Search results for query: *

Hi there! Will my stock 69 air conditioning work with an air Gap manifold? E.g Is the mounting provisions provided? Thanks! Dave

I have popped a head gasket on my 360(coolant leaking out side of block only) Can I get away with replacing my .040 thick gaskets with a .028 thick to gain compression without any valvetrain problems? Ratio now is 9.55-1 and have stock non adjustable valve train. Also is it normal for a gasket...

I have a Holley 3310 carb. there is a provision (port)for brake vacuum,but nothing for the pcv valve. I have my brakes hooked directly to the manifold. Can I hook my pcv line to the carb brake booster port? Or where should it go? Thanks! Dave

Will an Eddy Air gap intake with holley carb on a 360 fit under the hood on my 69 dart??? It looks like it will be awful close! Thanks! Dave

I have a rebuilt 360 non magnum. It was balanced and has stock balancer to the best of my knowledge. It was in front of a 4 speed and now I want to run an auto. The crank has 7 holes plus a notch.(8 hole?) I want to run a new converter on my stock 904 tranny. What do i need to make this work? Is...

I have just bought a 360 which was in a 4 speed car. What do I need to hook up to my 904 transmission? I am concerned about an imbalance because the 360 is an external balance,where my 273 was internal. I am planning on replacing the torque converter as well. Thanks! Dave

I have a 1969 dart with a 273 engine It has a 4 barrel carb mechanical secondaries. The secondaries don't seem to open. Was the original manifold a 2 barrel? With a edelbrock air gap for a 318-340 fit? I will eventually replace the engine with a 340 and want to be able to reuse the manifold if...