Search results for query: *

X3 Thats all I did for a pair of Cal Customs. Plus a little red permatex over the screw heads for even more cheap insurance from having any screws back out! I bought a set of MP`s that had some homemade baffles in them too. They have a 1/4 " hole drilled in the center of each baffle to prevent...

Not sure of your budget but here are a few Darts and other Mopars I just found searching Craigslist in my area. I don`t know anything about these cars just posting them. Happy Hunting! Good Luck! http://westernmass.craigslist.org/cto/3999532227.html...

Dug up my receipts. Here is what I have: Eagle rotating assembly part #20502 $1225.00 202-3203 cam $159.98 Lifters HT-2011 $65.60 08-1103 H.D Timing set $59.56 SH-285 Cam Bearings $26.89 M-72 Oil Pump $49.70 260-1033 Gasket set $81.31 SUB TOTAL $1668.04 MACHINE SHOP WORK...

I`ll try and dig up my receipts. Maybe my math is off and it`s closer to $5k I remember about a $1K for the rotating assembly,new heads around $1K-$1,200,machine work around a grand. Which leaves out prices for a flat tappet cam & lifters, head bolts, gaskets, carb, ect and anything else i`m...

I had my 360 stroked last summer at a local shop .030 over cast crank mild cam nothing too crazy,your build sounds similar to mine. Cost somewhere in the neighborhood of $3-$4K. I cant remember exactly, bought brand new Indy X heads and a carb for it as well so probably closer to the $4K amount...

Just spoke to my engine builder the pistons I have are .030 let me know if you are interested in them. If you don`t need them I may have someone else who wants them.Thanks!

I bought my motor knowing it had a bad piston which I was going to repair and or sleeve if necessary so I don`t think there is a problem buying just one piston. I will double check the size. Hopefully others here can chime in with advice if this is a good way to put this motor back together on...

Just saw this thread I am mostly over on FEBO. I`m rebuilding my 360 and I have the old pistons and rods from my motor they are Keith Black hyperutectic pistons. One piston was bad I have 7 left. I didn`t know what to do with these and I hate to just scrap them I figure they must be worth...

I just found this post and figured I would share my experience. I am going through my own 360 adventure right now as well. Just like the original poster I don`t have a ton of experience with engines. My story begins with a 360 I found on Craigslist for $300.00 description of motor 360: early...