Search results for query: *

got 2 choose on if you want too. look in the other post you were replying to.

ahhhh gotcha, thanks, so I seem to have all 5 pieces (2 front trim and 2 rear larger corners, latch cover) I need for the inner trim. correct? Like I said It's been 10 years and I never messed with it when I had it since they were perfect (and my memory isn't).

looking for a part or 2 depending on the actual remaining parts needed for the rear inside of a 65-66 barracuda. (no, I haven't had one in 10 years and forgot what I did know about the trim in that area since mine was perfect when I had it and won't get my new to me one till next year(he said so...

okay folks, Thanks to all you kind people helping me out I've got some parts coming my way hopefully and then ON to the scanning and cutting the profile for the parts ... where did I hide that long flat piece of 1" aluminum stock, hmmmmm gotta find that one now.:)

dang okay, yours also would work what model so I can compare the one with the other set, Hopefully they are all the same but I've been fooled before with different vendors making these parts, (and yeah I was one of those vendors back in 67-69 right before I went to work for chryslers) I'll pm you

cool I'm game shipping to 33597 and I'll reserve a special set for you when they are done I'll PM you with the address and find a way to pay you

hmm isn't there a bend on the front side? someone told me there was. if not then,YEP, just one is all I'd need. The profile shape,dimensions and hole locations are what I'm mostly interested in to recreate a mold for a custom engraved one like I do for the 63-66 early A's then I'd have to...

I'm looking for a set of all there but not perfect sill plates that I can get a scan from time make a press mold from, they don't have to be perfect just all there and straight

om sent THANKS. I'll send ya a new set as soon as I can get em made too!

I'm looking for these 2 rear window trim pieces in this picture. I'm trying to make a mold of them so I can reproduce these and the 2 bigger pieces for the barracudas. I have to 2 lower pieces(well most of them and have a mold 90% done for those part but I'd like to make it a set of all 4)...

oops replied in the "well this sucks post. I think I have one in the 66 dart 4 door parts car.

Nah, Thanks that's okay. I'll rip apart the 2 extra drivers side ones and graft the passengers heater box door opening into the drivers side box. 600. is wayyyyyy to steep for me to just tear up and never use.

Thanks, I don't need NOS since I'm going to tear it apart and re-create it using ABS for all the parts. I'll probably take the heater unit and the drivers side rounded part to make the mold if they are that rare. No sense in destroying a NOS piece someone else can use. thanks.

I"m looking to expand my parts list (since I"m on lock down for the forseeable future:() and need at least a good passengers side heater delete fresh air box for the 63-66 models that I can tear apart for a model and probably the later ones as well. Door that are broke with all the pieces...

that same part was (the corners) on my 64 GT convertible that I had and my 3 65's I kept upgrading that corner piece till I hit the 67 car and let it go with the 66 GT, then traded the 67 for another 66 (who'd a thunk) I guess I like 66's.

there is a rechromed set on ebay right now $$$$$$$$ 64-5 and 6 fits dart only but I think it's not the gt ends those look like lower trim level tips for the non GT. the corner pieces will still work though. Valiant stuff is totally different. Mopar Convertible Top Well Opening Chrome Trim...

convertible are different than Hardtops. I had to make a set for my car since it didn't have any. They turned out pretty good even though they were softer than I wanted them here is the mold I made for the replacements Convertible on the bottom and hardtop on the top shows off the...

Glove box light assemble for a 63-66 dart or valiant. yep, want one or 2 to test (also for my 66 dart) so I can make my glove box liners fit and work correctly

Nice car to start with. interesting color as others have said. How bout some kickpanels after you get your new door panels? hmm upside down? hmm upside down, but they do clear the fresh air door. and if your dimmer switch is at leasty 3.5 inches away from the side wall you won't have to...

I just got a 24 or 25 inch wiper blade and(cut it in half so I have 2 fer 1) replace the rubber part of it for my early 62 toad. I do the same thing for my RV that requires $60.00 blades. I'd Grab a set of the correct (24 or 25 inch)length blades and look for winter style since they are a bit...

and if reed doesn't get it I'd be happy to purchase it. so consider me 3rd in line!

okay is the navy blue one sold? if not I'd like it.

I'm looking for a 64-66 Plymouth Dash (any color will work) pad in good shape to make some molds from, the better shape the easier it will be for me.. thanks pm me with pic's of the pads.

Dang any one else have a nice one like the black one? I need to get a good one to take a mold from so I can start making replacement pads for the Plymouths. I already have good Dart one that I'll be casting a mold from this winter.

I have a 4 door dart parts car that might just have 2 good front doors. let me check and get you some pic's.

thanks . but I need a 76 and up 225 slant timing cover tab. mine went mia somehow. Aghhh I was just informed that the timing tab was welded on 78 and down /6's I relooked up my numbers and the last 4 on the block in chrysler 10.000 day format was March 02th 1978.. so I might have the later 79...

thanks , but I think I need a cast crank style timing tab. My 66 timing cover is different than the 78 one.

the engine numbers are 8 w 225 6079 . sooo I'm assuming it's a 68 (could it be a 78 since it's not red) 225 solid lifter block I need the timing tab that goes on the front timing chain cover

I don't even have a good photo to do them or I would attempt it. plus my top frame is off the car right now getting cleaned up and painted. thanks I'm in ("maybe" since he has not replied to my conversation reply) a private conversation with the member and am awaiting on a response of he has...

still looking for one