Search results for query: *

Im looking for the steering gear rebuilder with the best rep today .is the builder in Oregon still in business...I have run across red head rebuilding..im looking at getting a 99 ram diesel box rebuilt and need some advise hear ..thanks ...j

I have had this car to 2 diff shops and driving it still sucks..i know little of aligning ..what im thinking of doing is to replace the upper arm bushings to offset..has anyone replaced the bushings with the spindle and lcr still connected i can remove the uca cam bolts and i have all the...

Im going to order some,wondering if anyone has ordered 4 lately..did[do ] they come 2 per box or 4 per box..RA has them for 28 but it says for 2..thanks..j

can anyone tell me what k member is used in the 70 challenger and cuda...a body or b body or is it all there own.how about the lca also...tx..j

I took off my 73[year] hose and tryed to replace it with a 73 hose..the replacement sticks way up on the inner fender.not the same as i took off...i dont want to use it ...the one i took off ,runs down along the box past the pump then comes back to the pump and down and in...i looked this...

does anyone know what size these two seals[o rings] are that go under the manifold on a power steering gear...any help would be appreciated...tx..j

Well when i got into it and removed the shaft from the p/s column no big deal with magazine article and people on this sites help...then did the manual colm and a little diff but no big deal..trouble started when i went to put power st shaft into man colmn...shaft not long enuf with lower clamp...

im going to power steering taking out manual..column for man which is in the car [black]is stick shift ..column for power steering is automatic column.[green].id like it to be all black..manual column is great shape..can i take all the pieces from nice man column and put them on the power yuk...

I would like to make and weld on some brkts for an original 73 sway bar..I have seen some pics of where they ruffly go,but exact would be better..Does anyone have dimensions or a print of where to weld brkts on thc lca for a sway bar...any help ..tx..jim