Search results for query: *

Clean, mean, 318 machine

Pm sent

The small bolts. Don't know where mine went.

Anybody have the 4 bolts that attach the windage tray to the main cap bolts for a 340? Thanks Joe

I have a set of crane shafts that have no notch. That is why I feel it is more important to know the proper orientation of the oil holes so that the rocker arms are oiled as designed. When setting the oil holes down and to the valves the rockers will be oiled properly as designed no matter where...

I have never installed rocker shafts by where the notches are. They have no function in the oiling system. What is important is that the oiling holes are in the correct location to oil properly. The oil holes need to be pointing down and to the valve tip to oil properly. Your spacers are...

Hi- I have a Holley 80529-1 750 vac. sec. carb, new never bolted on an engine. I am asking $499 plus shipping. Thanks Joe

I have a new PP280 cam that was installed but taken out before the engine was run in favor of a solid. No tappets but asking $75 plus shipping from Ohio. PM me if interested.

Does any body live in or near Brookhaven Pennsylvania just out side of Philly? I want to purchase some small parts from a guy there but he wants pickup only. He wont ship. Anybody near there willing to pick them up and ship them for me? Thanks Joe

welcome from Johnstown, Ohio

Anybody remember the Baccaruda ?

Actually the pcv valve is almost fully closed at idle and high vacuum. The pcv valve is fully open and functioning at wot. When you did your leak down test did you listen at the exhaust, intake, valve covers, and dip stick tube to see where the air was leaking to? If you redid your pcv system...

Just a suggestion but how bout all ties being decided by who has the best reaction time on the posted time slip.

pm me your address and I will send them to you.

Thank You! To all you men and women who served our great country and Welcome Home. US Army 101st Airborne 71-72

I wanted to make one change at a time to the car and post the results. Due to cancer I got a late start and fell way short of my goal for the car this year. Since I already have all the parts my goal in order was: 1 Stock- 17.5 2 Shift kit- 17.3 3 Updated ignition- ? 4 3.90 gear and...

Once again Test/Tune was cancelled due to rain. Today was my last chance to test any improvement from my upgraded ignition. The track is closed for the season so my last time of 17.3 holds. My ignition was factory stock so I installed a mp gold box and pertronix coil I had laying around. The...

318willrun- Go for it. I got my updated ignition in but haven't made it to the track. There are 3 test and tunes left and I plan on making one of them to see what improvement the ignition will make.

Hi- I have a 73 standard bore 340 block with main caps and timing cover. Asking $400. I am in central Ohio. If interested send me a pm. Thanks Joe

Nice! I might have to get a clutch fan. .2 is a good drop.

Rumblefish360- What? No LMAO somewhere in your post. I think you missed a gear. "W. See a little facts here as in how many cc’s the head has and what gasket is will be used." The op can use a thicker gasket to lower compression or a thinner gasket to raise compression. He can also cut the...

Welcome to FABO. The kb399 pistons might be a bit high in compression with the 702 cam. The kb 167 pistons will increase your compression a bit and work better with that cam. As far as the heads a good valve job and some bowl porting is all that's needed. Bigger valves never hurt.

Thanks for taking the time to check your stuff. I need the non adjustable throttle lever like in the picture. I think the rod with the rod and spring is a 60's version. I appreciate your help.

The flat lever with the one piece kickdown rod. I believe this to be the correct setup for a 72-74 340/360

Thanks guys- The link from the carb to the throttle bracket with the slot in it is the non adjustable one. Its a flat piece of steel. The rod from the throttle bracket to the transmission is the single rod without the bell cranks. Do you have one like that 383Scampman? Cope- If I cant find the...

Want to convert from 2 to 4 barrel. Looking for the kickdown linkage/throttle brackets from 72-74 340/360 four barrel - Thanks Joe

Got to the track again last night but failed to make any improvement. I installed a taller air filter to make about a .5" gap between the lid and housing. I also increased the accelerator pump shot. My 60 ft. went down .02 but the car nosed over right when shifting. I thought the transmission...

Got to the track again and made a few runs before it started to rain.. Also got an official weight on the car. The CAT scale at the local truck stop says #3820. Found the rear diff to be a 2.71 instead of 2.76. Installed a transgo 2 shift kit and the new best et. is 17.397. MPH is now 78.90 ...

Finally got to the drag strip tonight to see what my car will do. Its a 73 Satellite, 318, 2.76 rear gear and dual exhaust. The scales were closed so I didn't get a weight but I will go to the truck stop to get that. Ran 17.525 at 78.24 mph. I am guessing 3800 lbs. so my time should be 16.4...

I will buy your kit. Your inbox is full.