Search results for query: *

  1. 318MoparGuy

    Hood Pin Lanyard Length

    Hey 69GT, I just went out to measure the lanyard length on my 73 Dart and yes 23” is the correct length. Have a good one!!! 318MG
  2. 318MoparGuy

    73 Dart - How to install DMT hood to cowl and hood to rad support seals

    Thanks DartGTDan...I really appreciate the pictures, they will definitely help me install it correctly. DMT gave me plastic clips as they said they are period correct...hope they do the job! Thanks again for your help.... 318MG
  3. 318MoparGuy

    73 Dart - How to install DMT hood to cowl and hood to rad support seals

    Hi All, As mentioned in the title I purchased new seals from DMT. I looked through both parts of my 73 FSM and was not able to find a section on how to orient and install the seals correctly. Any members with 73 Darts that have installed new seals? Pictures and advice would be greatly...
  4. 318MoparGuy

    Autobody guy on longisland

    It’s across the street from Veterans Memorial Pool...white garage building on corner. IIRC it was the same owner last name ending in “ski” ( Polish)...small family run business. Give them a call...
  5. 318MoparGuy

    1969 dart ready for paint....yellow looks wrong?

    Agepag, If your dad can find out what color code that car is painted in, then that’s what he should paint the car in...definitely brighter than D2 but looks real nice.
  6. 318MoparGuy

    1969 dart ready for paint....yellow looks wrong?

    That does look nice too
  7. 318MoparGuy

    1969 dart ready for paint....yellow looks wrong?

    Show him some Y5 color cards next to the D2 cards and he’ll see what a fuller nicer color yellow the Y5 is and will look beautiful on his car.
  8. 318MoparGuy

    1969 dart ready for paint....yellow looks wrong?

    Agepag, Check out my avatar...my 73 Swinger is painted in a 1974 color...Y5 Blaze Yellow and it looks real nice. I see lots of chevys in their yellow, but to me it’s a banana yellow.... too bright...just my thoughts and good luck. 318MG
  9. 318MoparGuy

    73 Challenger R/T bumper jack, lug wrench,spring and stand base interchangibility

    Tried to pm you but system wouldn't allow me to... My address is Gregory Bange 88 Gordon Drive Waynesville, NC 28786 When I see him, I will make sure he gets it... thanks for helping out and thanks also to all that responded. 318MG
  10. 318MoparGuy

    73 Challenger R/T bumper jack, lug wrench,spring and stand base interchangibility

    Hi Alaskan_TA, I will pm you with my address... thank you.
  11. 318MoparGuy

    73 Challenger R/T bumper jack, lug wrench,spring and stand base interchangibility

    Hi All, I didn't really know where to put this thread Mods, please move it if it needs to be moved. Went to car show in Maggie Valley, NC today and had a great time. A 73 Challenger R/T parked next to my 73 Dart Swinger. The owner and I had a nice chat and it turns out when he bought the car, he...
  12. 318MoparGuy

    any tips on cleaning out the cowl?

    I read the posts on cleaning out the cowl debris, but I can't find the air boxes with the handle to open up on my 73 A/C Dart to get to cleanout areas. Am I looking in the wrong area under the dash or is the underdash venting setup different on a 73 Dart? Always enjoy gaining knowledge reading...
  13. 318MoparGuy

    any tips on cleaning out the cowl?

    Thanks Rocky for the info...PO (original owner) had it in the garage most of the time as the black dash pad, door panels and really the whole interior is in perfect condition except for the new carpet. People at the car shows are always amazed when they look at the inside. So I am hoping it just...
  14. 318MoparGuy

    any tips on cleaning out the cowl?

    Thanks Rocky JS for the pics....I saw those but didn't realize they were the drain holes. When you flushed it out with water at the end of cleaning, did you just flush from the top of the cowl by the wipers or from somewhere else....Thanks again for your help.
  15. 318MoparGuy

    any tips on cleaning out the cowl?

    Rocky JS...do you or anyone else have a picture of the location of the side drain holes location on my 73 Dart? I looked all around the cowl area and can't find them. I want to see where they are so when I remove the heater box and driver side air box then I will know what area to work towards...
  16. 318MoparGuy

    Any sources for 1974 Y5 (Yellow Blaze) touchup paint?

    Hi All, Need to touch up some tiny areas on my 73 Swinger. Is there anyplace that I can get a touchup bottle/tube of 1974 Y5 - Yellow Blaze? Just need a little....anyone have any to share perchance? Thanks, Greg
  17. 318MoparGuy

    What paint to use for tail lights

    Hi Todd, I have a 73 Dart Swinger with 71 bumpers and just recently repainted all the silver trim on the tail lights. I researched it and ended up going to a hobby store. I used Model Master -Silver Chrome Trim #2734 (enamel paint) and it cost around $5.00. It has already been out in the rain...
  18. 318MoparGuy

    License Plate light housing?

    If you are still looking for one, send a PM to whitepunkonnitro.....that's where I got mine and in very good shape. Good guy....
  19. 318MoparGuy

    Need help locating items to be removed for W/W pivot arms replacement

    Ok...thanks....will be doing it soon...
  20. 318MoparGuy

    Rear license plate light holder/ mounting bracket for 1973 Dart Swinger?

    Hi All, Just noticed that I need a rear license plate light holder/bracket held by two screws...anyone have a spare or can tell me where to get one for my 73 Dart? Thanks, Greg
  21. 318MoparGuy

    Need help locating items to be removed for W/W pivot arms replacement

    Thanks Rocky JS for the photo....WOW I wish the dash wasn't there as it looks real easy to do without all the stuff there on my A/C car...question....where is the heater box and heater core box located as I will have to remove those to make the job a little easier...and easiest way to remove...
  22. 318MoparGuy

    Need help locating items to be removed for W/W pivot arms replacement

    Hi All, I will be tackling the wiper pivot/bushings replacement job soon on my 73 Dart A/C car. Does anyone have photos of the items that I will need to remove under the dash to get this job done correctly? This is my first job on the car (as I recently purchased it) and can use any and all help...
  23. 318MoparGuy

    Words of wisdom for this operation?

    Hi All, What do I need to remove under the dash to remove the wiper pivot arms in my 73 Dart A/C car. I need to install new wiper pivot seals and bushings kits. How should I approach this "operation"? Any words of wisdom will certainly be appreciated...Thanks, Greg
  24. 318MoparGuy

    How to fix LH remote mirror on 73 Dart Swinger?

    Hi Mike, As per my previous post...is your cable 32"long and are you willing to sell it separately...Thanks, Greg
  25. 318MoparGuy

    How to fix LH remote mirror on 73 Dart Swinger?

    What's the easiest way to remove the door panel as I would like to keep from breaking anything (clips,etc)? Thanks for your help :cheers: Greg
  26. 318MoparGuy

    How to fix LH remote mirror on 73 Dart Swinger?

    Thanks Mike...it seems by reading threads that I need the 32" cable (correct me if I am wrong) as I have a 73 Dart Swinger 2DR hardtop (no vent window)..is that what you have? and if it is... are you just selling the cable as my mirror and base/bowl are in real good shape. I just ordered a wiper...
  27. 318MoparGuy

    How to fix LH remote mirror on 73 Dart Swinger?

    When you say "take it out"...Can you do this by removing the mirror only or do you have to remove the door panel? Thanks....
  28. 318MoparGuy

    How to fix LH remote mirror on 73 Dart Swinger?

    Hi All, Just purchased a 73 Dart Swinger and found out the LH remote mirror is not operating....what's involved to get it operational again? Appreciate any help on this subject. Thanks in advance... Greg
Back
Top