Search results for query: *

  1. Beatnik

    [SOLD] Nice Holley 4779 750cfm DP & -6 AN line!

    Nice Holley 4779 750cfm mechanical secondary carb and Summit -6 AN line. Little time on complete rebuild. Ready to bolt on and go. Has non stick gaskets, 50cc secondary accelerator pump,threaded brass jet extensions with notched secondary float, tygon seals on the idle mixture screws, new...
  2. Beatnik

    [SOLD] SB stamped rockers, shafts, hardware & pushrods

    Set of small block LA stamped rockers with shafts, hardware and new pushrods. Used these in my 360 for awhile before building my 5.9 Magnum. These are just sitting around. $60 shipped lower 48! PM me! Thanks FABO!
  3. Beatnik

    [SOLD] Mopar Magnum Valve Covers

    Selling these Magnum covers. They are in good shape, no nicks or scratches in them. They were on a 318 Durango. Little dusty, and could use some clean up underneath. Baffles intact and come with the caps you see. $130 shipped lower 48. PM me! Thanks FABO!
  4. Beatnik

    [FOR SALE] 90* Oil Filter Adapter w/ Bolt

    90* adapter and bolt as shown. Good shape cast iron, off my LA360. $50 shipped to the lower 48! PM me if interested! Thanks FABO
  5. Beatnik

    [SOLD] Hughes "Whiplash" hyd flat tappet 340/360 cam

    Ran this in the Duster and was an excellent cam, motor was bone stock late '70's 360 out of a pickup with an Air Gap and Holley 750 and it ripped!. Swapped motor out for rebuilt 5.9 Magnum and saved the cam out of the old LA 360. Maybe 300 street miles on it. Real nice shape. No lifters...
  6. Beatnik

    [SOLD] Mopar Performance black wrinkle finish valve covers

    Selling my MP black valve covers off my 360. Putting a Magnum in my Duster so these are up for sale. Nice shape, clean and baffles in place. These have already been notched for Edelbrock intake runners so they seal up real nicely! Also come with oil filler cap and chrome Mopar push in...
  7. Beatnik

    [FOR SALE] Engine and Ignition wiring connectors and pigtails

    Hey guys and gals, since re-wiring the Duster I salvaged all the good stuff off the old harness. Figure I'd see if anyone needs any of these for spares or to replace a bad one etc... Some individual pics below, sorry for multiple pic posts but couldn't get em all in my orig post with the...
  8. Beatnik

    [SOLD] FBO Ignition: ECU, Coil & Ballast

    Selling the FBO ignition off my Duster. Two seasons on it, no issues at all. ECU is a USA made unit, not one of the Chinese ones! Everything in real nice shape overall. Bolt on and go! Nice upgrade over the MP orange box stuff that would take 2 min with one arm tied behind your back...and yes...
  9. Beatnik

    [SOLD] Vintage DIrect Connection valve covers (small block)

    Selling my 1st Gen DC valve covers with the breather, cap and spare set of grommets as shown. These do not have the flat ends like the 2nd Gen covers or the wire looms like the Lil Red Express versions.These were on my 360 in my Duster, didn't leak with cork gaskets. No damage, dents etc but...
  10. Beatnik

    [SOLD] 14" K&N X-Stream lid, 2.5" filter and custom base

    This has been on my Duster for 2yrs. I'm switching things up this winter so it's up for sale. What you get: - 14" K&N X-Stream lid - 14" x 2.5" K&N tall filter - chrome drop base with custom breather tube welded on These parts are used but in nice shape. The lid and filter could use a clean...
  11. Beatnik

    [SOLD] Nice Quick Fuel Slayer 750vs & AN -6 line...

    Well had this carb on the 360 in my Duster for the summer but I'm gonna blow up my combo this winter, pull my heads and up the ante on my motor and go with a mech secondary Holley Street HP I believe....so this is for sale to help fund the project. It's a Quick Fuel 750vs "Slayer" and Summit...
  12. Beatnik

    [SOLD] Auto Meter Sport Comp Tach

    Had this lying around and not gonna use it. Not the prettiest pig at the trough but it works fine and the lens is clear and not cracked. See the dent in the outer ring in the pic. Was in a drag boat for a long time that saw minimal use. So it was used far less than it it looks like! But...
  13. Beatnik

    [FOR SALE] Auto Meter 2 5/8" Triple Gauge Pod and Swivel Cups

    Used Auto Meter triple gauge pod for underdash and swivel cups so you can rotate your gauges out/up toward the driver etc... $20 shipped. PM me!
  14. Beatnik

    [FOR SALE] NOS Clear Distributor Cap

    Bought this awhile back from Rick at FireCore 50 when he stumbled upon some stock of these caps. Paid $50 plus tax/shipping. Sell for $50 shipped. Had my fun with it, could use the $ for other parts I need. Very nice shape, NO yellowing, no cracks. This is a nice vintage one Made in...
  15. Beatnik

    [SOLD] Auto Meter Sport Comp Tach

    Auto Meter Sport Comp Tach. Retails for $145 at Summit. This came off a running car recently. Was going to use it on my Duster but going a different route. Nice shape functions fine. Wires were cut but there's 4-5" to splice into no problem. $75 shipped? Heck I'll throw the stickers in...
  16. Beatnik

    [SOLD] Nice Carb! Street Demon 625cfm & Tuning Kit!

    Selling my 625cfm Street Demon and Tuning Kit. Had this on my Duster for the past year replacing an old 1406 Eddy. Best carb I've run period. On my stock 360 it was great. Bolted it up to my new hot 360 with Hughes cam and Air-Gap intake etc and it runs great, just need/want more carb now. I'm...
  17. Beatnik

    [FOR SALE] 17" Flex Fan...

    This fan is a 17" Flex Fan. Was on my Duster...still in fine shape functionally, some scuffs etc from being mounted on/off over time. $40+ new online....yours for $20 shipped in the lower 48!
  18. Beatnik

    Good power steering box/pump/hoses etc..

    Selling my power steering set-up off my Duster. This just came off the car a couple weeks ago and worked fine. No leaks or issues. Not parts that have been sitting on a shelf for years. $100 + shipping on this set-up. Bolt in and go! PM me! Thanks FABO!
  19. Beatnik

    2 - Weiand Action + Intakes...

    Hey all - Got these 2 Action intakes. They've both been professionally glass beaded and repaired/modified by my machine shop guy. Both are very nice and ready to go. Was gonna use one on my 360 build but I think I need something bigger like an Air Gap or RPM etc... 1 has had some repair (see...
  20. Beatnik

    [SOLD] Summit 600cfm carb! See pics!

    Selling my Summit 600cfm, vac secondary, elec choke carb. I bought it re-man'd directly through Summit for $241.90. It's never been run or had fuel in it. Comes with everything seen (except the stand!), carb, fuel line, bag 'o' fittings, intructions and tuning DVD! Sell for $200 shipped to the...
  21. Beatnik

    [SOLD] Iron adjustable rockers w/ Grooved shafts & pushrods! See pics...

    Selling this nice set of small block iron rockers, complete w/ hardware and grooved shafts. Rockers are in nice shape, bolt on, adjust 'em and go! Misc pushrods included! Was going to use these on my LA 360 but since I'm building a Magnum....they are not needed. $125 shipped to the lower 48 PM me!
  22. Beatnik

    [SOLD] Edelbrock 1406 600cfm carb!

    Selling my Edelbrock 1406 off the Duster. Got a new Street Demon so this one is up for sale. Ran it all last summer and this summer up to now with no issues just wanted to try the new Demon out...not the prettiest, but bolt it on and go! It's got new step-up springs in it and the remaining...
  23. Beatnik

    [SOLD] Hughes HEH2832AL cam & 5003 lifters!

    Ok, springs are sold, so here's the cam/lifters. I'll do $200 shipped! That's a great deal. The cam is Hughes HEH2832AL, great hot street cam for a smallblock! Lifters are the 5003's...these are the more expensive, nicer lifters. (not the 5001's). Pics below of the cam, lifters and cam card. PM...
  24. Beatnik

    Nice used Performer RPM 7176 (318/340/360) $125 shipped!

    Well, not going to use this intake afterall on the 360....so it's up for sale. This is a clean used intake. Nice shape, no issues and it's got a power brake fitting and the water jacket fittings! Lot's a cruddy one's out there for similar prices, this one is nicer than most used intakes. $125...
  25. Beatnik

    [SOLD] Hughes HEH2832AL cam, 5003 lifters, 1102 springs! $300 shipped!

    Hey guys and gals. Selling my Hughes cam/lifters/springs kit. All parts brand new in the box, cam has never been out of the plastic. Was going to use this on my LA360 in the Duster but have since picked up a nice used 5.9 Magnum, so going rebuild that instead and the 360 is going to stay...
  26. Beatnik

    TCI Streetfighter for 727 (Part#142200)

    Had this up for sale awhile back w/ my valve body. Sold the valve body so I've got this for sale still. I can throw in a B&M flexplate (10236) for use w/ this convertor w/ a 727. $300 shipped in the lower 48 Or make me an offer! Thanks FABO
  27. Beatnik

    KB107 pistons (set of 8)

    Was going to pop these in my 360 but I'm now building a Magnum motor so these are up for sale. Will take $100 shipped. Could use a cleaning on the tops if you want before install. These are $260 plus tax/shipping new... .30 over!! PM me
  28. Beatnik

    Stock 727 complete w/ convertor, flexplate & extras!

    Well finally got my new hi-po trans in, so the stock one is out and on the bench awaiting a new owner. This is a stock trans, mileage unknown but it didnt slip, shifted well and never had an issue. Could be used as is behind a mild smallblock, or throw some parts at it for a hot street set-up...
  29. Beatnik

    TCI Streetfighter for 727 (Part#142200) & Cheetah Rev Man Valve Body (Part#17156)

    Was going to use these in my 727 rebuild, but going different route so now they are up for sale! Nice set up for a hot street/strip A-body!! They are used, but in great shape and ready to go. - TCI Streetfighter convertor: Nice shape, ready to go - Cheetah 17156 Rev manual valve body: Nice...
  30. Beatnik

    Gaskets! Intake and Oil Pan set's for sale. See pics!

    Got 3 unopened gasket sets for sale. Take 'em all for $40 shipped...or $15ea shipped. See pics... Set 1; Mr. Gasket 318/360 Magnum Intake Set (Not LA) Set 2: Fel-Pro 273/318/340 Oil Pan set (Not 360) Set 3: NAPA 360 Oil Pan set PM me...
Back
Top