Search results for query: *

G37: OS Dual Racing Mirrors, on my 72' Demon. Nice!

Thanks again for all the pointers. I was able to remove the windshield chrome trim by very gently wedging my screwdriver in between the rubber and the trim and gently prying up until I seen a little clip that needed another screwdriver to wedge between and a little twist and pop right out comes...

Thanks again George. Cheers

Anybody??? I really don't want to run a tap through the door threads to check it in case its wrong.

Thanks again for all the tips. I'll let you know how it turns out! Cheers

Thanks, a little confused though. 3/6-16 is that 1/2'' dia -16 threads/inch??

Was that supposed to read "level the rockers front to rear"?? I'm thinking of putting my Demon on a rotiserrie, how will that affect things?? I was thinking that it would be easier to blast the bottom as well as replace the rockers/trunk extensions that way. Is there anything special I need to...

Hi all, I have a partially disassembled 72' Demon, I would like to put the doors on it before I do any quarter panel/rocker removal to check alignment. The problem is that I am missing the fasteners for the doors. Anyone know what size and grade bolt would work as a replacement?? I'm...

Sounds great! thanks for the tips, do you think it would help to warm up a corner with a hair drier to get it started?

I would like to save the rubber if it can be re-used, I do have a heated garage to work in so I can take my time and do it properly. If you don't mind, where did you pick up your plastic window wedge tools? Have you done the quarter glass also? Thanks

So I don't end up like one of those idiots :violent1:, should I reinstall the doors on my semi-dismantled Demon before I remove the rockers/quarters and check for alignment?? I also need to piece in the driverside lower pillar jam and do full quarters if I don't do patch panels. I've seen patch...

Can anyone tell me if a 72' Demon has cemented windows or non-cemented? Also if cemented, will guitar string be sufficient to cut them out? The manual says to use .028 gauge. Thanks,

Thanks, When I get the blasting and primer I'll post more pics, do you have any experience removing chrome trim around windows? I would like to save it if possible to reuse when I reassemble. thanks again for the words of encouragement.

Thanks for your input Grant, I'm picking up the rotisserie next weekend. I have a couple of leads on donar demons for the door jam area, was thinking of full quarters & trunk extensions, front inners as well as rockers, and I think I may patch floors and trunk. Any tips on how to remove glass...

Hi All, I am new to autobody work but think I will get alot out of this site. I have recently aquired 72' Dodge Demon needing full restoration. I am a welder by trade and have a mig, as well as access to a rotisserrie to do the work, What I don't have is experience doing this type of work. I...