Search results for query: *

Hi there! Will my stock 69 air conditioning work with an air Gap manifold? E.g Is the mounting provisions provided? Thanks! Dave

I have popped a head gasket on my 360(coolant leaking out side of block only) Can I get away with replacing my .040 thick gaskets with a .028 thick to gain compression without any valvetrain problems? Ratio now is 9.55-1 and have stock non adjustable valve train. Also is it normal for a gasket...

I have a Holley 3310 carb. there is a provision (port)for brake vacuum,but nothing for the pcv valve. I have my brakes hooked directly to the manifold. Can I hook my pcv line to the carb brake booster port? Or where should it go? Thanks! Dave

Will an Eddy Air gap intake with holley carb on a 360 fit under the hood on my 69 dart??? It looks like it will be awful close! Thanks! Dave

So the flexplate makes up for the imbalance in the external balnce 360 not the converter? Dave

Mine has 6 threaded holes,1 unthreaded and a notch. Indeed a 6 bolt crank. I think I need a b&m 10239 flexplate if i keep my stock converter. What if i use an aftermarket converter? Is a 69 904 converter neutral balanced or weighted? Are most aftermarket converters neutral or will i have to add...

If I use a b&M Non neutral flexplate and a neutral convertor I am set then correct? Just want to be positive before putting this all back together Dave

I am not sure if it is the stock cast crank. I will see if the 7th hole is drilled tomorrow... Thanks! Dave

It definately has 7 threaded holes and a machined notch where the eighth would be. Now I am confused... Dave

I have a rebuilt 360 non magnum. It was balanced and has stock balancer to the best of my knowledge. It was in front of a 4 speed and now I want to run an auto. The crank has 7 holes plus a notch.(8 hole?) I want to run a new converter on my stock 904 tranny. What do i need to make this work? Is...

The flywheel was not included. The engine was balanced at the machine shop. The harmonic balancer appears stock and has a few small holes set into the edge of it. The engine was infront of a 4 speed before and I am ging to use an auto. Dave

How can I check to be sure the engine is internally or externally balanced to be sure? I understand that a 360 can be made "neutral" balanced. Just a bit confused. Thanks! Dave

I have just bought a 360 which was in a 4 speed car. What do I need to hook up to my 904 transmission? I am concerned about an imbalance because the 360 is an external balance,where my 273 was internal. I am planning on replacing the torque converter as well. Thanks! Dave

Mine is a d code as well... Dave

I pulled the carb off and the gasket was stopping the 4 barrels from opening... Now much better,but bogs a bit.. I will replace the carb with one with vac. secondaries.. Thanks! Dave

I have a 1969 dart with a 273 engine It has a 4 barrel carb mechanical secondaries. The secondaries don't seem to open. Was the original manifold a 2 barrel? With a edelbrock air gap for a 318-340 fit? I will eventually replace the engine with a 340 and want to be able to reuse the manifold if...