Search results for query: *

Part # 38702 12 Lmk if u have one to sell. Thanks bruce

I have a 68 fish. I need the seat belt that goes along the headliner that clips into the buckle located by the sun visor. Its for the drivers side. I need it in black. zip is 95431. thanks bruce

hey everyone hope your all doing well. i have a situation where my 68 fish with a 340/727 dies in gear at idle, when i'm at a stop sign/red light after about 5-7 seconds. a friend of mine says it might be the gas in the carb vaporizing from the heat from manifold. he says i might need a...

i need an allen set screw for my gear shift knob in my 68 fish. some members suggested going to the hardware store to find one no luck. i tried contacting some fabo members to see if they had any zero. so if anybody has a set screw they want to sell LMK. thanks bruce

just up graded my 68 fish to the 73 disc set up and proportioning valve (PV). a friend of mine said the brake light is on probably because the needle in the PV moving to the rear brakes due to starting the bleeding process with the furthest rear brake and pushing the brake pedal to hard/fast...

ok I know its the little things in life that we all want. so hopefully everyone gets a kick from this. I need the little screw? that tightens the shifter knob to the shaft. where do I get one or does anyone know what type of screw it is so I can see if the hardware store has one. thank and...

what's everybody doing about insuring your cars? I called haggerty and got a quote for $249/yr for a 18k guaranteed replacement for a 68 notch fish. is this good or not? anybody have bad blood with haggerty? any advice will be appreciated

i have a 600cfm eddie carb that has an electric choke. wondering the best place to wire it to. i was told to the positve side of the coil or battery side of the alternator? is one better then then the other or is there a better way. thanks

i have a 68 barracuda which had a /6 and i converted it to a 340 with a edelbrock rpm air gap intake on it. the /6 throttle cable is to long. does anyone know if a factory 24 inch cable would work? thanks as always. bruce

hey mopar fans getting ready to install my new m & h wiring harness that has been updated and modified for electronic ignition and wanted your guidance. the car is a 68 fish with a 340 and 727. 1- should i put the electrical grease on the bulk head plugs that attach to the fire wall? and where...

ready to buy my electrical parts for the new wiring harness. my question is which ones to buy. i have the following parts already. Year one reprodution wiring harness modified for electronic ignition part #HU228AM. IT states to use 70 and later alt and voltage regulator Prestolite electronic...

hello everyone, what i need is detailed pictures of where to mount/postion the proportioning valve(PV) pictured here and how to run/where the brake lines go into the PV on a 68 barracuda with the 73-76 disc brake upgrade. as always thanks in advance. bruce

do i need to buy a new tranny mount and dust shield for my 727 or will the 904 tranny mount and dust shield work? thanks bruce

okay i have a 68 fish that i am converting over to 73-76 disc brakes. my ? is looking at my proportiong valve(pv) that is for an A body 69-74 with disc brakes and drum rear it dosen't look like it will set up correctly. meaning where the pv is mounted on the 68 it dosen't line up with the brake...

anyone have a 7 blade mechanical fan for a 340 engine to install on a 68 barracuda with a 22 inch radiator that your not gonna use. send me a picture and price thanks bruce

its been a frustrating weekend for me. i could not take my drivers side grill off my 68 barracuda due to the nuts on the back of the stud kept on spinning. i broke 1 of the studs off but other nuts were spinning and not coming off. my question is can i somehow reattach the studs with jb weld or...

ok decided to go with year one/classic industries wiring harness that is wired for a mopar ignition. here's the question which ignition is the most dependable reliable one. my car is a 68 barracuda with a mild 340. car will be a street car. i see ignitions by firecore, petronix etc. plus orange...

:blob:replacing the factory engine wiring harness, who has the best product? also changing from points to electronic ignition do i still want to order an original 68 wiring harness or a different year with electronic ignition? thanks for all your expertise advice. b

i have a complete 68 drive line for sale. only has 89k orig. miles 225 /6 complete from air cleaner to oil pan to alt to distrubitor. 904 tranny and 7.25 rear. $500 for complete drive line also have gas tank, $25 leaf springs, free newer looking radiator, $25 master cylinder, free manual...

getting ready to install my aluminum intake and was wondering if anybody tried spraying clear coat on it. how did it came out and more important what does it look like today. i've read it turns the aluminum yellow? as always i appreciate all the great info. thanks

hey guys, I have a 340 with about 15k miles on it. it was built to stock specs. my ? is if I wanted to install a aluminum intake and cam what would you guys recommend? I have a 600 cfm edelbrock carb w elec choke 2400 stall 727 3.55 8 3/4 rear it is a street drive car and would like to add more...

what rust inhibitor are you using and where can i get it? thanks for the help. b

getting ready to rebuild my front end and wanted to know if I could order moog parts for a 73-76 design for my 68 barracuda. will this work?. have a manual gear box. ordered the 73 disc brake conversion. thanks for the help. idler arm bushing k7049 pitman arm k7075 tie rod end ES401 R (2)...

here's my choice i've purchased a new gas tank, 3/8 fuel line to carb and 3/8 sending unit for a 408 stroker. came across a good deal on a stock 340. i know the 340 has a 5/16 fuel line. since i got the new 3/8 parts would you install it anyway? thanks for the advice. bruce

happy and safe 4th to all. anyone have the latest coupons thanks bruce

whats up mopar fanatics I saw an add for a 340 for sale. I wanted you guys input on this motor. Here are some specs: .040 on the cylinders .010 on the mains .020 on the rods the add says running motor but won't smog, its in a truck now but says it came from a 70 cuda. 11-20-69 casting on the...

hey everyone need 15 inch wheels with the LBP for rollers. if they have tires that hold air that is a plus. located in northern ca. bay area. thanks bruce go giants

hey eveyone, up grading my front brakes to disc and need spindles from a 10 inch drums. i have 9 inch. any help would be appreciated. thanks b has anyone used magnum force 2 inch drop spindles? would it throw camber/caster off? i plan on using the hotchkis sport suspension and it says it will...

hey eveyone, up grading my front brakes to disc and need spindles from a 10 inch drums. i have 9 inch. any help would be appreciated. thanks b has anyone used magnum force 2 inch drop spindles? would it throw camber/caster off? i plan on using the hotchkis sport suspension and it says it will...

hey fellow A bodiers. i've started my 68 barracuda rebuild. p/u my rebuilt 727 w 2400 stall and 8 3/4 rebuilt w 3.55 sg yesterday. what a great day. thinking about installing a 408 stroker. want to use an aluminum radiator and aluminum fan shroud. what brand would you use and where is the best...