Search results for query: *

Having exact same problem. Did you have any luck with replacing?

I'm new to the performance automobile handling world, I'm sure it's like barbecue everybody has their own recipe LOL Willing to take everybody's opinions and experiences and formulate my own sweet ride

I just installed new PST 1.03 front bars. I need to pick new springs as the rear is really sagging. I'm not trying to build a G machine but I would like some solid Road handling. Perhaps maybe even get it on a road track in the future. That's my build goal. 1. Should I stick with PST rear...

What color are they painted?

Worm shaft seal leaking crazy!! Figured I'd give a shot at a repair. Found out the correct seal number and got one. Pulled apart and cleaned it up. Replaced seal. Measured outer o ring to be a -238 size. Installed a new one. Put the parts back together in reverse order. Oiled the pump up and...

You Rock!!!! Just what I needed!!! Thanks a ton!!!

Yes you are correct. I am installing a clutch interupt switch. Wondering where it passes through the firewall

in the process of hooking up my neutral safety switch on my four speed conversion. Does anyone have a picture of the OEM location where the neutral safety switch wire passes through the firewall in it's grommet? I don't see any holes present. I'm assuming I would need to drill one, as my car...

Still avail?

.

Did some brake work. Cleaned, honed, and rebuilt master cylinder with a nice Raybestos kit. Had to clean out fluid that leaked into the booster. Reassembled, just need to bleed it.

Yeah that's for sure. Safe and reliable first. Cosmetics low on the list

Thanks I'm gonna hone the master and install a rebuild kit. Booster looks good still. Gonna give it a shoot

New pushrods are here and installed. Cleaned and reassembled valve train according to the manual. Pre oiled and fired the engine up. It ran great! Set timing and idle mixture. A great evening

Thanks for all the great input. Looking down the valley it appears I have hydraulic lifters. I also think I have J heads. Gonna try and measure old pushrods to see what length they are. There are no spacers between rockers. Is that normal. Do they ride on each other. Will the lifters self...

Woke my engine up after a long slumber. While trying to time it I found the number three cylinder dead. Pulled the rocker box covers and found a broken pushrod on number three intake. Then I noticed all the other pushrods we're not centered In their bore. The last knucklehead installed all the...

Me too.... that's way out of the budget right now. I did not hear any knocks in the engine just a severe lack of power and a mild shake gonna do a compression check this week, once I get one. Hoping I could get some new pushrods installed and be back to where I thought I was.

Well I got it running.... poorly. Eventually I ended up with a dead cyl as I was trying to time it. Pulled the rocker covers to inspect and found an intake pushrod broken and jamming the valve open. Then I started to look at the rockers and they are all installed wrong. In turn all of the...

Seats look great. Need to recover my bench too. What did you do with headrests? Were they redone too? Mine have cracks and I need to switch from green to black in color

Yeah... have the old one out now. Deaf a new sender and pickup. Gotta dump the tank and see if it's salvageable.

Yup, original fe5 black top black interior. Nice combo. Will prob post more than you wanna see lol

Engine hasn't run in a few years. Holley carb was shot, so I installed a less shot loaner edelbrock. fuel tank nasty and removed. Flushed fuel line and installed new filter. Oil and filter changed. Pulled plugs and Dist. Oiled up cyls. Made a preoil rod out of some shop scraps and preoiled the...

In the "shop"! Let the games begin. There is so much wrong, i.e. Terrible work with the 4spd conversion and other bad systems I think I'm gonna remove all the bad to start with a fresher canvas.

A thread to document the revival of a 1972 Demon. 340 auto car with ac. Converted to 4spd by past owner. Car is basically unrestored with some crappy mechanical work done over the years. The goal is to make it a fun driver to enjoy as a "rat" Mopar. Limited money is available right now so a lot...

My unrestored 72 demon 340

I think I saw them both. I had an old blue powerwagon at the time. Can't wait to see your ride!

Toms River. I think I've seen your road runner downtown on a wed night?

Sweet demon! Gives me hope for mine! Hope To see you out at a cruise night one day.

Yeah I've been watching and learning for years. Took awhile to find the right one!

340 4spd