Search results for query: *

I may have what you need; however, I live in Northern California and I am not willing to ship the items. I have had too many bad experiences trying to ship large items and it's not worth the hassle to me. So, if you have plans to visit California or know someone in the area willing to buy them...

Hey Guys, I have two front bucket seats (with tracks) from a 1973 Plymouth Duster. The upholstery is worn; however, it is not destroyed and is in usable condition as is. The old upholstery has some splits and should be recovered. A full rebuild should be done for show quality, but I have a new...

1973 Plymouth Duster Parts | MA744253 | 1973 Dart/Duster/Scamp Hardtop Metallic Parchment / Parchment Vinyl Rear Upholstery | Classic Industries Here's a link to an example on the Classic Industries website. Try searching google for 1973 Plymouth Duster split bench seat covers.

Check the Legendary Interiors catalog online. This looks like the same bench seat design I have in my 1972 Plymouth Scamp. Be sure to measure the headrest height before ordering. I think the options were 7" or 9", but it's all described in their catalog. Worst case, call them up and tell them...

Drool on. :-) https://www.hemmings.com/blog/2017/04/13/dodge-introduces-the-2018-challenger-srt-demon-because-too-much-is-never-enough/?refer=news

So what's it going in? Keep the story going, I'm eventually going to do this on my 318 2 bbl, and I'd like to hear what you run into. What carb. are you going load the old LD4B with?

If you're not happy with the slant six and you don't want a street racer, I think TrailBeast made some great recommendations above with a mild 318 (or 360) build. Very reliable, not too bad on gas ( but not as good as a slant six ), parts are accessible and they are easy to work on. You're...

That's one bada$$ looking Duster. Nice selection on the wheels. I don't think it's a stock color, but it looks great.

I understand the LD4Bs are great for 273s/318s if you can find a good one, but if you're going to run a 360, you might want to look for an Edlebrock Performer intake. My understanding is that the port match between a performer and 360 is a little better than with the LD4B. Compare the port...

Don't forget to take your old master cylinder to the parts store when you buy the new one as they usually have a core charge.

I'm not an expert, and maybe they are worth more, but I would guess you could probably get around $20 to $25 per wheel in unrestored condition (6" wide is somewhat narrow in my opinion). There is a cost in time and/or money in restoring them to original condition. Keep in mind that most of these...

My opinion, look for an inexpensive 360/727 combo with low mileage. A stock 318 will give you a little more HP than your slant 6, but a 360 will give you more to work with down the road.

Nice looking Dart. Now get to work and make it the daily driver she's dreaming of.

The P245/60 R14s look great on the rear of a Duster and should clear with no problem. I tried them on a stock 72 Scamp and they were a no-go due to scraping the fender skirts. I only had a 3.5" backspaciing on my 14x7 wheels, so with a little more backspacing, they may have fit. Not sure if a...

Thanks guys, all good inputs. I remember having air shocks on my A Body when I was younger and I do recall the rough ride, especially over speed bumps. Sounds like they haven't changed much over the years.

I'm considering putting some air shocks on the rear of my 1972 Plymouth Scamp to raise it up just a little. Has anyone tried the "Monroe MA704 Max-Air Air Shock Absorber"? If so, any feedback would be appreciated. Also, if you can recommend any other air shocks that will fit a 72 A Body, I would...

Hey BeerBoy, I'm not a suspension expert, but if the existing bushings are dry and cracking, you are probably looking at the original rubber bushings, which would mean they are about 42 years old and should be replaced. Rubber bushings should be fine and are a little less expensive for the...

I have four 14x6" small bolt pattern slot mag wheels. These are driver quality wheels in good shape; however, they are older wheels and do have a few nicks here and there. Could use a little cleanup and polishing to make them shine. Type: Standard 5-Slot Mag Wheels Diameter/Width: 14x6"...

Hey BlueDream, What year is your Dart and what size tires/wheels are you running on the rears?

Hey 68Cuda, I'm in the same boat with my 72 Scamp needing some new tires. I just installed some old slot mags that look great, but the rear tires are just a hair too big (slightly brushing up against the fender skirt on the passenger side). They are old tires, so they probably need to be...

Hey InItSwingIt, I have a few parts you might be interested in including a 74 front disk brake setup and some large bolt pattern ralley center caps. I'm looking for a solid driver A904 transmission for a small block, early to mid-70s vintage. I'm up in the north bay area near Santa...

Understood, it's always on the other side of the country, isn't it? :-))

Hey SFValiant, Have you seen this? 1969 Dodge A-108 Sportsman Van - $4800 (hayward / castro valley) http://sfbay.craigslist.org/eby/cto/4852891187.html Not mine, but I think it's been a Craigslist for a while.

If you happen to be coming out to California, I would be willing to trade your 904 for a small block 727.

Hey CudaGuy, Do you still have these wheels? Would you be interested in a trade for a A-727 TorqueFlite transmission?

Interested in a trade for a 74 dart left fender or 74 dart hood?

Not 100% sure, but I think there is a 1972 340 TX9 Duster in Santa Rosa, California. I can't remember the guys name, but he's probably on this forum somewhere.

I don't know anything about this (just saw it on Craigslist), but here's one up in the San Francisco Bay Area. http://sfbay.craigslist.org/eby/pts/4654710613.html Be careful, it may not be an A Body rear end. Might have been out of a truck or something. Check your measurements.

Good on ya mate! Nice Barracuda.

Hi Jeff, I think you can comfortably mount "235-60-14 tires" on 14x7 or 14x8 sbp wheels. You may be able to go wider, but I think that is the recommended size wheel for the tires you are describing and those should fit well and look good on most A-bodies. You can certainly go wider, but...