Search results for query: *

  1. A

    360 H balancer

    I have a 79 360, I noticed on the balancer it's marked with a groove every 90 degrees and of course TDC and the advance numbers, is this a stock balancer?
  3. A

    Guess My combo !

    OK, didn't build this thing, 65 Dart GT, 79 360, trunion 4 speed, 7 1/4, has the hump, vin says /6. I haven't dealt with SB's except Poly's, how do Ya think they put this together?
  4. A

    360 motor differences

    My plan is to install the Vintage Air unit on my 65 Dart with a 360 in it, the block in the car says 79.Vintage Air has a bracket that will mound the A/C compressor, power steering pump, and the alternator to the motor but they list it as fitting a 70-78 318/340/360, for some reason I couldn't...
  5. A

    No timing tab

    I bought a 65 Dart, 360 motor in it, no history on the car, The harmonic balancer is the weighted cast crank, I haven't crawled under to see the blocks displacement to verify it. someone has marked it with chalk on the TDC line, but there's no tab for timing the dang thing. any ideas?
  6. A

    .030 360 vs 408

    what can I expect from a .030 360 verses a 408 stroker? mostly a street car. tell me your combo for each. 71 Duster auto. Starting with a .030 78 360 block, that's it! performance VS cost on each
  8. A

    SB stroker or BB storker

    how bad of a storker could you build, some street use, but making money a these GA hole in the wall tracks. stroker SB IE 408 or stroker BB IE 451
  9. A

    deck height measurement

    deck height is the distance from the center of the crank to the top of the block, right? how is this measurement taken?
  10. A

    .060 over on a 79 360 block

    Anyone see any problems going .060 on a 79 360 block?
Back
Top