Search results for query: *

I am located at 66048, Kansas.

Looking for a pair of small bolt pattern Rallye wheels, 14". Don't need the center caps or the trim rings. Must be able to hold air. Paint does not have to be good as I will paint them anyway. I don't have internet so I may be a little slow to respond so bear with me. Merry Christmas to...

I am looking for a speedometer gear for an old cable shift, push button, 904 trans. The current gear is a 17 tooth. I have been told that I need a 15 tooth. I went from 6.50/13" tires to 185/70R13" which is supposed to be a direct replacement tire but me speedo is at least 10 mph off. My R&P...

I would like to have an A or B-Body complete car in the Kansas City Area. I would like it to either have no rust or all rust repaired. Any drivetrain will work. The interior must be complete but need not be in good condition. PM me with what you have. I will consider a car as far away as 100...

I am looking for any of the above cars, in running condition, preferably. Body MUST be in rust free condition[ rust repaired ]. Also must be withen 100 miles of Kansas City. It need not be running, as long as it has an engine and transmission in it. Must have an interior, in any condition. It...

I am looking for a complete running A or early B body in the Kansas city area. Must have NO rust( rust removed ok) Must be a 2 door. The interior can need work as long as the body doesn't. Please PM me. I do not have internet so that is the only way I can be reached. Thanks, Bill

If you can't find them locally, I have a set but I live in Kansas. Let me know at [email protected] Bill

If Jim doesn't have one, I do. $10 + shipping. I'm at 66048 Regards, Bill

I have the complete set, but will only sell as a set. If interested E-Mail me at [email protected] Regards, Bill

I am looking for a running project that I can use and fix up. I need one in the Kansas City area. Just about anything would do except a full sized car. A, B or E bodies, or a Volare or Aspen, or even a Mirada. I might even take a old Dakota. four or six will work. Send to...

I believe I have one around 50" with small u-joint mounts.

727 or 904. If a 904 will fit a have a couple of them. E-Mail me at [email protected]

I have a New set of cam bearings I will let go for $15 + shipping. Shoot me an E-Mail to [email protected] Bill

I may have some. Give me a length. Contact me at [email protected] Bill

I have the coil bracket. If you still need one e-mail me at [email protected] Regards, Bill

I have a set of 3.21's. I will sell cheep. E-Mail me at [email protected] if interested. Bill

I have a throttle bracket off a 273. E-Mail me at [email protected] Bill

I have the lower bearing and spring. Send me an e-mail at [email protected]. I think I have a pic of it. Bill

Do you have a radio> I have a '66 Dodge radir, an AM.

Chrysler uses a hollow shaft that will extend. The shaft is held together using plastic rivets. You can break the rivets and extend the shaft to fit whatever steering box you might want to use. I know this because I Stock Car raced Mopars on the Dirt, and I used many different combinations of...

Do you need a long or short coupler? I have some. If you can get by with just the housing and use the guts out of the one you have, it might be easier to find one. I have some pics of the ones I have, if you are still interested. E-Mail me at [email protected] Regards, Bill

I have a set of 3.21's. $50 + shipping gets them. If interested E-Mail me at [email protected]. Regards, Bill

I have one, how long do you need. Let me know at [email protected]