Search results for query: *

  • Users: vje55
  • Content: Threads
  • Order by date
  1. V

    [WANTED] WTB 48mm Webers

    Hey all, I am after 3 x 48mm DCO (E or SP) Webers, any leads appreciated. Brian Queensland Australia
  3. V

    oil leak A833

    Hey all, I have an 833 which is leaking oil from the reverse lever shaft on the box, I guess this means the box comes out? Any ideas what is involved? What type of seal? etc. thanks. Brian Down Under!
  4. V

    D66 Carbs?

    I am thinking a pair of Eddy 600 1404's set up for jetted for dual quad operation on the D66 for my 408, I had the manifold flowed at 498hp,carbs are these in fact: http://www.ebay.com/itm/350921094019?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 as I have a mate here with 500's on his...
  5. V

    Carter 4131S carbs

    I can get hold of a pair of rebuilt 4131S Carter AFB's (575CFM) for the right price, how would they go on a D66 Edelbrock dual quad manifold for my 408 stroker? I know there are better stuff around just like the dual quads look, thanks Brian:iconbigg:
  6. V

    Carter 4131S carbs

    I can get hold of a pair of rebuilt 4131S Carter AFB's (575CFM) for the right price, how would they go on a D66 Edelbrock dual quad manifold for my 408 stroker? I know there are better stuff around just like the dual quads look, thanks Brian:D
  8. V

    [WANTED] 8 3/4" 742 diff

    I am after a 742 8 3/4" diff, preferably complete or housing and axles, LBP (4 1/2") to suit 69 Dart, am in Australia but buy in the US constantly, so shipping not an issue I hope.:D Brian
  9. V

    [WANTED] 2x Edelbrock/Carter 500cfm Carbs

    After 2 Eddie/Carter 500cfm carbs, any condition, thanks Brian
  10. V

    [WANTED] Wanted

    2x Edelbrock / Carter 500cfm carbs, any condition, thanks Brian
  11. V

    What make are these roller lifters?

    I am wondering if anyone can tell me the make etc. of the solid roller lifters I have?
  12. V

    WTB Edelbrock D66 manifold

    Want to buy a D66 dual quad manifold mopar SB, I am in Australia, upside down,,,,,,,,,,,,,,,,apparently! Thanks Brian
  14. V

    WTB Edelbrock D66 manifold

    D66 manifold wanted to buy Brian Queensland
  15. V

    WTB H Beam 360 Rods

    Am after 360 H Beam rods, used but in GC is OK, Thanks. Brian Queensland Australia
  16. V

    WTB Edelbrock D66 manifold

    Looking for an Edelbrock D66 dual quad barrel manifold, any help appreciated. Brian Queensland Australia
  17. V

    WTB: D66 dual quad Manifold

    Am chasing a D66 for a SB, any help appreciated. Brian Australia
  18. V

    WTB Edelbrock D66 manifold

    Am chasing a D66 for a SB, any help appreciated. Brian Australia
  20. V

    WTB 2x 750 carbs

    Am chasing 2 750 Edelbrock or Carter carbs.
  21. V

    WTB twin carbs

    I am after a pair of carbs for my tunnel ram going onto a 408 stroker, linkages too would be awesome, Thanks Brian Queensland
  22. V

    WTB: SB H beam rods

    I am after SB mopar H beam rods, used or new please. Brian
  23. V

    SB 360 solid cam wanted

    guys, I am after a solid cam for my 408 build, used or dyno time only ok, hoping for around 580ish lift on 1.6 rockers, 254-264ish @50. I am in Australia so ifn you might have one also need you to ship to Oz for me. Brian
  24. V

    Australian Mopar

    This is my 1972 Valiant Charger 770, 318/4 speed...............who said stock stroke 318's don't sound tough? 302 Found :happy1:
  26. V

    Retro roller 360

    Hey all, I know that a lot of this stuff has been thrown around, I am building a 360 stroker, thinking about using a BPE 4.125 crank, what is the tried and proven retro fitting mechanical roller cam and drop in roller lifters, looking for about 600 - 620 lift? I am from down...
  27. V

    Milling Eddy 6077 heads

    Anyone know how many thou per 1 point of compression when it come to machining these heads? I know the J heads are 5 thou per point, just don't know about the eddy's. eg: eddy's I have are now 64cc, want them at 58cc. Brian
  28. V

    WTB:340 TRW Pistons

    After a set of TRW L2316 (I think) 340 pistons, 4.080, any help appreciated. I live 'down under' but happy to pay for the ride etc. Brian
  29. V

    Roller cam & lifters Victor Jr/M1

    Guys, after a retro fit roller cam &lifters, Victor Jr or M1 inlet for 360. Thanks Brian p.s. will pay ride if you don't mind sending it to good ol Oz......
  30. V

    360 Compression?

    Guys, have a set of sealed power 2380P forgies, I think the comp ht is 1.591??? If so any ideas on how far down the hole in a 360 they will be the block is std deck height rods 6.123,,,,,any ideas appreciated????
  32. V

    273 adjustable with roller cam?

    Has anyone used the 273 adjustable rocker gear with a solid roller cam? I have a 340 flat tappet, smog heads ported 2.05/1.60 with 273 adjustable rockers, TRW etc. Can I use all this with a solid roller cam? I know that I will have to get new pushrods, but has anyone done this? Can I buy the...
  33. V

    69 cuda fastback 383

    Guys, I am thinking of buying a 69 fastback Cuda, originally a slant column auto, now mild 383/727 stage 2 kit/8.75. Paint is shmick panther pink, my question,,,,,,,,,,,how much? I am in Oz (Australia) import to here is $10K ready for registration, car in here already. Brian
  34. V

    WTB - Weiand hi ram

    Guys I am after a Weiand hi ram 1995 SB manifold, I am in Australia an d will pay any postal fees gladly.
  35. V

    Wanted: Weiand 1995 Manifold

    I am after a Weiand 1995 Hi Ram manifold, Actually after just the bottom runner bit (Weiand 5995), I live in Queensland Australia and am happy to foot the bill for postage. Thanks Brian
  36. V

    060 off top TRW piston?

    Guys, I need to skim 060 thou off the top of my old school TRW's, I believe it should be OK but after some thoughts? They are currently out of the hole 060 and with my head CC it is to much compression. BJ
Back
Top