Search results for query: *

barracudakid

Thanks for the advise. I figered it out right after i wrote the post. I forgot about Ign 2 wire and when I hooked the small red wire up direct the car ran That's when it poped in my head. Thanks for your info. Mark

I have a MSD ditital 6. I hooked the pos on wire to the coil pos wire. The car ran fine. Problems started when I up graded the voltage regulator. I have power when the key is on run but no power to the coil when the key is at the start position. Any help Please. Mark

Hear is a line from this site.If your a electrical dummy it is going to get vary confusing with what type of switch to buy,how to hook it up,how many solonids to use,etc. good luck. Mark /www.forabodiesonly.com/mopar/showthread.php?t=177531&highlight=Battery+Cut+Switch+Diagram

Glad to help.

You can't run the tach wire to the coil with a MSD ignition.The wire from the tach should go to the MSD box.

That amp fuse are you guys using with the 120 amp alternator.When i try to run a fuse it blows.Ti is charging at 13.7 and if I run the 8 gauge wire straight there is no problem.I went to a 60 amp fuse but it blow that to. Mark

Let me guess you have a set of them.

The ignition switch will turn the box off.The Digital 6 has a anti theft built in it. Like I said re inventing the wheel for what.

This is where problems starts and everything go's hay wire.It is a power wire,the only thing it does is turn the box on Thats it.I see all kind of problems in hear about MSD and now I can see why.You don't reinvent the wheel.

This is what I got from a old mallory diagram.It is for a 5 wire tach.Hope this helps. Mark WIRING INSTRUCTIONS Wiring diagrams for this unit are shown on the back of this instructions sheet. RED 12 volt power BLACK Ground GREEN Trigger from ignition...

What we have here is a brand new reproduction voltage regulator for a 1962-1969 Dodge Plymouth or Chrysler vehicle. This regulator looks almost exactly like what the originals look like from the outside, it even has the IGN and FLD stamped into the cover, but hidden inside is a small circuit...

Can you elaborate on how it's hooked up? If all you do is break the battery lead THE CAR WILL STILL RUN on the alternator Hear is where you are wrong.I don,t want to steel this guys thread.With all the relays all I see is that you are separating the ignition from the alternator.If they are on...

Ok I was just wondering why.My kill switch will cut the car off when you turn it off.My car kills all the power even the alternator with out all the relays.I never seen any thing happen to a car from a wiring problem even in a crash.The only thing I have seen was wrong and sloppy wiring.Also you...

Question? What are all the relays for.I never had a problem with thw regulator mopar system.The only thing I do is run a #1 wire from the battery to the starter or the the sterter relay.I know what relays do and understand the use of them.What I don,t understand is all the ford starter relays.

69Chrgr just wondering how you made out with your msd box.

You can not use the white wire at all.The white wire is for a points type distributor only.You have to unhook the white from the orange and you should be ok.Don,t use the white/blue wire either it is for honda distributors. Mark

On my dash the tach went right in and the speedo I had to cut the hole larger.The fuel gauge went right in.This is the pictures and the back .I am going to sand the bezel smooth and go up to eastwood to see what thay got for paint. Mark

Anyone

Do anybody know the difference between the 67 to 69 and the 70 to 72 wiring harness.I have a engine wiring harness from a 70 A body and want to use it on a 67 barracuda. Can I just plug it into the 67 harness block or do I need the wiring harness from the inside of the car also.I want to use the...

First of all i would like to thank you for all of your input on the dash.I have to answer some questions that was raised.I am going to finish the dash.dartboy69 I have a barracuda not a dart.wishforhemi it dosn,t matter to me if the dash is reproduced or not.I am not a numbers guy and I like...

I am starting to do my dash.What do you guys think.This is the phantom speedometer and if it looks ok I will do the tach in the other big hole.I don,t know what to do with the middle hole{ suggestens please.Maybe fuel gauge? After I am done cutting the holes and getting everything to fit,I am...

I gought jeg,s spark plug wires.They were 8.5mm and fit very will. Mark

WIRE FUNCTIONS These are the two heavy gauge wires (12 gauge) and are responsible for getting direct battery voltage to the Ignition. The ignition has an internal fuse so no fuse is necessary. This wire connects directly to the battery positive (+) terminal or to a positive battery junction or...

Need one for a 67 barracuda air car. Mark