Search results for query: *

Don't want to seem like i'm bumping an ad too much so I guess every three or four months aint to bad. This is still for sale so make me an offer. Still mending well over a bursted brain aneurism.

Still available guys and I thought $800 was a good price. Let's try $700.

I'll measure these in the morning and post findings. These are for A body type Darts and Dusters.

I still have these and will work with ya on price. Let me know how much your wife will let ya spend. We might surprise her.

These headers are still here and still for sale. make me an offer and come get em or i'll box em up and send em to ya on your dime.

This heavy duty rear is still here for sale. Make me a real offer and come get it.

I've decided I will do some trading on this Dana. I need a GOOD tiller steering 50-70 horse outboard motor for a duck boat i'm building. Tell me what ya have. I'm in West Plains, Missouri. Make me an offer if ya don't like the price.

Scott, i'll meet ya halfway at $550 and you pay shipping from 65775

These were sold to me a NOS tips. There is no residue inside so we can say they are new and have never been ran. Look em over and notice there is one small piece of chrome off of one tip. Very small. No frame hanger. Just the 2 chrome tips. Very nice. The price is $100 in West Plains, Missouri...

One as new set of Big Block Tri Y A body coated headers. Located in West Plains, Missouri for the price of $700. Here's a couple of pics for your consideration but let me know if another picture will help in some way. I've had these for a few yrs as stash and have never ran them but someone has...

Cracked, the width flange to flange is app. 59"-60". By the way i can barely make out the plates on the end of the axles and they are Strange axles.

This manifold is sold pending the receipt of funds.

Cracked, i'll get that number for ya sometime today and post it up. Thanks for the interest.

Will $150 spark any interest? PM me please.

Make me an offer if ya need or want it. PM please

Make me a REAL offer and let's see this gone your way. PM please.

I will pull the carbs and linkage and drop the price $300 to $1200. Still a steal as someone suggested earlier.

So, can one expect to get a better flow out of the 1:88's rather than the 2:02's? or is it just a correct thing. I'll have to see what I have. Thanks for the info.....

Make me a real offer if your a little short of cash.

The picture only show one drum but i do have both drums. Brake system is complete but will need new pads and new lines.

CORRECTION !! The last numbers that i stated was 48 8 are really 43 8. Meaning there are 43 teeth on the ring and 8 on the pinion. The ratio would be a 5.37 gear. That portion can be changed if you need something else. I've had Eaton Tru Trac units in my 8.75 stuff but some seem to think this...

Pete, i'll see if I can look inside the case and count the cogs on the pinion. Oldman, i'm trying to liquidate my parts. Don't need anymore. I had this whole pile up for grabs for $15,000 which included 4 cars and trailer loads of parts but no takers. This method will take more time but i'll...

Waggin, good question. I walked out and looked. It's held on by two bolts. Pete, is there a formula to divide revolutions of drive shaft by the revolutions of wheel, or vis versa? Seems like I've seen it here before.

Pulled these off of a 78 Road Runner. The rotors are in real good shape but it may be cheaper to get local at your parts store. $50 each here. Only one caliper but brackets and all bolts are there. Valve come with it also. Spindles are in good shape and has the backing plates. Came off of a...

Took this out of a 78 model Road Runner Friday. The car had a 360 auto in it with 56,000 miles on the clock. It comes complete with drums, lines and factory pinion snubber. Found no ratio marking on the ring but the yoke rotated 3.75 times to one rotation of the drum. It's located in West...

Here's a working unit and here are some pics and the numbers off of the ring gear. I see no gear ratio as I read them but I did turn the yoke app. 5+ revolutions to one revolution of the drum. It is located in West Plains, Missouri and it should be worth $800 and i'll put it on a pallet but your...

Still a bargain and still available.

No separation. Total package. I've spent a lot of time jacking with parting this and that out only to have disassembled parts being stored in many sheds. It's time for me to move on and liquidate all this Mopar stuff.

To save confusion i'll work with one rear. I have an 8.75 SG with 3.55 gears. It is a big bolt pattern out of an A body. The perches are 43" center to center. Clutch type. It is a 489 case with complete brakes out on each end with axles. No drums on it but i might have a set here. If i do i'll...

SG, make me an offer on the manifold. I will pull the linkage and the carbs. They are not the spendy part. Rob, someone told me you got ran over by a train. The manifold is for the 413,426, or the 440. Small Block