Search results for query: *

where is everyone drilling the large hole for the wiring connnectors with this hotwire harness ? seems like if its on the firewall wil stick out like a sore thumb . just looking for some ideas of what other ways you guys may have run yours . please let me know your thoughts and ideas, thanks ed

whats every one doing to cover up the 2.25 hole for the computer harness hole in the firewall ,any good ideas ?????? thanks ed

does anyone know what size hole you have to put in the firewall for the stock harness connector to fit thru? i am going to buy the hotwire harness and am looking at fabing up a firewall bulkhead . please let me know thanks ed aka dartman 440

hello all , when making the 545 trans mount and you have the frame rails level and the jack under the tail section , is there a certain degrees the trans should be tilting (front to back )that we are looking for so as to make sure the trans is not pointed upward or do we just go with parallel to...

what has everyone been doing for the thru firewall wiring when putting these hemis in ? is there even room to use the factory three plug bulkhead electrical connectors for the wipers and light harness? i was thinking of fabbing up something out of aluminum like they do for street rods , any...

im getting ready to do the trial fit and cut for the trans tunnel , is it possible to bring the engine up from under the car like the factory did , but with the headers on ? i am using the tti headers and the tti mounts and i will have the trans mounted to the engine as well ? any thoughts or...

im sure this has been asked before 312 times , but im asking it again . is the 2006 5.7 hemi internal or externaly balanced ? the reason im asking is because i removed the crank pulley and noticed its not keyed at all . so on re assembly we just install it with no oreintation? i see the pully...

if i have a 2006 5.7 ram hemi , and a 2005 5.7 automatic trans from a ram , which flexplate do i use . i am only going with stock pieces ? i have heard 05 an 06 may be different , can anybody confirm this ? thanks ed

is there any differance from an 2006 stock ram automatic trans. and one from an 05 , i mean like internal differances? i know 2006 has mds , does this mean a bit of differance ? thanks ed

I have a 2006 5.7 hemi out of a ram , do i need to stay with a 06 computer or is the 05 ok as well ? Can it be a 4x4 or do i want to go with a 2x4 ccomputer, is this going to matter? I want to get it running with stock computer with no flash for now ? Thanks ed

does anyone know if this is at all possible 5.7 hemi with the truck auto trans and hooking up the column shifter to it and haveing it work in a 70 duster? are these tranmissions still shifted with and arm like the old ones or are they electric? thanks ed