Search results for query: *

1) if my cam has a intake valve lift of .500 with a rocker ratio of 1.5:1 , my actual valve lift is .750? 2) if the max valve lift of a cylinder head is .700 I would need to get a cam with around .450 lift with 1.5:1 rockers? or would a cam that has a valve lift of .650 work? 3) do they make...

I cannot seem to get my trunk lid aligned, im hoping its not an issue with the 1/4s or tail panel. the passenger side fits ok, but the driver side is all sorts of fucked up, i can push it down to fit fine without the lock in, but once i put the lock in and have it lock down it sets all wonky...

Came off a 69 Dart could use new ball joints and sand blasted/painted if you want them to look pretty. $90 obo can ship located in Lawrence KS 66049 Photos:

Dusty, but great shape just need cleaned up. $125/pair have two pairs. can ship, located in Lawrence KS 66049. photos:

In great shape, good shape, not perfect can ship located in Lawrence KS 66049 $200 obo Photos: (edit took out like new, they have a couple flaws)

$20 In good shape, no cracks just worn paint. Could use touching up. B5 blue I believe. can ship, located in Lawrence, KS 66049. see photos below. Photos: IMG-3334 IMG-3335

$200, In great shape no cracks, missing teeth, or broken tabs. I might have headlight bezels and fog lights for it too. can ship, located in Lawrence, KS 66049. see photos below. Photos: IMG-3330 IMG-3332 IMG-3333 IMG-3331

$85, in okay condition, cracked in a few spots, and a couple broken teeth. can ship, loacted in Lawrence, KS 66049. See photos below. Photos: IMG-3339 IMG-3336 IMG-3337 IMG-3338

(360 LA)My fuel pump stopped pumping so i took off the timing cover to see what was up and the fuel eccentric was loose and when I took it off to check it out, I found metal shavings all in the back of it. What could the metal be from, and do I need to tear down the engine and clean everything...

I jumped my starter relay to spin the engine over with the starter to prime my oil systems, and after a while I didn't see any oil getting to my rockers. I know I have oil pressure because I forgot to put in the sensor and got oil all over my floor. Do I just need to keep spinning it over some...

I want to put a Tach in my 71 Demon, how should I go about this if there was not one from the factory.

Has anybody put a double din into their A body? could you show pics? thanks!

Overall good shape some TLC and it'll clean up nicely. located in Lawrence, KS 66049. I am willing to ship but you'll pay. $400 obo.

In need of both fenders for a '71 Demon edit I thought70-72 were the same and found out they are not.

I have a 1971 Dodge Demon, it was originally a slant 6, I am putting a 360 from a 1974 Plymouth Duster in it. I have the wiring harnesses from both is there a way I can use one or the other or a combination of the two to make this work? also does anyone have a diagram of the wiring? thank you!

I was wondering if it would be possible to put the guage cluster from the 2018 dodge challenger into my 1974 plymouth duster. What would the wiring be like? would i need different sensors? im not the greatest at electrical stuff.

I am looking at a '74 Duster 360 as a project for me and my grandfather, I'm planning on rebuilding the engine to get some more power. Does anyone have any suggestions on how to get the most power out of the 360? I'm looking at better flowing heads, and carb, a bigger cam, forged pistons and...