Search results for query: *

I have a 65 Barracuda and I plan on installing disc brakes. I was reading the conversion 101 thread and it comments on the upper ball joint. My used disc brakes came from a 71 scamp I believe he said i know it was a 71 a body but not sure it was a scamp. Anyway what are my upper ball...

Okay so I did the single to dual master cylinder upgrade but I am getting ZERO pedal pressure. I do not have any leaks and I am getting fluid at all but the front passenger side. I think it is going to need a full rebuild the pad has eaten into the drum. I am at a loss. Please help.

Okay I have a 65 barracuda and the dual master cylinder does not have the push rod. How do I make the dual master cylinder work with my push rod? Also I have a front proportioning valve that directs to the front driver and passenger side then to then rear proportional valve which separates to...

Okay so my drum brake is stuck and I have been looking at pullers and they are expensive as hell. I have an idea for a DIY tool. Take a 12" piece of 1 inch steel tubing Drill a 5/8 hole at 6" Then measure your drum brake radius and dill a hole left and right of the center Then you can weld a...

Okay so what is happening is every few months I have a brake issue. It always seems to be my self adjuster cam pops off. I have read the service manual a bunch and I am pretty sure I have everything in place but the still fall. Should the cam contact the star wheel on the inside or outside...

Okay I have checked and all the parts are in place the cables are there and not broken but when I pull the handle I get about 1/2 to 1 inch and then nothing. I assume something is frozen somewhere but I have no idea where to look. Anybody can direct me?