Search results for query: *

Thats what I thought. No wonder it wasn't sealing. To make matters worse TTi headers and a 727 Trans out of o truck there is a tap that doesn't allow you to get a socket on the nuetral safety switch. Thanks for the input.

My nss has been leaking for some time. I decided to tackle it today when I took it out I noticed there were two gaskets. Should there be two or did the tranny shop leave the old one? Any tips before I go to the store to get the things I need.

Glad to hear it.

Let us know.

I am no pro on this and after a head injury I forgot alot of things. Make sure you have the right cable for the year because there are different ones. If you have the right cable and you know you installed it right in the dash then the cable is not properly indexed into the transmission. This...

I am going to measure that piece tomorrow. For now I turned the linkage upside down from the way I had it. Adjusting bolt on top and cotter pins to the ground. It now clears the nuetral safety switch.Did I have it mounted wrong to begin with?

Redfish, The transmission is out of a truck. I had a complete rebuild and changed the tail shaft etc. Is there any difference between car and truck 727? I had to switch from a 1 pin to 3 pin nuetral safety switch. Any ideas?

Here's a pic.

Any ideas???

I have gone to Transmission Exchange. It is a chain rebuild shop. Try to go to your local tranny rebuild shop and they might have what you need.

I put new arms on tonight. The problem is that with the nuetral safety switch in the shifter rod is binding up against it. I have the adjustment on the rod itself the type that slides up and down the rod like a 70 model. The adjuster is not on the shifter rod that comes through the floor like...

Old arm. I have not put new one on because I am trying to figure out suspension problem in my tire thread. This car is testing my nerves..

bump

The large lever on the transmission that the stock shifter linkage slides into has a welded extension. The car does not manually shift right. I bought a used arm at the nats and will install tomorrow. Is there a proper way to adjust the linkage? I had my brother start in park and work the...

Send me your email and I will send you a video that one of the members sent me from youtube. It was a great help and made things very easy because you could see exactly where the measurements were taken from. If you want you can pm me or post it here.

I have a 1995 Neon that the shifter cable broke. I took the battery out and replaced the shifter cable. It seems to shift through the gears perfect but I cannot get the key in the lock position in park. The key goes forward fine just won't lock. Is there any way to adjust the shifter cable...

I need the shifter linkage for a 727 that runs from the bottom of the shaft to the front of the transmission. It is approx. 10" long. If anyone has one please pm me.

I got it...

I am replacing the tailshaft(column shift) on my 727 so that I can mount the shifter linkage for a floor shifter. I am having trouble spreading the clip to remove the tailshaft. The opening for the clip is on the side of the tailshaft, the bolts are removed so I can spin the tailshaft but not...

I am located in Buffalo, New York. I received a couple of pm's and I have a deal on the table. I will let you know either way.

I am running out of things that I need or have overlooked!!! Body paint done. Motor done. Exhaust done. Interior done. Electrical 3/4's done. Tranmission thought was done. 727 tailshaft that has two holes to bolt the floor shift linkage to which will make my car move after 17 years...

My 904 tranny has the holes but of course that is not the one I used. If anyone has ideas for a after market cable let me know. Otherwise I'll start the hunt for a new tailshaft.

Can I run the aftermarket cable shifter with my stock shifter or do I have to go with a aftermarket shifter. RedFISH, I called it a torque shaft assembly because that is how it was referred to in my mopar manual and I did not know how else to explain it. Plus I recently used the wrong...

I am trying to hook up my floor shift (727) to my 340 in my '67 Barracuda. The torque shaft assembly(727) mounts to the bracket on the tranny. I don't have any holes to mount the bracket into the tranny. Does this mean I can only run a cable system? Is there a factory linkage to run a 727 to...

Thanks, that is a great help. I am slowwwwly moving forward.

Can anyone take some pics of their shifter brackets on an abody floor with a tape measure. I need some more references before I weld the brackets in. The more pics the better off I'll be.

It's time to install my shifter on my new floor, but I cannot find the drawings and measurements I did before taking the floor out. I don't know exactly where the bracket mounts. My car is a 1967 barracuda with stock automatic shiter on the floor. any help would be greatly appreciated.