Search results for query: *

Got the flexplate changed without pulling the tranny. Then woke up from my dream and spent most of the day Sat changing it out. Three of the ears were cracked, one broke all the way off, good thing I didn't wait any longer to do it. Tried to save a little time and propped the starter up on the...

Whats the difference and which one is best for a street car, raced maybe 10 times per year? Thanks Bruce

Looking for someone in the Austin/San Antonio area to do my 904. Thanks Bruce

Can the flexplate be replaced without pulling the trans? Will the converter slide back far enough to get to the bolts? 318/904 Thanks Bruce

Got a quote of $265 to install a ring and pinion, is that about what it goes for now days? It's a 8 1/4 suregrip. Thanks Bruce

I have the numbers off my trans they are 4461036H with 09104 under that. Is this a 518 or 500? Came out of a 91 1/2 ton PU Thanks and God Bless Bruce

Can the low gear in a a-518 be changed? I will be using a 3.55 rr so a lower gear for launch would be nice. Thanks and God Bless Bruce

I took the car up to 45-50 in 2nd vibration there but minimal, at 70-75 very bad, put car in neutral at 75 vibration gone. When the vibration is bad you can feel it in the gas pedal and very strong from the shift lever. Local guy said it might be the pinion, possible? Thanks ya'll (been in TX...

I left work the other night, short ramp fast accel, and when I got on the freeway developed a sudden vibration at about 65-70mph, not steady but on off at about 1 second intervals, almost a shudder. Pulled the driveline no bad joints, tried high rpm in second and it's still there,so is it coming...

What is the downside of using a ring and pinion that is used? Thanks and God Bless Bruce

Has anyone moved their springs inboard to get more tire clearance? What does it do to the, shock mount, travel and geometry? Thanks and God Bless Bruce

I found a couple of complete 8 1/4 rear ends but they have 200,000 miles, Are they worn out or still have some life left? They only want $60 for each and they are sure-grip with 355's. Thanks and God Bless Bruce

I picked up an 8 1/4 from a 70 charger what spline axles would it have? Thanks and God Bless Bruce

I picked up an open 81/4 for the Dart, which upgrade is the best for mainly street use, sure-grip,Auburn HP ,Detroit Locker, Lockright, Trac Lok? So many choices so little money. Thanks and God Bless Bruce

I was reading a how to rebuild small blocks book and the author said that the flex plate should be marked at disassembly and put back on the convertor in the same position. True? Thanks and God Bless Bruce

How do the axles come out of the 71/4? I have the cover off, not seeing any c-rings. It has the 10" drums, 4" bolt pattern. Thanks and God Bless Bruce

Can the axles from the 6 lug dakotas 81/4 be swapped to the 41/2 pattern car axles? Thanks and God Bless Bruce