Search results for query: *

Well I sprayed the panels, console, arm rests, and heating vents last night. First that paint is damn expensive! Its Dupont @$107 a pint!! The vinyl cleaner for that paint was $101 per gallon. I used about a pint of cleaner but used all 2 pints of paint. Expensive night. Probably li y could have...

I like the green as well! Tried the soap you dropped off and just didnt cut anymore then I already was at. Tried some different cleaners i had here but nothing worked. Im stopping at broadway tomorrow to get a different gloss for the taped up area. should give just a little gloss difference...

Well I tried the different cleaners and soaps with abrasives, No luck. the dark stain is just to visible for me so Im going to spray the panels. Spent the night preparing and taping the panels for painting. Here are pics of where im at. Im going to use the same color vinyl paint but use 2...

Damn, at first glance I thought it was wine!! I'll give it a shot tonight and see how it does. Thanks!! Rod

I can try the acetone. I have some of that here at home. Thanks Mike

Wheres the before photo!! lol That panel looks great. Im afraid mine could be smoke and arm oil mixed. Gonna find out if it will come cleaner. I moved the car into the house garage so I can paint in the shed. Lots of room the work when i get home tomorrow. Rod

I dont know what kind/brand I have here. I did the fine bristle brush but will try again with the cleaner. Rod

Keith, thanks for the offer. Im going to try some hand cleaner tomorrow night. I dont expect much but one never knows. Will also try it with some scotch brite if needed. Im thinking I will be dying these panels! Rod

Thanks for all the responses so far. I painted my dash pad cover with a vinyl paint that I bought from our local paint store. I forget what brand it is but when get home tomorrow night I will post. It is used with an automotive spray gun just like painting a car. I will try using the abrasive...

Working on my 66 Dart. I started to clean the panels using 409 cleaner but they didnt come what I would call clean enough. So im thinking at this point I will paint them with the vinyl interior paint like I used on my dash pad. I was wondering if anyone else has done this? Im sure I cat find a...

Ive got the pillar covers however they need to be reglued and then painted before I can install them. I guess I will get out the window seals and put them in so they can relax and the kinks come out of them. They been in a box since I bought them 3 years ago. Im sure they need to straighten out...

I looked at one of his threads and it had mostly exterior shots. He had a lot of the mirror pics as well. I must not have had the right ones. Rod

Working on my 66 Dart, other than the red trim at bottom of the windshield are there any other trim that is supposed to go around the windshield? I dont remember if I took anything else off. I dont think there is. I know the rear window gets a metal trim arounad it. Pics would be nice!! Also...

Installed the rear view mirror, both sun visors, interior light and both rear clothes hangers. Took a while to clean the visors before they were even fit to go in, they had 40 year old crud hanging on them! Also re-glued the front of the headliner and will do the outside of the front headliner...

Started the install of the headliner tonight. Not sure i did this in the right order but if you have been following you saw I installed the bows and hung the liner on Sunday. Then I went out and bought some plastic putty knives and 2 bottles of weldwood DAP contact cement. By the way, those 2...

Went to Ace yesterday and bought the contact cement. I also bought a few plastic putty knives to help push the liner tighter. Didnt know if that would help but they were cheap! Heres some close up pics of the area just under the seams. Rod

OK, took a few minutes to see what I was going to run into. And yes I found I was missing that one bow. Luckily I had that other set of 4 bows that were still in the 66 GT i bought for parts. Non of them were right but at least i was able to cut one down slightly and it looks as tho its going to...

No I dont have the old liner. I'm going to try to at least hang it in there tonight and that will tell me where I'm at. Then I'll either be able to move forward or figure out a plan. Hope to know more later. Thanks

Started to prepare to install the headliner. Its a 2 dr hardtop. I installed insulation on the inside and I put the bows thru the pockets on the headliner. SO heres the question I have. The pockets or sleeves that the bows slide into, first there are 6 and I only removing 5 bows. 2nd, since...

I dont know of any mopar products that has hotter floor boards then an older C3 body Corvette because of the fiberglass floors and the exhaust running under them. On mine I used the Lizard skin and sprayed the interior side of the floor boards with 2 coats. The reduction in floor heat was...

Ive never removed the dash from a 70 Dart. But in my 66 Dart as mentioned above the windshield needed to be removed for dash to come out. Now as cosgig and others have said you could remove the heads of the bolts from underneath but Im sure thats not easy. Once the dash is out your probably...

Here is mine on my 66 Dart. I think its very clean looking and it was all done with scrap metal I had laying around. I have more pics if you want to see them. Rod

Here are the pics of the anchor bolts I thought you were referring to. Rod

When you say floor anchors are you referring to the bolts to fasten them down? Rod

Give me a day or 2 and I will get you some pics of the belts. I did a mini tub on mine and I cut out the anchor section. I just cleaned up a lot of the old stuff I had laying around for a year or so and I think I may have thrown out the anchor section but if not you are welcome to them. Pm me...

I am sure I have a set of seat belts for a 66 Dart. They came out of my 270 Dart. They are red. I have no use for them. Let me know if your interested or need pics. Rod

Still trying to find someone that replaced the headliner on your 66 Dart that might have some pics of the very rear bow and how or what the springs at the rear window were hooked too. I am missing that bow and not sure how the springs were used. Thanks Rod

No I am not building a show car and I plan on driving it plus doing some racing. However I still want to make it as nice looking as I can and it is brand new carpet. I will try the utility knife and I will work as you have said from the middle out. Thanks for the suggestions. I'll post pics...

I'm going to start installing my interior in my 66 Dart. Here are some things that will make this a little more difficult. First I have installed a rollbar. I have the front bars welded to the floor in the front floor pan area. Of course they tilt toward the rear so I will need to cut holes into...

No one have any information on the bows or pics of at least the rear bows in place. I checked the new headliner last night and saw it has 6 bows so im just missing the rear bow. Thanks Rod