Search results for query: *

BME 6.76 rods new. JE mini-dome pistons and pins(solid so can be removed) VGC probably can reuse rings. Std/std 440 crank needs 10/10 clean-up. $1200.

1970 440 block, Bushed and indexed lifter bores. Comes with RB Aluminum caps and studs. Medium fill hardblock. Standard bore. Magged good. $900

Ross pistons for a 572" (4.505borex4.5stroke with a 7.1rod) but can be used for a 540" (4.250strokex6.535rod) They are flat top with a nice valve relief for a typical .800" lift cam and 2.25" intake. They are NEW. For standard type "440-1 heads". Pics to follow with build sheet in AM $600.

Some leftover items from a upgrade. These items ALL have only a handfull of passes (only one tbrake pass)... 1)PG case cut for ultrabell will include 2-piece shield and tailshaft $250 or with GM bell (JW) $400 2)BTE straight cut 1.98 2 year warranty @ 1200hp $750 3)Coan PG turbo spline dual...

Comp Cams 892 series lifters. I have one complete set of lifters and 11 spares and will separate. They ALL have less than 10 passes BUT, I verified the condition 'good' via measurement. Purchased from 3 separate local friends who had engine failure. One set is $350 firm and I'll include the...

A short video my wife has hosted on YT from the last motor combo. I only had the car out a few times for TnT, my best 660ft was low 5.6x but there was a little left in good air with a little experimenting. There are a few other short runs and shake-down hits on there as well.

CFE sheet tunnelram for RB with std port window head 2x4150 pattern. Linkage is included $1500 firm.

I can do some 'packaging' with these parts and other unlisted associated parts not listed depending on your needs. I'm about 25miles North of Detroit, Michigan 48316. 1)Roller cam LSM 4/7 swap NEW 278/290 @ 050 .490/.480 lobe 112 lsa (.730"ish lift with 1.5 rocker)$450 2)Roller cam Lunati NEW...

Here's a friends car that's seldom on the internet. It's evolved quite a bit since we've met. Recently had the paint and body done. It's a 540 with -1 heads with good parts but it's definitly a milder build with reliability in mind. He actually drives it on the street every blue moon. It's run...

Selling some misc 'inventory' that I don't anticipate using in the near future. I do have other related items so, you might inquire with specific needs. 1)Complete minus carb (includes dry sump system, new motor plate, alternator) Craftsman-truck 9.5:1 358" r3/w8 It was rebuilt and then dynoed...

Am I the only one that feels like people are abusing the ads section by posting several individual ads for $10-$40 parts instead of listing them in bulk. How do you contact an administrator about other concerns?

Good core bare block, magged good! crank magged good! With factory caps and MP ductile caps ALL 3 for $350 might seperate local sale preferred. only used for passenger car...GREAT CORE

These are the core parts to build a 511" low-deck. 1)Baked 1971 '230' thick main web block. 2)Used but fresh grind Ohio 4.250" crank std. B main and 2.2 rod. 3)Used JE 4.375" pistons and pins. 4)Used Eagle 6.535 H-beam with new bolts OR Known-used GRP 6.535 HD 'pro' rod. ($1600. FIRM) Can ship...

What do you think is the best bang for the buck using a Mopar for powertrain? I'm not asking about N/A only combo's. Just what have you, or THINK you can build to make respectable power for a good service life on the 'cheap' Let's say anything ABOVE 650HP...GO

Good core bare block, magged good! crank magged good! and MP ductile caps ALL 3 for $350 might seperate local sale preferred. only used for passenger car

Selling my fresh motor with NO 1320ft hits, less than 8 660ft passes. Good sonic ck and part fill 400 blk, (I have about $2500 into block alone.) alloy caps and bushed lifter bores. 4.0" Crower light crank $$$ with 2.1 BME rods. Custom gas-port Diamond dish pistons 11:1 comp. 1950 bobweight...

These are the core parts to build a 511" low-deck. 1)Baked 1971 '230' thick main web block. 2)Used but fresh grind Ohio 4.250" crank std. B main and 2.2 rod. 3)Used JE 4.375" pistons and pins. 4)Used Eagle 6.535 H-beam with new bolts OR Known-used GRP 6.535 HD 'pro' rod. ($1600. FIRM) I will not...

Hello, I figured I'll try this site out since the other one seems slow. I have a 1968 Valiant with a home built low-deck. So far I have been 5.6's @ 121 in the 1/8th on the motor. I'll be poking around here when time permits.