Search results for query: *

I have a 71 swinger. About 2 months ago, when driving at night, the dash lights quit working with headlights on. The dash lights work fine with just the running lights on. I replaced the headlight switch. Still have the same problem. Everything works, running lights, dome light, no dash lights...

I have a nice set of buckets to go in my 71 dart but when I ran the numbers they're out of a 70 charger. Will the tracks work? Or should I use the seats with a-body tracks? Or just get a-body seats? Thanks for the input

Has anyone else had problems with an MSD dizzy? I've used MSD products for years but can't figure out why this dizzy won't work. I have an FiTech fuel injection set up on the car. Shortly before swapping from carb to efi, my car developed a miss mid range to upper rpm. Just like with a bad plug...

Recently I converted my car to a one wire alternator. It's a 71 swinger so it had the newer style regulator. I bought a tuff 1 one wire 100 amp Chrysler alternator from summit racing. I also bought an 8 gauge alternator wire. When I installed the alternator, I also grounded it to the chassis as...

Quick question, has anyone ever used a rear sway bar with SS springs? I'm replacing my torsion bars and adding a front sway bar. I know if I add the rear bar, it will keep the ss spring from having full travel under power. But, I have the light ss springs because of the ride height, not for drag...

Recently there has been a lot of talk on zinc in older engines with flat tappet cams. I found this link on zinc in oils very interesting. http://speedtalk.com/forum/viewtopic.php?f=1&t=35836#p433871 I know a lot of people just put an additive in what ever oil they buy. You might change your mind...

I have a column shift 71 dart Swinger that I have swapped from 904 /6 to 727 sb v8. Does someone out there have a full setup for abody, correct linkage from column to trans for 727? I would like to buy it. Please PM me if you can help. Thank you

Ok, doing a little paint work can't decide what to use. I've looked at DuPont but wow!! My friend tells me to use the chroma base. 1 quart for my eng bay is $190!!! The color of my car is 1971 K6 autumn bronze metallic. Nason is about $160 a gallon. Not near as good of quality and this is base...

I'm installing poly bushing on my ss springs. The kit comes with bushing for the big eye and small. I'm also using the offset mopar shackles. The problem is the large bushing fits the shackle. The small bushing fits the eye. I need the big bushing insert in the small bushing. Anyone ever drill...

My fuel pump quit on my 71 swinger. The pump on the car has a tube that goes from the pump to a vent tube on the carb bowl. New pump just has the inlet and outlet for fuel. Question....do I have to hook this vent tube up? Apparently only 70-71 have this on the pump. Thanks, Russ

I have a 71 swinger with a slant 6. I'm trying to gather my parts before I do the swap to a 408/727 with a dana 60. I know how to measure once everything is in the car but I was wandering if anyone knows the length I need from their own experience. 727 is 4"s longer. I don't know the difference...

I'm posting this and then I have to go out to a family thing. I'll check back in later tonight. I'm swapping from 1 project to another and carrying all my good parts including a dana 60 I narrowed to 47"s. The problem is I don't want to mini tub the new car so the rearend is too short. Has...