Search results for query: *

I know it's been quite a while since I logged in, but I came here to post that my workplace, Omix-ADA is holding a HUGE Jeep event. Here is the flyers with more information for those who are interested. It should be a blast.

I recently put a new set of headers on my truck to fix the exhaust leak the old set had and removed this set of Mr. Gasket copper header gaskets. I've always enjoyed recycling things most people scrap or huck in the trash into something truly cool or wonderful. After staring at them for a...

I've been laying in the floorboard and now have a crick in my neck from trying to straighten out some of this wiring. I think its time to get up and move around some :toothy10:

Im really trying to figure out what this cluster came from. like 100% positive what it came from. I need to get a wiring diagram for it so I can figure out how to wire it into my truck. I see all these wires hanging around and I have no clue how this cluster works. Yes, I am putting a Ford...

He is trying to stop it from running away. Watch as it hops around, unrestrained. He just keeps his cool the entire time even though the engine is running at more than twice the RPMs as redline and was probably very likely to becoming a 2 ton cast iron hand grenade at any second. Rap 24 hp...

where does he get off? I mean. The guy invites me down to his house and fed me these awesome ribs. The nerve of some folks, ya know? Then after we were done eating, he taught me how to put lower balljoints in without renting the $180 press and how to inspect them. This guy really has some...

I love the wagon wheels too. What a good use of a Civic.:D 440 Powered 1977 Honda Civic Burnout 2 - YouTube

seriously though, I've never seen a lawnmower engine go so fast in my life Worlds Fastest Postman Pat Van VS Ford Mustang (Fox Body) Drag Race @ York Raceway - YouTube

I came outside today and as usual, I went to check my oil. Well, when I pop the hood, I come to find one of the friendly neighbors came over and ripped my upper radiator hose off! Yeah, it didn't blow off and it was attached good. I found the hose clamp sitting on top of the air cleaner and...

http://nwga.craigslist.org/cto/3913566312.html seriously? this is sickening/:wack:

I decided to take my truck out for a ride and record it. well, every time I try and record my truck, the exhaust noise becomes a loud droning and makes all the audio sound like garbage and unusable. all you can hear is this vrrrrrrrrrr noise that makes everything sound like ****. even when I...

I was sitting inside avoiding the nasty storm passing over when my power went out. I grabbed some candles and lit em so I could actually see when all of a sudden I hear a loud lightning crash followed by my entire house shaking. Well, lets just say the thunder wasn't what shook my whole...

anyone know anything about these bikes or have experience fiddling with em? my friend just gave me one for free. the pedal assembly is locked up and it needs two new wheels. I have always wanted a muscle bike and my friends mom restores shwinn stingrays but she refuses to help on this bike as...

from Cuba, check these out!! :toothy10:

This seems pretty scary to me atleast Scott using the Stickler - YouTube

Don't care if its a Ford

My buddy is a Marine and needs to get his truck fixed and is looking for a good shop someone can vouch for in that area. Figured Id ask my family at FABO for some advice for one of our servicemen:D

Im looking for someone to draw up a date and time stamp off a block. The date being 11-26-90 and the time being 9

I came so close to doing cam breakin today and that stupid law struck. My engine fired up and sounded so beautiful. I started to do break in and then my belt for my alternator and water pump flew off and my radiator spring a pinhole sized leak on the top of the tank and my carbs rear float bowl...

I found this Kettler on the side of the road while going to get a belt for my truvk and had to grab it. I wanna put a motor on it. Anyone have any experience with Go karts?

Well, I am so proud of myself for pulling my new camshaft out and having done as muh as I have that I have decided to recycle my old camshaft into something still functional. Not a paper weight lol. Here's a pic of it. I am trying to think of something that is really cool.

Check this video out guys. I figured y'all would enjoy it. Especially about the restoring grandpa's old car thing. :cheers: Also, about the "my grandpa had a car just like that, it was a '71 Nova" "Uhm...this is a Duster..." :toothy10...

I snagged some pics for you guys. Only one Mopar showed up. But Damn, was it fully restored and beautiful. It belongs to the original owner. Enjoy guys :cheers: http://imgur.com/a/Fejkv

My truck has been down for a couple months now due to many different issues. He went into a long hibernation as a bone stock '74 D100 Adventurer with a 318. Today, he awakened mad as hell and ready to chew up some asphalt with his A/C deleted, A Holley 650 vac sec carb, brand new fuel pump and...

We just got one in the lot today if anyone is looking for parts for one or off one:glasses7:

I am currently working at Pull-A-Part right now, so if anyone sees something in the Atlanta North inventory they want me to check out or are looking for something specific, let me know and I may be able to help. Also, been gone a while as a I moved closer to work and had to get internet set up...

Congress declared pizza a vegetable :banghead:. Are you serious? Everyone is probably laughing at us. Next thing you know, Mexico is gonna be saying tacos are a fungus. What do you guys think of this nonsense?

Can someone tell me about these? My buddy gave me a vintage sticker from this company and would love to know a little about them, even personal stories about them. Thanks guys ahead of time :D

would relocating the leafs to the frame be a proper solution to this right here?:help: Am I gonna have to repair this anyway? The rest of the frame is solid, its just this one area, the part you see rotting out. Like even the bottom of the square tubing is pretty damn solid, its just this side...

Well, today, I kinda had a disheartening moment after my interview at Pull-A-Part while talking with a yard hand. He had told me, my first B-body I had ever driven, the '65 Coronet that was in the PAP yard a month ago was crushed:cry: Apparently, the previous owner smashed a fire hydrant with it...