Search results for query: *

Hope this is the right section for this. On a 66 Barracuda with a 273, were there heat shields to protect the plug wires from the exhaust manifolds? If so, does anyone have a set to sell? Mike

Check the engine side of the flanges for a part number.

Which ones are you looking at and for what make and year?

My stock 360 heads have 5/16 course threads. Hope this helps. Mike

The stock V-8 manifold for your year is a center outlet style. There are a couple of casting numbers that will work. The drivers side is the problem. If you can find a stock one, grab it. I'm sure others can help with advice about manifolds from different years/vehicle that would work with...

I've got the left (driver)side stock exhaust manifold from a 66 Valiant with a 273. The casting number on it is 2465847. This number doesn't appear on the lists/charts I have checked. Any ideas? Thanks, Mike

I am thinking about use some parts from Patriot Exhaust. Who has used them. What is their stuff like? Thanks, Mike

I have a 360 for my 66 Barracuda. It will have an auto trans and manual steering and brakes. The more I read, the less I think I know. Headers are not in the budget so iron manifolds it must be. I read one place this works, another it doesn't. Some say use this year, others say it wont...

Come on guys, someone must know.

I'm putting a 360 in my 66 Barracuda, 727 trans and no power of any kind. The budget will not allow headers at this time. I have read a lot about Dakota Manifolds. It seems 92-93 are the best? What other years WILL fit? Thanks for the help, Mike

COOL!! Thanks for the help. Mike

I've got a set of exhaust manifolds that came from I'm not sure what. The right side is easy: 2843953, 68-73 318 Dart or Barracuda. The left is the one: 4006741, can't find any 400s in the lists I have checked. What have I got? Thanks, Mike You might feel old when you go to McDonalds and...

I think I remember that they are too wide to fit between the shock towers.

Talked to them last week. They said the DD7 would not fit 66 cars. They were made for 67 and up. They said they were having problems with them(DD7) After those are corrected, they may try for a set for 66's.

I have a 1966 Barracuda (OE 6cyl) will have 360 with 727. Trans will be floor shift using cable. No power. My budget does not support ITT or Dougs headers. I also don't want to use a fenderwell system. I have read a lot about using 92-93 Dakota stock manifolds. Some seem to say they fit...

That is the tread I didn't see. Thanks, Mike

It seems that 92-93 Dakota exhaust manifolds will fit a 66 Barracuda with a SB. Does that then mean a set of block hugging Dakota headers would also fit? Any ideas?

I started a new thread in hope thoses to replied to the first one would read this one. The response was more than I ever would have thouoght. Thank each one of you. I will do what I want in the end. I just wanted to see what you folks had to say. Thanks again!!

I have a 1966 Barracuda. It will have a mild 360/727 for weekend fun. I'm thinking about a set of Patiot Shielded Sidepipes. Has anyone used Patriot products? Good, bad? What do you folks think about the idea of sidepipes?

Thanks, it looks like I can cross one more item off the question list. I got a drop center link a couple of years ago, Thanks for thinking about it. Again, THANKS to all. Mike

Cool! What engine size, year, model etc. should I start looking for? Thanks for your help.

I'am putting a 360/727 in a 66 Barracuda. Reusing the 6 cyl. k member and Schumacher swap mounts. No power steering or brakes. I have seen a lot of threads about using the iron exhausts form Dakotas and/or Durangos. But they all seem to 67 and newer. Will any of these fit my set up? What if...