Search results for query: *

Looking for a front & rear bumper for my 69 Dart Swinger * NOS or a set of real nice rechromed * Must be willing to ship & accept Paypal * I know they will be pricey & I don't nickel or dime people. Contact Dan Please figure in the shipping to 12590 * Thank You

Thanks very much. Do you have a contact number for your friend with the A-body BB manfolds ? And a name. Or if you would please, you can have him call me anytime 845-546-5523. Dan in NY 12590

I know this is an old tread - but I would appreicate anyone who could point me in the right direction or has a set they are willing part with. Left side 2899002 Right side 2806900 Thank you Dan in New York 12590 845-546-5523

Hello FABO Community: I need an antenna delete plug for my 69 Swinger. Also I need 4 Dog Dish hub caps for the same car. The hub caps must be very good to excellent in condition. I don't mind paying a reasonable price for either or shipping. If you have either you are willing to part...

Hello All: The Young Gun I sold the 74 Dart Swinger to is looking for a rear bumper. It has to be straight & the chrome has to be decent. He also request it be within 50 - 75 miles from 12601 in New York for pick up. Going to college & working at Sonic doesn't leave him much extra spending loot...

I also have a 440 out of a mobile home - 1976 with 46,000 miles * I'm asking $650.00 you pickup * I'm located in Poughkeepsie NY 12601 * There's a guy local says he want's it - he heard it run before I pulled it - but haven't seen any money yet * He snoozes - he looses.

Wireweld is correct - Promax does make a base plate with angle fuel mixture adjustment screws for the model 2300 * It runs $175.00

That's the exact same cam in my engine * MP 484 / 484 lift 284 duration * pn# 4120231 * I run 35 degree total timing * It idle nice right around 1,000 rpm's - Dan

There reproducing them now for $379.00 a pair plus shipping * My buddy just purchased a pair from Tamraz's & they were quite nice * Check out Ebay item # 360164797168 if you're interested * Dan

Hello * I purchase my Six Pack last year from Herb's Restoration Parts * It came with everything needed to install - even a new throttle cable & coil bracket * It was a little over 2k with shipping * Very nice people & very fast shipping. One other thing I can tell you is - if you're running a...

If anyone else needs a under-drive alternator pulley feel free to PM me. It's "Free" just pay shipping - Dan

Hey Mark - I found one corner piece - Look like one you need? PM me - Dan

Don't laugh - but my buddy used defroster hoses made for a 1965 - 66 Mustang * He got them from Mustang Unlimited & if I remember correctly they were cheap. In fact - I think I have a brand new set still in the box. PM me if you want - anyway I can help - Dan

This might help you out * About 4 years ago I needed front & rear lock-strip moldings for my 67 notch-back. What I used was - lock strip moldings for the Dodge PU. I believe it was 1992 or there abouts. I was able to puchase it new right from my local Dodge Dealership. It came in 25ft roll...

I sent you a PM - let me know if you still need one. Dan

ABS ??? or AVS ???

I'm pretty sure I can help you out. I live in Fishkill,NY & I have a restoration shop in Poughkeepsie,NY - I know I have a bunch of old adj. BB rockers. Give me a call at the shop Mon-Fri 8am - 4 pm. Dan 845-473-9300 Dream Car Automotive

I have "1" (passenger side) $20.00 plus shipping (cream color) from a 73 Dart Sport - I accept paypal - 845-546-5523

Thanks very much - if anyone has or know where I can buy the collage seen in the acticle please contact me asap.It will be greatly appreciated.

Hello All : I am looking for any information (old acticles-advertisement) pertaining to Mr.Norm Grand Spaulding Dodge & the super-charged 1973 Dodge Dart Sports that he built. I have found quite a few acticles pertaining to the 1971 & 72 Demons both with Six Packs & Super-Chargers. I did find...

Many thanks to all the replied to my listing.Special thanks to allaboutabodies who had a very nice pair of 1969-340 exhaust manifolds he's been sitting on for 30 years & his very reasonable price.Signed 1Dart2NV

Thanks for the heads up. I checked them out on the Accurate site & they do really look good.For $650 plus shipping I think I'm going to keep looking for a pair of originals.Even if I can save $100-200 that'll pay for the repo gaskets at $179.00

Thanks guys - I also saw them in the Collectors Guide.Has anyone used them yet? I bought a pair of Ram-Horn repops for a Max Wedge clone I built two years ago & the fit was chit - they wouldn't even bolt up correctly to the head.Plus it was such a hassle get my money back.

"I'm in the market for factory 1968-70 340 exhaust manifolds for an A-body. I know they a pricey,but I'm willing to pay the big $$$. They must be in super nice to mint in condition. Email me direct with detailed pictures of what you have. [email protected] Thanks

For sale is a pair of brand new reproduction inner fender wells for A-bodies. These are 1/2 panel units "NOT FULL" inners.They go from just above the shocks to the fender.Great replacement for cars where rust has eaten away fender mounting area.All holes are already pre-drilled. $150.00 for the...

Hello: I don't know if you purchased the other trim rings or not,but if you didn't,I have a mint set of OEM brush finish trim rings for $150 plus shipping. Pictures available.Email me direct at [email protected] Dan

Hello: I have just the carburetor for you. Brand new Rodchester Quad-jet. I bought it from Jet it's a Stage II. I had Carb Shop tweak it even more to the tune of 855 cfm. I got $600 into it,but with holidays coming will take $275 plus shipping.Yes pictures are available.Email me direct...

Hello: I have a pair of new reproduction inner A-body fender wells. These are only the upper half where they bolt on to the fenders. Unfortunately,I haven't found anyone yet who makes full ones. If you're interested there $200 I could send you pictures.I live in New York so shipping won't cost...