Search results for query: *

What's more, they rust immediately. I keep a ratchet and 3" extension with an 11/16 on it and check mine all the time. Any thought on using the threadlock that is temporary?

Try these: http://www.ebay.com/itm/Cragar-Lug-Nuts-Washers-for-5x4-Bolt-Pattern-10-Left-Hand-10-Right-Hand-/130836229130?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e76726c0a&vxp=mtr bamacuda

As microsoft golf used to say, "That'll play!"

Stock was 165 90 13 and the 235 60 14 is almost dead on diameter 24.69" vs. 25.10 (1.65% under speed).

I may just go 225 60 up front 235 60 out back. what do y'all think?

What I am doing is: 65 Barracuda a body 8 3/4 rear Cragar s/s 14 x 6 up front 4 inch? back spacing 14 x 7 in back 4.125 back spacing going with BFG T/A's What is the recommended size for this set up? Thanks :prayer: FABO

What I am doing is: 65 Barracuda 8 3/4 rear Cragar s/s 14 x 6 up front 4 inch? back spacing 14 x 7 in back 4.125 back spacing going with BFG T/A's What is the recommended size for this set up? Thanks :prayer:FABO

see below

ditto!

This is the way we used to do it when everyone didn't expect a high dollar rebuild. It is very satisfying to do it yourself, and not spend a ton of money. Great job!

Yes they will! The back spacing and tire width/height will dictate the fit. Lots of 14" 5x4" wheels available, some 15". Do a search on here and you will see where many folks have posed the question about the backspacing and tire widths and there are a lot of pictures and you can get a lot of...

I use spit and my thumb! :thumbup: Actually, bleach white is great, but if you clean them regular with mild soap and water, they stay white!

Those have 6 slots. I haven't seen that before!:cheers:

If you like the ones part # 2823010 - 14", I have about 8 (or more) of them I will sell really cheap...say $50 plus $15 shipping in the US. Most are pretty nice. I will be at the Nats next weekend. David

that's a top notch notch!

and to add to that drawing, backspace is the total of the positive and negative offset on a positive offset wheel and just the negative offset on a negative offset wheel, am I correct on that? It's the distance from the wheel mating surface to the rim (measure with a flat bar across the wheel...

how about fitment on an early a...such as a 65 barracuda. What fits it? What size cragars and what tire for maximum muscle?

When you run into the places that won't take a debit, go to your bank and get a visa gift card for the amount of purchase and use it. It worked for me.

ttt

When I say huge, they must have been 10-12 inches wide, and in 65 a body terms, thats huge!

found this website. very good explanations. https://www.rsracing.com/tech-wheel.html

NWDave (and others) so put the empty wheels on the car (one front and one rear) and get clearance on rears to inside and outside. Then on fronts, I will need turning radius clearance for height, and fender clearance for width. I hope I measured the backspace correctly, i placed a straight edge...

I need about the same info, I'll watch this thread

any ideas???

I have a 65 Barracuda I have - 5 on 4" - 14" centerline wheels, (2) 8" with 4" backspace and (2) 7" with 3 1/2" backspace. What tire size should I use with these wheels on this car? I am looking, as you may have guessed, for maximum traction and a good beefy look. Also, the center caps are...

Love it!!!!!!!

I bought a set of simulated Bluestreak tires from Diamondback. They are over 2 years old and the blue is still brilliant. Their technique involves vulcanizing the stripe...to your dimensions...over a butyl base stripe so that the blackness of the tire never bleeds though to discolor the stripe...