Search results for query: *

I have a nice pair of lower control arms off of a 73 Dart. The car had disc brakes and NO sway bar. Price: $60 Shipping: Yes, at buyer's expense. In the CONUSA only. PM me an email and I will get you some pics out.

I have had this transmission for years. It was a working transmission probably 10 years ago when I parted the car out. It is out of an 85 Diplomat. I have the torque convertor that has been stored inside my shop for quite awhile. Location: Klamath County, Oregon Price: $60 Note...

I have a K frame from a 1976 Dart. It is a /6 225 engine K. It has the factory sway bar and lower control arms as well as the frame. No other parts are attached to it. If I don't get rid of it when I go to Portland next week, I am happy to discuss selling parts off of it. $75 firm in cash...

This is a factory cast iron intake manifold that came off of a 1976 or so Dodge truck. It is not a spreadbore but a square bore style carb flange. It is 4-barrel intake and OEM. Likely delivery to Portland next week, most likely on the 30th or so. PM me your email me for pics and more...

I have a nice pair of manifolds off of a 2-barrel, 1973 318 A body. They are in nice condition with the heatshield still attached and the choke stove still turns. Price: $110 Shipping: Yes, at buyer's expense Location: Rural Klamath County, Oregon I can possibly deliver to...

I have three sets of heads. All will needs some TLC; I would call them good cores. I am willing to combine the parts and sell for less. 452 castings. Need cleaned up because they have been sitting. $60 346 castings. Same as above. $50 516 castings. These have been sitting for years and...

Getting out of Mopars, unfortunately. I have known for a long time that I should, but now it IS time. The following parts list is what I have for big blocks. I may have some extra pieces on hand, but this is what I recall. 76 400 long block with a truck pan-good builder/maybe runner...

This came off of a mid-70's mopar, 73 is what I am thinking. The lines look useable. I do not remember specifically which car it came off of. Look the pics over and let me know if you have any questions. Price: $45 plus shipping. Shipping: I generally ship through the USPS due to my...

This is a driver quality hitch that is made by Draw-Tite. It has 1962 dodge dart stamped right on it. Price: $25 plus shipping. Shipping: I generally ship through the USPS due to my location. Payment options: USPS Money Orders (preferred) or Paypal with buyer adding 3% to the...

I am 99% sure this came off of a 73 dart. I used to hoard parts and 99% were 73-78 cars. I honestly do not recall if it worked or not. That car has been gone for a long time. I do know that it was parked with other issues. No visible damage on this part. PN# 3431739 Price: $45...

This is a small block housing. I think it is off of a 78 and the bolt is included. Price: $35 plus shipping. Shipping: I generally ship through the USPS due to my location. Payment options: USPS Money Orders (preferred) or Paypal with buyer adding 3% to the total. Location...

I traded a member here for this carb last fall / winter. It is the 8007 390 CFM model 4-barrel. It would be a nice carb for a 225 etc. It is used and I have not ran it. It looks good and it is complete. There is more play on the SECONDARIES than I would prefer, but the primaries are...

I have a complete rear end out of a mid-70's truck. It has 3.55's and 11 x 2.5" brakes along with the desireable 4.5" bolt-pattern. I was keeping it to narrow for a car because it has the right bolt pattern and brake size. Sold the car, so this is not needed. There are two more housings...

Loaded rear brake backing plates. They were removed from an 89 Dodge van with an 8.25 rear. They are 11" in diameter and use a 2.5" wide pad. Decent shape and should work on other mopar rear ends. I will let you do your homework on interchange. Price: $75 for the pair Location...

There are four engines that I have for sale. Basic mid-70's 400 engines. They have not been bored and are good builders. One was a runner I was told. One has basically no ridge and the other is minimal. The last one needs some definate machining but is complete. There is one 440...

The following parts are for sale. These are the front hangers that came off of an A body car. Bolt holes look good and there are no obvious issues with the parts. Need room on the shelf in the shop, and my Mopar hobby is taking a back seat for a time. Parts are sold as-is. Please PM me your...

The following parts are for sale. There are five different flexplates that are off of various small block engines. I am 99% sure they are SB 904 ones. They are all the same, just some are dirtier than others. Bolt holes look good and there are no obvious issues with the parts. Need room on the...

The following parts are for sale. There are five different ones ranging from 1971 to 1989. They are all the same, just some are dirtier than others. Bolt holes look good and there are no obvious issues with the parts. Need room on the shelf in the shop, and my Mopar hobby is taking a back...

Parts are located near Klamath Falls, in southern Oregon. I have a few misc. Mopar parts on hand that I don't need. I have more engine parts etc. than I have listed here. Ask if you are looking for something not listed. 14 x6 Ralley wheels-driver quality, I have six of them 14 x6 Steel...

http://www.summitracing.com/parts/ENS-5-1106G/ These are the inserts that you put into the factory spool mounts. They are new and in the box. They are $29 through Summit+shipping. Price: $27.50 shipped in the CONUSA Payment: USPS MO's or paypal if you kick in the 3%...

Hello, There are two sets of 16 hydraulic valve lifters for sale here. They have been on my shelf for 5-6 years. Boxed and ready to go. Both sets are $62.50 a set shipped in the continental USA. First set is the Hughes 5001 lifters. They are $5.50 each from them. Second set is...

I have the Holley Street Dominator intake for the B-series big block. It fits the 383 - 400 engine and is no longer made. It makes power, look it up in the newest ENGINE MASTERS magazine. Good condition but it needs to be repainted. Price:$150 Shipping: Yes I will ship at buyer's expense...

I will be in Portland tomorrow on 8-3-11 from mid-morning until mid-afternoon. Please get ahold of me ASAP if you want any of this stuff so I can bring it with me. Jeep 727 out of a 1980 Jeep. I have no idea on operating condition. $80 1985 V8 904 lock-up transmission. This one should...

I have the following pieces for sale. At one point in time I thought I would be building cars regularly, now I know I won't. At this point I would prefer to not separate things. Here is what I currently have on hand, more parts to come as time allows me to dig them out. Unfortunately I...

About 3 years ago I bought this convertor at a swap meet. The guy I bought it from ran mid-12's with it behind a 383. He told me it was a 3500 stall convertor. Looking up the PN on Summit racing, this is the convertor it appears: http://www.summitracing.com/parts/TCI-142222/?rtype=10 It is...

This is a sure-grip unit that came out of an 8.25 rear end. This is a common rear end used in Dodge Vans / trucks and Mopar A bodies like Dusters, Darts, etc. The unit came out of an 89 Dodge van and it had 3.55's in it. There is also a small box of misc. 8.25 parts. $95 for all of it...

I have a 489 case pumpkin with 3.55 gears in it. It is an open unit that does not have a Sure-Grip. Complete third member. Two 8 3/4 truck housings, good for narrowing. $50 for the pair, or $30 each. I have 4-5 sets of backing plates that are loaded off of various mopar car rears...

These are Richmond 4.10 ratio gears. These came out of a mid-70's 8.25 mopar car rear end. Nice condition and just pulled a week ago. They are used but very serviceable. LMK if you need pics etc. I will see what I can get to you if you PM me your address. Location: Klamath County...

This is an intake that I have had laying around for 4-5 years. I got it off of a member on BBD, maybe here. There are no stripped bolts etc. It is just too much intake for anything that I will be running in this lifetime! There are two issues that you need to be aware of: 1. The...