easy to get a welder and grinder in there. Anyone done this kind of repair before?!

i have an extra 70-71 grill with no headlight bezels. a few of the mounting clips on the rear of the grill are broken. great condition otherwise. also comes with the turn light covers (not pictured) 225? obo? pm me

Selling my original rallye dash bezel so I can get a repop and put back in a thumbwheel radio. i have the glovebox bezel as well that will be included. 150.00 plus whatever shipping would be. PM me if interested

I pulled my dash out last night and found a few wires that are stumping me as to what they are for. I have a 70 Dart service manual but it doesn't have the rallye dash wiring diagram in it. If it helps the car has a centre console, no A/C, no rear defrost, factory tach, power brakes, power...

I found this great link for fixing/replacing door hinges. Apparently the door hinge for 63-76 A-bodies is the same hinge for 72-93 dodge ram d-series or w-series pickup trucks. All you have to do is ream one of the threaded holes out and you have a brand new zinc coated hinge for around 30...

Hello! I figured I would finally start a restoration page for my 1970 Dart Swinger 340. It has the matching numbers motor, rally dash with tach, bucket seats and centre console, power breaks and steering, and a few other goodies. It was originally F8 green but I think it's going to be go mango...

I am looking at some rocker panels from classic2current and they list two different ones for my 70 dart swinger. I am having a hard time differentiating between the two. This is the only info on the listings: 1967-76 Dart 2dr Outer Rocker Panel, RH [190-010-2] Fits 1967, 1968, 1969...

I am having a difficult time deciding what to do with this driver side rear floor pan rust under where the rear seat clips in to on my 70 dart swinger. I can't find any replacement metal for this area so I'll have to make something myself. Does that whole piece come out that has the rear seat...

Can anyone take a photo of the outer wheel well where it meets the quarter panel looking towards the front of the car? I am replacing the quarter panel and am missing a bunch of metal in that area due to rust. This is for a 70 dart swinger. Thanks in advance!

I am looking for a shifter cable for my auto trans 70 dart swinger center console. Same one as the lower one in the attached photo.

In the process of restoring my 1970 dart swinger centre console I ended up breaking off the threaded end of the shifter cable inside the shifter push button. I've looked high and low for a replacement shifter cable but haven't been able to find one anywhere. Anyone know where to get one from or...